/**************************************************************************** * arch/arm/src/stm32/stm32f20xxx_dma.c * * Copyright (C) 2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "up_arch.h" #include "up_internal.h" #include "os_internal.h" #include "chip.h" #include "stm32_dma.h" #include "stm32_internal.h" /* This file supports only the STM32 F2 family (although it is identical to * the corresponding F4 file). */ #if defined(CONFIG_STM32_STM32F20XX) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define DMA1_NSTREAMS 8 #if STM32_NDMA > 1 # define DMA2_NSTREAMS 8 # define DMA_NSTREAMS (DMA1_NSTREAMS+DMA2_NSTREAMS) #else # define DMA_NSTREAMS DMA1_NSTREAMS #endif #ifndef CONFIG_DMA_PRI # define CONFIG_DMA_PRI NVIC_SYSH_PRIORITY_DEFAULT #endif /* Convert the DMA stream base address to the DMA register block address */ #define DMA_BASE(ch) (ch & 0xfffffc00) /**************************************************************************** * Private Types ****************************************************************************/ /* This structure descibes one DMA channel */ struct stm32_dma_s { uint8_t stream; /* DMA stream number (0-7) */ uint8_t irq; /* DMA stream IRQ number */ uint8_t shift; /* ISR/IFCR bit shift value */ uint8_t channel; /* DMA channel number (0-7) */ bool nonstop; /* Stream is configured in a non-stopping mode. */ sem_t sem; /* Used to wait for DMA channel to become available */ uint32_t base; /* DMA register channel base address */ dma_callback_t callback; /* Callback invoked when the DMA completes */ void *arg; /* Argument passed to callback function */ }; /**************************************************************************** * Private Data ****************************************************************************/ /* This array describes the state of each DMA */ static struct stm32_dma_s g_dma[DMA_NSTREAMS] = { { .stream = 0, .irq = STM32_IRQ_DMA1S0, .shift = DMA_INT_STREAM0_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(0), }, { .stream = 1, .irq = STM32_IRQ_DMA1S1, .shift = DMA_INT_STREAM1_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(1), }, { .stream = 2, .irq = STM32_IRQ_DMA1S2, .shift = DMA_INT_STREAM2_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(2), }, { .stream = 3, .irq = STM32_IRQ_DMA1S3, .shift = DMA_INT_STREAM3_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(4), }, { .stream = 4, .irq = STM32_IRQ_DMA1S4, .shift = DMA_INT_STREAM4_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(4), }, { .stream = 5, .irq = STM32_IRQ_DMA1S5, .shift = DMA_INT_STREAM5_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(5), }, { .stream = 6, .irq = STM32_IRQ_DMA1S6, .shift = DMA_INT_STREAM6_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(6), }, { .stream = 7, .irq = STM32_IRQ_DMA1S7, .shift = DMA_INT_STREAM7_SHIFT, .base = STM32_DMA1_BASE + STM32_DMA_OFFSET(7), }, #if STM32_NDMA > 1 { .stream = 0, .irq = STM32_IRQ_DMA2S0, .shift = DMA_INT_STREAM0_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(0), }, { .stream = 1, .irq = STM32_IRQ_DMA2S1, .shift = DMA_INT_STREAM1_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(1), }, { .stream = 2, .irq = STM32_IRQ_DMA2S2, .shift = DMA_INT_STREAM2_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(2), }, { .stream = 3, .irq = STM32_IRQ_DMA2S3, .shift = DMA_INT_STREAM3_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(3), }, { .stream = 4, .irq = STM32_IRQ_DMA2S4, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(4), }, { .stream = 5, .irq = STM32_IRQ_DMA2S5, .shift = DMA_INT_STREAM5_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(5), }, { .stream = 6, .irq = STM32_IRQ_DMA2S6, .shift = DMA_INT_STREAM6_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(6), }, { .stream = 7, .irq = STM32_IRQ_DMA2S7, .shift = DMA_INT_STREAM7_SHIFT, .base = STM32_DMA2_BASE + STM32_DMA_OFFSET(7), }, #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * DMA register access functions ****************************************************************************/ /* Get non-channel register from DMA1 or DMA2 */ static inline uint32_t dmabase_getreg(struct stm32_dma_s *dmast, uint32_t offset) { return getreg32(DMA_BASE(dmast->base) + offset); } /* Write to non-channel register in DMA1 or DMA2 */ static inline void dmabase_putreg(struct stm32_dma_s *dmast, uint32_t offset, uint32_t value) { putreg32(value, DMA_BASE(dmast->base) + offset); } /* Get channel register from DMA1 or DMA2 */ static inline uint32_t dmast_getreg(struct stm32_dma_s *dmast, uint32_t offset) { return getreg32(dmast->base + offset); } /* Write to channel register in DMA1 or DMA2 */ static inline void dmast_putreg(struct stm32_dma_s *dmast, uint32_t offset, uint32_t value) { putreg32(value, dmast->base + offset); } /************************************************************************************ * Name: stm32_dmatake() and stm32_dmagive() * * Description: * Used to get exclusive access to a DMA channel. * ************************************************************************************/ static void stm32_dmatake(FAR struct stm32_dma_s *dmast) { /* Take the semaphore (perhaps waiting) */ while (sem_wait(&dmast->sem) != 0) { /* The only case that an error should occur here is if the wait was awakened * by a signal. */ ASSERT(errno == EINTR); } } static inline void stm32_dmagive(FAR struct stm32_dma_s *dmast) { (void)sem_post(&dmast->sem); } /************************************************************************************ * Name: stm32_dmastream * * Description: * Get the g_dma table entry associated with a DMA controller and a stream number * ************************************************************************************/ static inline FAR struct stm32_dma_s *stm32_dmastream(unsigned int stream, unsigned int controller) { int index; DEBUGASSERT(stream < DMA_NSTREAMS && controller < STM32_NDMA); /* Convert the controller + stream based on the fact that there are 8 streams * per controller. */ #if STM32_NDMA > 1 index = controller << 3 | stream; #else index = stream; #endif /* Then return the stream structure associated with the stream index */ return &g_dma[index]; } /************************************************************************************ * Name: stm32_dmamap * * Description: * Get the g_dma table entry associated with a bit-encoded DMA selection * ************************************************************************************/ static inline FAR struct stm32_dma_s *stm32_dmamap(unsigned long dmamap) { /* Extract the DMA controller number from the bit encoded value */ unsigned int controller = STM32_DMA_CONTROLLER(dmamap); /* Extact the stream number from the bit encoded value */ unsigned int stream = STM32_DMA_STREAM(dmamap); /* Return the table entry associated with the controller + stream */ return stm32_dmastream(stream, controller); } /************************************************************************************ * Name: stm32_dmastreamdisable * * Description: * Disable the DMA stream * ************************************************************************************/ static void stm32_dmastreamdisable(struct stm32_dma_s *dmast) { uint32_t regoffset; uint32_t regval; /* Disable all interrupts at the DMA controller */ regval = dmast_getreg(dmast, STM32_DMA_SCR_OFFSET); regval &= ~DMA_SCR_ALLINTS; /* Disable the DMA stream */ regval &= ~DMA_SCR_EN; dmast_putreg(dmast, STM32_DMA_SCR_OFFSET, regval); /* Clear pending stream interrupts by setting bits in the upper or lower IFCR * register */ if (dmast->stream < 4) { regoffset = STM32_DMA_LIFCR_OFFSET; } else { regoffset = STM32_DMA_HIFCR_OFFSET; } dmabase_putreg(dmast, regoffset, (DMA_STREAM_MASK << dmast->shift)); } /************************************************************************************ * Name: stm32_dmainterrupt * * Description: * DMA interrupt handler * ************************************************************************************/ static int stm32_dmainterrupt(int irq, void *context) { struct stm32_dma_s *dmast; uint32_t status; uint32_t regoffset = 0; unsigned int stream = 0; unsigned int controller = 0; /* Get the stream and the controller that generated the interrupt */ if (irq >= STM32_IRQ_DMA1S0 && irq <= STM32_IRQ_DMA1S6) { stream = irq - STM32_IRQ_DMA1S0; controller = DMA1; } else if (irq == STM32_IRQ_DMA1S7) { stream = 7; controller = DMA1; } else #if STM32_NDMA > 1 if (irq >= STM32_IRQ_DMA2S0 && irq <= STM32_IRQ_DMA2S4) { stream = irq - STM32_IRQ_DMA2S0; controller = DMA2; } else if (irq >= STM32_IRQ_DMA2S5 && irq <= STM32_IRQ_DMA2S7) { stream = irq - STM32_IRQ_DMA2S5 + 5; controller = DMA2; } else #endif { PANIC(OSERR_INTERNAL); } /* Get the stream structure from the stream and controller numbers */ dmast = stm32_dmastream(stream, controller); /* Select the interrupt status register (either the LISR or HISR) * based on the stream number that caused the interrupt. */ if (stream < 4) { regoffset = STM32_DMA_LISR_OFFSET; } else { regoffset = STM32_DMA_HISR_OFFSET; } /* Get the interrupt status for this stream */ status = (dmabase_getreg(dmast, regoffset) >> dmast->shift) & DMA_STREAM_MASK; /* Clear fetched stream interrupts by setting bits in the upper or lower IFCR * register */ if (stream < 4) { regoffset = STM32_DMA_LIFCR_OFFSET; } else { regoffset = STM32_DMA_HIFCR_OFFSET; } dmabase_putreg(dmast, regoffset, (status << dmast->shift)); /* Invoke the callback */ if (dmast->callback) { dmast->callback(dmast, status, dmast->arg); } return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: stm32_dmainitialize * * Description: * Initialize the DMA subsystem * * Returned Value: * None * ****************************************************************************/ void weak_function up_dmainitialize(void) { struct stm32_dma_s *dmast; int stream; /* Initialize each DMA stream */ for (stream = 0; stream < DMA_NSTREAMS; stream++) { dmast = &g_dma[stream]; sem_init(&dmast->sem, 0, 1); /* Attach DMA interrupt vectors */ (void)irq_attach(dmast->irq, stm32_dmainterrupt); /* Disable the DMA stream */ stm32_dmastreamdisable(dmast); /* Enable the IRQ at the NVIC (still disabled at the DMA controller) */ up_enable_irq(dmast->irq); /* Set the interrrupt priority */ up_prioritize_irq(dmast->irq, CONFIG_DMA_PRI); } } /**************************************************************************** * Name: stm32_dmachannel * * Description: * Allocate a DMA channel. This function gives the caller mutually * exclusive access to the DMA channel specified by the 'dmamap' argument. * DMA channels are shared on the STM32: Devices sharing the same DMA * channel cannot do DMA concurrently! See the DMACHAN_* definitions in * stm32_dma.h. * * If the DMA channel is not available, then stm32_dmachannel() will wait * until the holder of the channel relinquishes the channel by calling * stm32_dmafree(). WARNING: If you have two devices sharing a DMA * channel and the code never releases the channel, the stm32_dmachannel * call for the other will hang forever in this function! Don't let your * design do that! * * Hmm.. I suppose this interface could be extended to make a non-blocking * version. Feel free to do that if that is what you need. * * Input parameter: * dmamap - Identifies the stream/channel resource. For the STM32 F2, this * is a bit-encoded value as provided by the the DMAMAP_* definitions * in chip/stm32f20xxx_dma.h * * Returned Value: * Provided that 'dmamap' is valid, this function ALWAYS returns a non-NULL, * void* DMA channel handle. (If 'dmamap' is invalid, the function will * assert if debug is enabled or do something ignorant otherwise). * * Assumptions: * - The caller does not hold he DMA channel. * - The caller can wait for the DMA channel to be freed if it is no * available. * ****************************************************************************/ DMA_HANDLE stm32_dmachannel(unsigned int dmamap) { FAR struct stm32_dma_s *dmast; /* Get the stream index from the bit-encoded channel value */ dmast = stm32_dmamap(dmamap); DEBUGASSERT(dmast != NULL); /* Get exclusive access to the DMA channel -- OR wait until the channel * is available if it is currently being used by another driver */ stm32_dmatake(dmast); /* The caller now has exclusive use of the DMA channel. Assign the * channel to the stream and return an opaque reference to the stream * structure. */ dmast->channel = STM32_DMA_CHANNEL(dmamap); return (DMA_HANDLE)dmast; } /**************************************************************************** * Name: stm32_dmafree * * Description: * Release a DMA channel. If another thread is waiting for this DMA channel * in a call to stm32_dmachannel, then this function will re-assign the * DMA channel to that thread and wake it up. NOTE: The 'handle' used * in this argument must NEVER be used again until stm32_dmachannel() is * called again to re-gain access to the channel. * * Returned Value: * None * * Assumptions: * - The caller holds the DMA channel. * - There is no DMA in progress * ****************************************************************************/ void stm32_dmafree(DMA_HANDLE handle) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; DEBUGASSERT(handle != NULL); /* Release the channel */ stm32_dmagive(dmast); } /**************************************************************************** * Name: stm32_dmasetup * * Description: * Configure DMA before using * ****************************************************************************/ void stm32_dmasetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t ntransfers, uint32_t scr) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; uint32_t regoffset; uint32_t regval; dmadbg("paddr: %08x maddr: %08x ntransfers: %d scr: %08x\n", paddr, maddr, ntransfers, scr); /* "If the stream is enabled, disable it by resetting the EN bit in the * DMA_SxCR register, then read this bit in order to confirm that there is no * ongoing stream operation. Writing this bit to 0 is not immediately * effective since it is actually written to 0 once all the current transfers * have finished. When the EN bit is read as 0, this means that the stream is * ready to be configured. It is therefore necessary to wait for the EN bit * to be cleared before starting any stream configuration. ..." */ while ((dmast_getreg(dmast, STM32_DMA_SCR_OFFSET) & DMA_SCR_EN) != 0); /* "... All the stream dedicated bits set in the status register (DMA_LISR * and DMA_HISR) from the previous data block DMA transfer should be cleared * before the stream can be re-enabled." * * Clear pending stream interrupts by setting bits in the upper or lower IFCR * register */ if (dmast->stream < 4) { regoffset = STM32_DMA_LIFCR_OFFSET; } else { regoffset = STM32_DMA_HIFCR_OFFSET; } dmabase_putreg(dmast, regoffset, (DMA_STREAM_MASK << dmast->shift)); /* "Set the peripheral register address in the DMA_SPARx register. The data * will be moved from/to this address to/from the memory after the * peripheral event. */ dmast_putreg(dmast, STM32_DMA_SPAR_OFFSET, paddr); /* "Set the memory address in the DMA_SM0ARx ... register. The data will be * written to or read from this memory after the peripheral event." * * Note that in double-buffered mode it is explicitly assumed that the second * buffer immediately follows the first. */ dmast_putreg(dmast, STM32_DMA_SM0AR_OFFSET, maddr); if (scr & DMA_SCR_DBM) { dmast_putreg(dmast, STM32_DMA_SM1AR_OFFSET, maddr + ntransfers); } /* "Configure the total number of data items to be transferred in the * DMA_SNDTRx register. After each peripheral event, this value will be * decremented." * * "When the peripheral flow controller is used for a given stream, the value * written into the DMA_SxNDTR has no effect on the DMA transfer. Actually, * whatever the value written, it will be forced by hardware to 0xFFFF as soon * as the stream is enabled..." */ dmast_putreg(dmast, STM32_DMA_SNDTR_OFFSET, ntransfers); /* "Select the DMA channel (request) using CHSEL[2:0] in the DMA_SxCR register." * * "Configure the stream priority using the PL[1:0] bits in the DMA_SCRx" * register." */ regval = dmast_getreg(dmast, STM32_DMA_SCR_OFFSET); regval &= ~(DMA_SCR_PL_MASK|DMA_SCR_CHSEL_MASK); regval |= scr & DMA_SCR_PL_MASK; regval |= (uint32_t)dmast->channel << DMA_SCR_CHSEL_SHIFT; dmast_putreg(dmast, STM32_DMA_SCR_OFFSET, regval); /* "Configure the FIFO usage (enable or disable, threshold in transmission and * reception)" * * "Caution is required when choosing the FIFO threshold (bits FTH[1:0] of the * DMA_SxFCR register) and the size of the memory burst (MBURST[1:0] of the * DMA_SxCR register): The content pointed by the FIFO threshold must exactly * match to an integer number of memory burst transfers. If this is not in the * case, a FIFO error (flag FEIFx of the DMA_HISR or DMA_LISR register) will be * generated when the stream is enabled, then the stream will be automatically * disabled." * * The FIFO is disabled in circular mode when transferring data from a * peripheral to memory, as in this case it is usually desirable to know that * every byte from the peripheral is transferred immediately to memory. It is * not practical to flush the DMA FIFO, as this requires disabling the channel * which triggers the transfer-complete interrupt. * * NOTE: The FEIFx error interrupt is not enabled because the FEIFx seems to * be reported spuriously causing good transfers to be marked as failures. */ regval = dmast_getreg(dmast, STM32_DMA_SFCR_OFFSET); regval &= ~(DMA_SFCR_FTH_MASK | DMA_SFCR_FS_MASK | DMA_SFCR_FEIE); if (!((scr & (DMA_SCR_CIRC | DMA_SCR_DIR_MASK)) == (DMA_SCR_CIRC | DMA_SCR_DIR_P2M))) { regval |= (DMA_SFCR_FTH_FULL | DMA_SFCR_DMDIS); } dmast_putreg(dmast, STM32_DMA_SFCR_OFFSET, regval); /* "Configure data transfer direction, circular mode, peripheral & memory * incremented mode, peripheral & memory data size, and interrupt after * half and/or full transfer in the DMA_CCRx register." * * Note: The CT bit is always reset. */ regval = dmast_getreg(dmast, STM32_DMA_SCR_OFFSET); regval &= ~(DMA_SCR_PFCTRL|DMA_SCR_DIR_MASK|DMA_SCR_PINC|DMA_SCR_MINC| DMA_SCR_PSIZE_MASK|DMA_SCR_MSIZE_MASK|DMA_SCR_PINCOS| DMA_SCR_CIRC|DMA_SCR_DBM|DMA_SCR_CT| DMA_SCR_PBURST_MASK|DMA_SCR_MBURST_MASK); scr &= (DMA_SCR_PFCTRL|DMA_SCR_DIR_MASK|DMA_SCR_PINC|DMA_SCR_MINC| DMA_SCR_PSIZE_MASK|DMA_SCR_MSIZE_MASK|DMA_SCR_PINCOS| DMA_SCR_DBM|DMA_SCR_CIRC| DMA_SCR_PBURST_MASK|DMA_SCR_MBURST_MASK); regval |= scr; dmast->nonstop = (scr & (DMA_SCR_DBM|DMA_SCR_CIRC)) != 0; dmast_putreg(dmast, STM32_DMA_SCR_OFFSET, regval); } /**************************************************************************** * Name: stm32_dmastart * * Description: * Start the DMA transfer * * Assumptions: * - DMA handle allocated by stm32_dmachannel() * - No DMA in progress * ****************************************************************************/ void stm32_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg, bool half) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; uint32_t scr; DEBUGASSERT(handle != NULL); /* Save the callback info. This will be invoked whent the DMA commpletes */ dmast->callback = callback; dmast->arg = arg; /* Activate the stream by setting the ENABLE bit in the DMA_SCRx register. * As soon as the stream is enabled, it can serve any DMA request from the * peripheral connected on the stream. */ scr = dmast_getreg(dmast, STM32_DMA_SCR_OFFSET); scr |= DMA_SCR_EN; if (!dmast->nonstop) { /* Once half of the bytes are transferred, the half-transfer flag (HTIF) is * set and an interrupt is generated if the Half-Transfer Interrupt Enable * bit (HTIE) is set. At the end of the transfer, the Transfer Complete Flag * (TCIF) is set and an interrupt is generated if the Transfer Complete * Interrupt Enable bit (TCIE) is set. */ scr |= (half ? (DMA_SCR_HTIE|DMA_SCR_TEIE) : (DMA_SCR_TCIE|DMA_SCR_TEIE)); } else { /* In nonstop mode, when the transfer completes it immediately resets * and starts again. The transfer-complete interrupt is thus always * enabled, and the half-complete interrupt can be used in circular * mode to determine when the buffer is half-full, or in double-buffered * mode to determine when one of the two buffers is full. */ scr |= (half ? DMA_SCR_HTIE : 0) | DMA_SCR_TCIE | DMA_SCR_TEIE; } dmast_putreg(dmast, STM32_DMA_SCR_OFFSET, scr); } /**************************************************************************** * Name: stm32_dmastop * * Description: * Cancel the DMA. After stm32_dmastop() is called, the DMA channel is * reset and stm32_dmasetup() must be called before stm32_dmastart() can be * called again * * Assumptions: * - DMA handle allocated by stm32_dmachannel() * ****************************************************************************/ void stm32_dmastop(DMA_HANDLE handle) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; stm32_dmastreamdisable(dmast); } /**************************************************************************** * Name: stm32_dmaresidual * * Description: * Read the DMA bytes-remaining register. * * Assumptions: * - DMA handle allocated by stm32_dmachannel() * ****************************************************************************/ size_t stm32_dmaresidual(DMA_HANDLE handle) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; uint32_t residual; /* Fetch the count of bytes remaining to be transferred. * * If the FIFO is enabled, this count may be inaccurate. ST don't * appear to document whether this counts the peripheral or the memory * side of the channel, and they don't make the memory pointer * available either. * * For reception in circular mode the FIFO is disabled in order that * this value can be useful. */ residual = dmast_getreg(dmast, STM32_DMA_SNDTR_OFFSET); return (size_t)residual; } /**************************************************************************** * Name: stm32_dmasample * * Description: * Sample DMA register contents * * Assumptions: * - DMA handle allocated by stm32_dmachannel() * ****************************************************************************/ #ifdef CONFIG_DEBUG_DMA void stm32_dmasample(DMA_HANDLE handle, struct stm32_dmaregs_s *regs) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; irqstate_t flags; flags = irqsave(); regs->lisr = dmabase_getreg(dmast, STM32_DMA_LISR_OFFSET); regs->hisr = dmabase_getreg(dmast, STM32_DMA_HISR_OFFSET); regs->scr = dmast_getreg(dmast, STM32_DMA_SCR_OFFSET); regs->sndtr = dmast_getreg(dmast, STM32_DMA_SNDTR_OFFSET); regs->spar = dmast_getreg(dmast, STM32_DMA_SPAR_OFFSET); regs->sm0ar = dmast_getreg(dmast, STM32_DMA_SM0AR_OFFSET); regs->sm1ar = dmast_getreg(dmast, STM32_DMA_SM1AR_OFFSET); regs->sfcr = dmast_getreg(dmast, STM32_DMA_SFCR_OFFSET); irqrestore(flags); } #endif /**************************************************************************** * Name: stm32_dmadump * * Description: * Dump previously sampled DMA register contents * * Assumptions: * - DMA handle allocated by stm32_dmachannel() * ****************************************************************************/ #ifdef CONFIG_DEBUG_DMA void stm32_dmadump(DMA_HANDLE handle, const struct stm32_dmaregs_s *regs, const char *msg) { struct stm32_dma_s *dmast = (struct stm32_dma_s *)handle; uint32_t dmabase = DMA_BASE(dmast->base); dmadbg("DMA Registers: %s\n", msg); dmadbg(" LISR[%08x]: %08x\n", dmabase + STM32_DMA_LISR_OFFSET, regs->lisr); dmadbg(" HISR[%08x]: %08x\n", dmabase + STM32_DMA_HISR_OFFSET, regs->hisr); dmadbg(" SCR[%08x]: %08x\n", dmast->base + STM32_DMA_SCR_OFFSET, regs->scr); dmadbg(" SNDTR[%08x]: %08x\n", dmast->base + STM32_DMA_SNDTR_OFFSET, regs->sndtr); dmadbg(" SPAR[%08x]: %08x\n", dmast->base + STM32_DMA_SPAR_OFFSET, regs->spar); dmadbg(" SM0AR[%08x]: %08x\n", dmast->base + STM32_DMA_SM0AR_OFFSET, regs->sm0ar); dmadbg(" SM1AR[%08x]: %08x\n", dmast->base + STM32_DMA_SM1AR_OFFSET, regs->sm1ar); dmadbg(" SFCR[%08x]: %08x\n", dmast->base + STM32_DMA_SFCR_OFFSET, regs->sfcr); } #endif #endif /* CONFIG_STM32_STM32F20XX */