summaryrefslogtreecommitdiffstats
path: root/nuttx/configs/kwikstik-k40/include/board.h
diff options
context:
space:
mode:
Diffstat (limited to 'nuttx/configs/kwikstik-k40/include/board.h')
-rwxr-xr-xnuttx/configs/kwikstik-k40/include/board.h146
1 files changed, 104 insertions, 42 deletions
diff --git a/nuttx/configs/kwikstik-k40/include/board.h b/nuttx/configs/kwikstik-k40/include/board.h
index cfd32b0fb6..e709ea5aff 100755
--- a/nuttx/configs/kwikstik-k40/include/board.h
+++ b/nuttx/configs/kwikstik-k40/include/board.h
@@ -69,7 +69,7 @@
#define BOARD_VDIV 48 /* PLL VCO Divider (frequency multiplier) */
#define BOARD_PLLIN_FREQ (BOARD_EXTAL_FREQ / BOARD_PRDIV)
-#define BOARD_PLLOUT_FREQ (BOARD_EXTAL_FREQ * BOARD_VDIV)
+#define BOARD_PLLOUT_FREQ (BOARD_PLLIN_FREQ * BOARD_VDIV)
#define BOARD_MCG_FREQ BOARD_PLLOUT_FREQ
/* SIM CLKDIV1 dividers */
@@ -85,6 +85,7 @@
#define BOARD_FLASHCLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV4)
/* LED definitions ******************************************************************/
+/* The KwikStik-K40 board has no MCU driven, GPIO-based LEDs */
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
@@ -96,7 +97,7 @@
#define LED_PANIC 7
/* Button definitions ***************************************************************/
-
+/* The KwikStik-K40 board has no standard GPIO contact buttons */
/* Alternative pin resolution *******************************************************/
/* If there are alternative configurations for various pins in the
@@ -105,15 +106,107 @@
* configuration for the board by defining a pin configuration (with no suffix) that
* maps to the correct alternative.
*/
-#warning "Revisit: This only only here to get a clean compiliation"
-#define PIN_UART0_RX PIN_UART0_RX_1
-#define PIN_UART0_TX PIN_UART0_TX_1
-#define PIN_UART1_RX PIN_UART1_RX_1
-#define PIN_UART1_TX PIN_UART1_TX_1
-#define PIN_UART3_RX PIN_UART3_RX_1
-#define PIN_UART3_TX PIN_UART3_TX_1
-#define PIN_UART4_RX PIN_UART4_RX_1
-#define PIN_UART4_TX PIN_UART4_TX_1
+
+/* On-Board Connections
+ *
+ * ------------------- -------------------------- -------- -------------------
+ * FEATURE CONNECTION PORT/PIN PIN FUNCTION
+ * ------------------- -------------------------- -------- -------------------
+ * Audio Jack Output Audio Amp On PTE28 PTE28
+ * Audio Output DAC1_OUT DAC1_OUT
+ * Volume Up PTD10 PTD10
+ * Volume Down PTD11 PTD11
+ * Buzzer Audio Out PTA8 FTM1_CH0
+ * Microphone Microphone input PTA7 ADC0_SE10
+ * SD Card Slot SD Clock PTE2 SDHC0_DCLK
+ * SD Command PTE3 SDHC0_CMD
+ * SD Data0 PTD12 SDHC0_D4
+ * SD Data1 PTD13 SDHC0_D5
+ * SD Data2 PTD14 SDHC0_D6
+ * SD Data3 PTD15 SDHC0_D7
+ * SD Card Detect PTE27 PTE27
+ * SD Card On PTE6 PTE6
+ * Infrared Port IR Transmit PTE4 IR_TX
+ * IR Receive PTA13 CMP2_IN0
+ * Touch Pads E1 / Touch PTB0 TSI0_CH0
+ * E2 / Touch PTA4 TSI0_CH5
+ * E3 / Touch PTA24 PTA24
+ * E4 / Touch PTA25 PTA25
+ * E5 / Touch PTA26 PTA26
+ * E6 / Touch PTA27 PTA27
+ */
+
+#define PIN_FTM1_CH0 PIN_FTM1_CH0_1
+
+/* Connections via the General Purpose Tower Plug-in (TWRPI) Socket
+ * ------------------- -------------------------- -------- -------------------
+ * FEATURE CONNECTION PORT/PIN PIN FUNCTION
+ * ------------------- -------------------------- -------- -------------------
+ * General Purpose TWRPI AN0 (J8 Pin 8) ? ADC0_DP0/ADC1_DP3
+ * TWRPI Socket TWRPI AN1 (J8 Pin 9) ? ADC0_DM0/ADC1_DM3
+ * TWRPI AN2 (J8 Pin 12) ? ADC1_DP0/ADC0_DP3
+ * TWRPI ID0 (J8 Pin 17) ? ADC0_DP1
+ * TWRPI ID1 (J8 Pin 18) ? ADC0_DM1
+ * TWRPI I2C SCL (J9 Pin 3) PTC10 I2C1_SCL
+ * TWRPI I2C SDA (J9 Pin 4) PTC11 I2C1_SDA
+ * TWRPI SPI MISO (J9 Pin 9) PTB23 SPI2_SIN
+ * TWRPI SPI MOSI (J9 Pin 10) PTB22 SPI2_SOUT
+ * TWRPI SPI SS (J9 Pin 11) PTB20 SPI2_PCS0
+ * TWRPI SPI CLK (J9 Pin 12) PTB21 SPI2_SCK
+ * TWRPI GPIO0 (J9 Pin 15) PTC12 PTC12
+ * TWRPI GPIO1 (J9 Pin 16) PTB9 PTB9
+ * TWRPI GPIO2 (J9 Pin 17) PTB10 PTB10
+ * TWRPI GPIO3 (J9 Pin 18) PTC5 PTC5
+ * TWRPI GPIO4 (J9 Pin 19) PTA5 PTA5
+ */
+
+#define PIN_I2C1_SCL PIN_I2C1_SCL_1
+#define PIN_I2C1_SDA PIN_I2C1_SDA_1
+#define PIN_SPI2_SIN PIN_SPI2_SIN_1
+#define PIN_SPI2_SOUT PIN_SPI2_SOUT_1
+#define PIN_SPI2_PCS0 PIN_SPI2_PCS0_1
+#define PIN_SPI2_SCK PIN_SPI2_SCK_1
+
+/* Connections via the Tower Primary Connector Side A
+ * --- -------------------- --------------------------------
+ * PIN NAME USAGE
+ * --- -------------------- --------------------------------
+ * A9 GPIO9 / CTS1 PTE10/UART_CTS
+ * A43 RXD1 PTE9/UART_RX
+ * A44 TXD1 PTE8/UART_TX
+ * A63 RSTOUT_b PTA9/FTM1_CH1
+ */
+
+#define PIN_UART5_CTS PIN_UART5_CTS_2
+#define PIN_FTM1_CH1 PIN_FTM1_CH1_1
+
+/* Connections via the Tower Primary Connector Side B
+ * --- -------------------- --------------------------------
+ * PIN NAME USAGE
+ * --- -------------------- --------------------------------
+ * B21 GPIO1 / RTS1 PTE7/UART_RTS
+ * B37 PWM7 PTA8/FTM1_CH0
+ * B38 PWM6 PTA9/FTM1_CH1
+ * B41 CANRX0 PTE25/CAN1_RX
+ * B42 CANTX0 PTE24/CAN1_TX
+ * B44 SPI0_MISO PTA17/SPI0_SIN
+ * B45 SPI0_MOSI PTA16/SPI0_SOUT
+ * B46 SPI0_CS0_b PTA14/SPI0_PCS0
+ * B48 SPI0_CLK PTA15/SPI0_SCK
+ * B50 SCL1 PTE1/I2C1_SCL
+ * B51 SDA1 PTE0/I2C1_SDA
+ * B52 GPIO5 / SD_CARD_DET PTA16
+ */
+
+#define PIN_UART3_RTS PIN_UART3_RTS_3
+#define PIN_CAN1_RX PIN_CAN1_RX_2
+#define PIN_CAN1_TX PIN_CAN1_TX_2
+#define PIN_SPI0_SIN PIN_SPI0_SIN_1
+#define PIN_SPI0_SOUT PIN_SPI0_SOUT_1
+#define PIN_SPI0_SCK PIN_SPI0_SCK_1
+#define PIN_SPI0_PCS0 PIN_SPI0_PCS0_1
+#define PIN_I2C1_SCL PIN_I2C1_SCL_2
+#define PIN_I2C1_SDA PIN_I2C1_SDA_2
/************************************************************************************
* Public Data
@@ -144,37 +237,6 @@ extern "C" {
EXTERN void kinetis_boardinitialize(void);
-/************************************************************************************
- * Button support.
- *
- * Description:
- * up_buttoninit() must be called to initialize button resources. After
- * that, up_buttons() may be called to collect the current state of all
- * buttons or up_irqbutton() may be called to register button interrupt
- * handlers.
- *
- * After up_buttoninit() has been called, up_buttons() may be called to
- * collect the state of all buttons. up_buttons() returns an 8-bit bit set
- * with each bit associated with a button. See the BUTTON_*_BIT and JOYSTICK_*_BIT
- * definitions in board.h for the meaning of each bit.
- *
- * up_irqbutton() may be called to register an interrupt handler that will
- * be called when a button is depressed or released. The ID value is a
- * button enumeration value that uniquely identifies a button resource. See the
- * BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- * value. The previous interrupt handler address is returned (so that it may
- * restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
-
#undef EXTERN
#if defined(__cplusplus)
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-13 16:58:33 +0000