From bc2af164e047abae45230c760e2a5d288586295e Mon Sep 17 00:00:00 2001 From: patacongo Date: Sun, 9 May 2010 16:36:07 +0000 Subject: Add LM3S6965 NSH configuration + Prep for 5.5 release git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@2659 7fd9a85b-ad96-42d3-883c-3090e2eb8679 --- nuttx/ReleaseNotes | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) (limited to 'nuttx/ReleaseNotes') diff --git a/nuttx/ReleaseNotes b/nuttx/ReleaseNotes index 7618bc7d04..3c6dda5f71 100644 --- a/nuttx/ReleaseNotes +++ b/nuttx/ReleaseNotes @@ -1221,8 +1221,33 @@ This initial release of this feature includes the verified NX extensions plus a driver for the HX8347, 16-bit parallel LCD. This LCD supports 16-bit RGB (5:6:5). +nuttx-5.5 +^^^^^^^^^ - * include/nuttx/lcd.h - Defines an LCD interface. - * graphics/nxglib/fb and lcd - Support LCD and framebuffer rasterizers for NX. - * configs/sam3u-ek/src/up_lcd.c - LCD driver for LCD on SAM3U-EK development - board. +This is the 52nd release of NuttX. This release includes one new port, some +new drivers and some important bugfixes: + + * NuttX was ported to the Luminary/TI LM3S6965 Ethernet Evaluation Kit. + At present, that port includes an OS test configuration and a NuttShell + (NSH) configuration with telnet support. + + MMC/SD and Networking support are provided but not thoroughly verified + in this release: Current development efforts are focused on porting the + NuttX window system (NX) to work with the Evaluation Kits OLED display. + + * A NuttX Ethernet driver for the Microchip ENC28J60 SPI Ethernet chip is + available in the source tree (but has not yet been fully verified because + I haven't properly connected it to hardware yet). + + * The Olimex STR-P711 NuttX port was extended to support the ENC28J60 and + some new networking configurations were added. The ENC28J60 has not + been tested on the STR-P711, however, because of hardware issues (I don't + think the USB powered board provides enough power for the ENC28J60 and + I don't have the right wall wart yet). + + Along the way, external interrupt support (XTI) was added to the STMicro + STR-P711 port and some important bugs were fixed in the STR-P711 SPI + driver. + + * Corrected an important UDP reference counting error. It was not a serious + error, but it trigger an assertion was IS a serious error. -- cgit v1.2.3