From fb3025d62c99842e6bb04cab963dd98368618060 Mon Sep 17 00:00:00 2001 From: patacongo Date: Fri, 27 May 2011 15:26:52 +0000 Subject: Rename all lpc313x to lpc31xx git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@3644 7fd9a85b-ad96-42d3-883c-3090e2eb8679 --- nuttx/configs/ea3131/ostest/Make.defs | 10 ++--- nuttx/configs/ea3131/ostest/defconfig | 84 +++++++++++++++++------------------ nuttx/configs/ea3131/ostest/ld.script | 2 +- 3 files changed, 48 insertions(+), 48 deletions(-) (limited to 'nuttx/configs/ea3131/ostest') diff --git a/nuttx/configs/ea3131/ostest/Make.defs b/nuttx/configs/ea3131/ostest/Make.defs index 25cb28b704..fd72ded9df 100755 --- a/nuttx/configs/ea3131/ostest/Make.defs +++ b/nuttx/configs/ea3131/ostest/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/ostest/defconfig b/nuttx/configs/ea3131/ostest/defconfig index f085980bac..0027aa2429 100755 --- a/nuttx/configs/ea3131/ostest/defconfig +++ b/nuttx/configs/ea3131/ostest/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=n -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=y +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=n +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=y # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -535,20 +535,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/ostest/ld.script b/nuttx/configs/ea3131/ostest/ld.script index 1e1f0ff391..531e64ce92 100755 --- a/nuttx/configs/ea3131/ostest/ld.script +++ b/nuttx/configs/ea3131/ostest/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. */ -- cgit v1.2.3