/**************************************************************************** * arch/arm/src/lpc17xx/lpc17_allocateheap.c * * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include "chip.h" #include "up_arch.h" #include "up_internal.h" #include "lpc17_memorymap.h" #include "lpc17_emacram.h" #include "lpc17_ohciram.h" /**************************************************************************** * Private Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* The configured RAM start address must be the beginning of CPU SRAM */ #if CONFIG_DRAM_START != LPC17_SRAM_BASE # warning "CONFIG_DRAM_START is not at LPC17_SRAM_BASE" # undef CONFIG_DRAM_START # undef CONFIG_DRAM_END # define CONFIG_DRAM_START LPC17_SRAM_BASE # define CONFIG_DRAM_END (LPC17_SRAM_BASE+LPC17_CPUSRAM_SIZE) #endif /* The configured RAM size must be less then or equal to the CPU SRAM size */ #if CONFIG_DRAM_SIZE > LPC17_CPUSRAM_SIZE # warning "CONFIG_DRAM_SIZE is larger than the size of CPU SRAM" # undef CONFIG_DRAM_SIZE # undef CONFIG_DRAM_END # define CONFIG_DRAM_SIZE LPC17_CPUSRAM_SIZE # define CONFIG_DRAM_END (LPC17_SRAM_BASE+LPC17_CPUSRAM_SIZE) #elif CONFIG_DRAM_SIZE < LPC17_CPUSRAM_SIZE # warning "CONFIG_DRAM_END is before end of CPU SRAM... not all of CPU SRAM used" #endif /* Figure out how much heap be have in AHB SRAM (if any). Complications: * 1) AHB SRAM Bank 0 or 1 may on may not be supported in the hardware. * 2) Some or all of Bank 0 may be used for Ethernet Packet buffering. * Ethernet packet buffering is used from the beginning of Bank 0 and * any free memory at the end of Bank 0 will be contiguous with any * free memory at the beginning of Bank 1. * 3) Some or all of Bank 1 may be used for OHCI descriptor memory. OCHI * memory is used from the end of Bank 1 and any free memory at the * beginning of Bank 1 will be contiguous with any free memory at the * end of Bank 0. */ #undef LPC17_AHB_HEAPBASE /* Assume that nothing is available */ #undef LPC17_AHB_HEAPSIZE /* If we have Bank 0, then we may possibly also have Bank 1 */ #ifdef LPC17_HAVE_BANK0 /* We have BANK0 (and, hence, possibly Bank1). Is Bank0 all used for * Ethernet packet buffering? Or is there any part of Bank0 available for * the heap. */ # ifdef LPC17_BANK0_HEAPSIZE /* Some or all of Bank0 is available for the heap. The heap will begin * in bank 1. */ # define LPC17_AHB_HEAPBASE LPC17_BANK0_HEAPBASE /* Is Bank1 present? Has there available heap memory in Bank 1? */ # if defined(LPC17_HAVE_BANK1) && defined(LPC17_BANK1_HEAPSIZE) /* Yes... the heap space available is the unused memory at the end * of Bank0 plus the unused memory at the beginning of Bank 1. */ # define LPC17_AHB_HEAPSIZE (LPC17_BANK0_HEAPSIZE + LPC17_BANK1_HEAPSIZE) # else /* No... the heap space available is only the unused memory at the * end of Bank 0. */ # define LPC17_AHB_HEAPSIZE LPC17_BANK0_HEAPSIZE # endif /* LPC17_HAVE_BANK1 && LPC17_BANK1_HEAPSIZE */ # else /* !LPC17_BANK0_HEAPSIZE */ /* We have Bnak 0, but no memory is available for the heap there. * Do we have Bank 1? Is any heap memory available in Bank 1? */ # if defined(LPC17_HAVE_BANK1) && defined(LPC17_BANK1_HEAPSIZE) /* Yes... the heap space available is the unused memory at the * beginning of Bank1. */ # define LPC17_AHB_HEAPBASE LPC17_BANK1_HEAPBASE # define LPC17_AHB_HEAPSIZE LPC17_BANK1_HEAPSIZE # endif /* LPC17_HAVE_BANK1 && LPC17_BANK1_HEAPSIZE */ # endif /* LPC17_BANK0_HEAPSIZE */ #endif /* LPC17_HAVE_BANK0 */ /* Sanity checking */ #ifdef LPC17_AHB_HEAPBASE # if CONFIG_MM_REGIONS < 2 # warning "CONFIG_MM_REGIONS < 2: Available AHB SRAM Bank(s) not included in HEAP" # endif # if CONFIG_MM_REGIONS > 2 # warning "CONFIG_MM_REGIONS > 2: Are additional regions handled by application?" # endif #else # if CONFIG_MM_REGIONS > 1 # warning "CONFIG_MM_REGIONS > 1: This configuration has no available AHB SRAM Bank0/1" # warning "CONFIG_MM_REGIONS > 1: Are additional regions handled by application?" # endif #endif /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: up_allocate_heap * * Description: * The heap may be statically allocated by * defining CONFIG_HEAP_BASE and CONFIG_HEAP_SIZE. If these * are not defined, then this function will be called to * dynamically set aside the heap region. * ****************************************************************************/ void up_allocate_heap(FAR void **heap_start, size_t *heap_size) { up_ledon(LED_HEAPALLOCATE); *heap_start = (FAR void*)g_heapbase; *heap_size = CONFIG_DRAM_END - g_heapbase; } /************************************************************************ * Name: up_addregion * * Description: * Memory may be added in non-contiguous chunks. Additional chunks are * added by calling this function. * ************************************************************************/ #if CONFIG_MM_REGIONS > 1 void up_addregion(void) { /* Banks 0 and 1 are each 16Kb. If both are present, they occupy a * contiguous 32Kb memory region. * * If Ethernet is enabled, it will take some or all of bank 0 for packet * buffering and descriptor tables; If USB host is enabled, it will take * some or all of bank 1 for descriptor memory. The complex conditional * compilation above should boil this all down to a very simple check * here: * * Is any memory available in AHB SRAM for the heap? */ #ifdef LPC17_AHB_HEAPBASE /* Yes... Add the AHB SRAM heap region. */ mm_addregion((FAR void*)LPC17_AHB_HEAPBASE, LPC17_AHB_HEAPSIZE); #endif } #endif