summaryrefslogtreecommitdiffstats
path: root/nuttx/configs/ntosd-dm320/poll/defconfig
diff options
context:
space:
mode:
Diffstat (limited to 'nuttx/configs/ntosd-dm320/poll/defconfig')
-rw-r--r--nuttx/configs/ntosd-dm320/poll/defconfig257
1 files changed, 2 insertions, 255 deletions
diff --git a/nuttx/configs/ntosd-dm320/poll/defconfig b/nuttx/configs/ntosd-dm320/poll/defconfig
index 5e643db4db..3fcdc7a73c 100644
--- a/nuttx/configs/ntosd-dm320/poll/defconfig
+++ b/nuttx/configs/ntosd-dm320/poll/defconfig
@@ -33,30 +33,7 @@
#
############################################################################
#
-# architecture selection
-#
-# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
-# processor architecture.
-# CONFIG_ARCH_family - for use in C code. This identifies the
-# particular chip family that the architecture is implemented
-# in.
-# CONFIG_ARCH_architecture - for use in C code. This identifies the
-# specific architecture within the chip familyl.
-# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
-# CONFIG_ARCH_CHIP_name - For use in C code
-# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
-# the board that supports the particular chip or SoC.
-# CONFIG_ARCH_BOARD_name - for use in C code
-# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
-# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
-# CONFIG_DRAM_SIZE - Describes the installed DRAM.
-# CONFIG_DRAM_START - The start address of DRAM (physical)
-# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
-# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
-# stack. If defined, this symbol is the size of the interrupt
-# stack in bytes. If not defined, the user task stacks will be
-# used during interrupt handling.
-# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# Architecture Selection
#
CONFIG_ARCH="arm"
CONFIG_ARCH_ARM=y
@@ -76,12 +53,6 @@ CONFIG_ARCH_STACKDUMP=n
#
# ARM-specific configuration
#
-# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000
-# Undefine if vectors reside at address 0xffff:0000
-# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available.
-# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR,
-# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h
-#
CONFIG_ARCH_LOWVECTORS=n
CONFIG_ARCH_ROMPGTABLE=n
@@ -96,17 +67,6 @@ CONFIG_DM320_BUILDROOT=n
#
# DM320 specific device driver settings
#
-# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
-# console and ttys0 (default is the UART0).
-# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
-# This specific the size of the receive buffer
-# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
-# being sent. This specific the size of the transmit buffer
-# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
-# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
-# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
-# CONFIG_UARTn_2STOP - Two stop bits
-#
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_UART1_SERIAL_CONSOLE=n
CONFIG_UART0_TXBUFSIZE=256
@@ -125,16 +85,6 @@ CONFIG_UART1_2STOP=0
#
# General build options
#
-# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
-# BSPs from www.ridgerun.com using the tools/mkimage.sh script
-# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
-# used with many different loaders using the GNU objcopy program
-# Should not be selected if you are not using the GNU toolchain.
-# CONFIG_RAW_BINARY - make a raw binary format file used with many
-# different loaders using the GNU objcopy program. This option
-# should not be selected if you are not using the GNU toolchain.
-# CONFIG_HAVE_LIBM - toolchain supports libm.a
-#
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_RAW_BINARY=y
@@ -143,72 +93,6 @@ CONFIG_HAVE_LIBM=n
#
# General OS setup
#
-# CONFIG_APPS_DIR - Identifies the relative path to the directory
-# that builds the application to link with NuttX. Default: ../apps
-# CONFIG_DEBUG - enables built-in debug options
-# CONFIG_DEBUG_VERBOSE - enables verbose debug output
-# CONFIG_DEBUG_SYMBOLS - build without optimization and with
-# debug symbols (needed for use with a debugger).
-# CONFIG_MM_REGIONS - If the architecture includes multiple
-# regions of memory to allocate from, this specifies the
-# number of memory regions that the memory manager must
-# handle and enables the API mm_addregion(start, end);
-# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
-# time console output
-# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
-# or MSEC_PER_TICK=10. This setting may be defined to
-# inform NuttX that the processor hardware is providing
-# system timer interrupts at some interrupt interval other
-# than 10 msec.
-# CONFIG_RR_INTERVAL - The round robin timeslice will be set
-# this number of milliseconds; Round robin scheduling can
-# be disabled by setting this value to zero.
-# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
-# scheduler to monitor system performance
-# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
-# task name to save in the TCB. Useful if scheduler
-# instrumentation is selected. Set to zero to disable.
-# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
-# Used to initialize the internal time logic.
-# CONFIG_JULIAN_TIME - Enables Julian time conversions
-# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
-# provides /dev/console. Enables stdout, stderr, stdin.
-# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
-# driver (minimul support)
-# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
-# errorcheck mutexes. Enables pthread_mutexattr_settype().
-# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
-# inheritance on mutexes and semaphores.
-# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-# inheritance is enabled. It defines the maximum number of
-# different threads (minus one) that can take counts on a
-# semaphore with priority inheritance support. This may be
-# set to zero if priority inheritance is disabled OR if you
-# are only using semaphores as mutexes (only one holder) OR
-# if no more than two threads participate using a counting
-# semaphore.
-# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
-# then this setting is the maximum number of higher priority
-# threads (minus 1) than can be waiting for another thread
-# to release a count on a semaphore. This value may be set
-# to zero if no more than one thread is expected to wait for
-# a semaphore.
-# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
-# by task_create() when a new task is started. If set, all
-# files/drivers will appear to be closed in the new task.
-# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
-# three file descriptors (stdin, stdout, stderr) by task_create()
-# when a new task is started. If set, all files/drivers will
-# appear to be closed in the new task except for stdin, stdout,
-# and stderr.
-# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
-# desciptors by task_create() when a new task is started. If
-# set, all sockets will appear to be closed in the new task.
-# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
-# This format will support execution of NuttX binaries located
-# in a ROMFS filesystem (see examples/nxflat).
-#
-#CONFIG_APPS_DIR=
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_DEBUG_SYMBOLS=n
@@ -259,9 +143,6 @@ CONFIG_DISABLE_POLL=n
#
# Misc libc settings
#
-# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
-# little smaller if we do not support fieldwidthes
-#
CONFIG_NOPRINTF_FIELDWIDTH=n
#
@@ -284,38 +165,6 @@ CONFIG_ARCH_BZERO=n
#
# Sizes of configurable things (0 disables)
#
-# CONFIG_MAX_TASKS - The maximum number of simultaneously
-# active tasks. This value must be a power of two.
-# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
-# of parameters that a task may receive (i.e., maxmum value
-# of 'argc')
-# CONFIG_NPTHREAD_KEYS - The number of items of thread-
-# specific data that can be retained
-# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
-# descriptors (one for each open)
-# CONFIG_NFILE_STREAMS - The maximum number of streams that
-# can be fopen'ed
-# CONFIG_NAME_MAX - The maximum size of a file name.
-# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
-# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_NUNGET_CHARS - Number of characters that can be
-# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
-# structures. The system manages a pool of preallocated
-# message structures to minimize dynamic allocations
-# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
-# a fixed payload size given by this settin (does not include
-# other message structure overhead.
-# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
-# can be passed to a watchdog handler
-# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
-# structures. The system manages a pool of preallocated
-# watchdog structures to minimize dynamic allocations
-# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
-# timer structures. The system manages a pool of preallocated
-# timer structures to minimize dynamic allocations. Set to
-# zero for all dynamic allocations.
-#
CONFIG_MAX_TASKS=64
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
@@ -332,29 +181,6 @@ CONFIG_PREALLOC_TIMERS=8
#
# TCP/IP and UDP support via uIP
-# CONFIG_NET - Enable or disable all network features
-# CONFIG_NET_IPv6 - Build in support for IPv6
-# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
-# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
-# CONFIG_NET_BUFSIZE - uIP buffer size
-# CONFIG_NET_TCP - TCP support on or off
-# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
-# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
-# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
-# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
-# accept() is called. The size of the backlog is selected when listen() is called.
-# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
-# CONFIG_NET_UDP - UDP support on or off
-# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
-# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
-# CONFIG_NET_ICMP - ICMP ping response support on or off
-# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
-# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
-# CONFIG_NET_STATISTICS - uIP statistics on or off
-# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
-# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
-# CONFIG_NET_BROADCAST - Broadcast support
-# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
#
CONFIG_NET=y
CONFIG_NET_IPv6=n
@@ -380,29 +206,13 @@ CONFIG_NET_BROADCAST=n
#
# UIP Network Utilities
-# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
-# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# USB Device Configuration
#
-# CONFIG_USBDEV
-# Enables USB device support
-# CONFIG_USBDEV_ISOCHRONOUS
-# Build in extra support for isochronous endpoints
-# CONFIG_USBDEV_DUALSPEED
-# Hardware handles high and full speed operation (USB 2.0)
-# CONFIG_USBDEV_SELFPOWERED
-# Will cause USB features to indicate that the device is
-# self-powered
-# CONFIG_USBDEV_MAXPOWER
-# Maximum power consumption in mA
-# CONFIG_USBDEV_TRACE
-# Enables USB tracing for debug
-# CONFIG_USBDEV_TRACE_NRECORDS
-# Number of trace entries to remember
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
CONFIG_USBDEV_DUALSPEED=n
@@ -414,12 +224,6 @@ CONFIG_USBDEV_TRACE_NRECORDS=128
#
# DM320 USB Configuration
#
-# CONFIG_DM320_GIO_USBATTACH
-# GIO that detects USB attach/detach events
-# CONFIG_DM320_GIO_USBDPPULLUP
-# GIO
-# CONFIG_DMA320_USBDEV_DMA
-# Enable DM320-specific DMA support
CONFIG_DM320_GIO_USBATTACH=6
CONFIG_DM320_GIO_USBDPPULLUP=17
CONFIG_DM320_VENDORID=0xd320
@@ -429,25 +233,6 @@ CONFIG_DM320_USBDEV_DMA=n
#
# USB Serial Device Configuration
#
-# CONFIG_PL2303
-# Enable compilation of the USB serial driver
-# CONFIG_PL2303_EPINTIN
-# The logical 7-bit address of a hardware endpoint that supports
-# interrupt IN operation
-# CONFIG_PL2303_EPBULKOUT
-# The logical 7-bit address of a hardware endpoint that supports
-# bulk OUT operation
-# CONFIG_PL2303_EPBULKIN
-# The logical 7-bit address of a hardware endpoint that supports
-# bulk IN operation
-# CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS
-# The number of write/read requests that can be in flight
-# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR
-# The vendor ID code/string
-# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR
-# The product ID code/string
-# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE
-# Size of the serial receive/transmit buffers
CONFIG_PL2303=n
CONFIG_PL2303_EPINTIN=3
CONFIG_PL2303_EPBULKOUT=2
@@ -464,25 +249,6 @@ CONFIG_PL2303_TXBUFSIZE=512
#
# USB Storage Device Configuration
#
-# CONFIG_USBMSC
-# Enable compilation of the USB storage driver
-# CONFIG_USBMSC_EP0MAXPACKET
-# Max packet size for endpoint 0
-# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN
-# The logical 7-bit address of a hardware endpoints that support
-# bulk OUT and IN operations
-# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS
-# The number of write/read requests that can be in flight
-# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN
-# The size of the buffer in each write/read request. This
-# value needs to be at least as large as the endpoint
-# maxpacket and ideally as large as a block device sector.
-# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR
-# The vendor ID code/string
-# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR
-# The product ID code/string
-# CONFIG_USBMSC_REMOVABLE
-# Select if the media is removable
CONFIG_USBMSC=n
CONFIG_USBMSC_EP0MAXPACKET=64
CONFIG_USBMSC_EPBULKOUT=2
@@ -550,25 +316,6 @@ CONFIG_DM9X_ETRANS=n
#
# Stack and heap information
#
-# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
-# operation from FLASH but must copy initialized .data sections to RAM.
-# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
-# but copy themselves entirely into RAM for better performance.
-# CONFIG_CUSTOM_STACK - The up_ implementation will handle
-# all stack operations outside of the nuttx model.
-# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
-# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
-# This is the thread that (1) performs the inital boot of the system up
-# to the point where user_start() is spawned, and (2) there after is the
-# IDLE thread that executes only when there is no other thread ready to
-# run.
-# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
-# for the main user thread that begins at the user_start() entry point.
-# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
-# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
-# CONFIG_HEAP_BASE - The beginning of the heap
-# CONFIG_HEAP_SIZE - The size of the heap
-#
CONFIG_BOOT_RUNFROMFLASH=n
CONFIG_BOOT_COPYTORAM=n
CONFIG_CUSTOM_STACK=n