diff options
Diffstat (limited to 'apps/osmocomBB/osmocomBB/include/abb/twl3025.h')
| -rwxr-xr-x | apps/osmocomBB/osmocomBB/include/abb/twl3025.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/apps/osmocomBB/osmocomBB/include/abb/twl3025.h b/apps/osmocomBB/osmocomBB/include/abb/twl3025.h new file mode 100755 index 0000000000..3640644974 --- /dev/null +++ b/apps/osmocomBB/osmocomBB/include/abb/twl3025.h @@ -0,0 +1,186 @@ +#ifndef _TWL3025_H +#define _TWL3025_H + +#define PAGE(n) (n << 7) +enum twl3025_reg { + VRPCCFG = PAGE(1) | 30, + VRPCDEV = PAGE(0) | 30, + VRPCMSK = PAGE(1) | 31, + VRPCMSKABB = PAGE(1) | 29, + VRPCSTS = PAGE(0) | 31, + /* Monitoring ADC Registers */ + MADCTRL = PAGE(0) | 13, + MADCSTAT = PAGE(0) | 24, + VBATREG = PAGE(0) | 15, + VCHGREG = PAGE(0) | 16, + ICHGREG = PAGE(0) | 17, + VBKPREG = PAGE(0) | 18, + ADIN1REG = PAGE(0) | 19, + ADIN2REG = PAGE(0) | 20, + ADIN3REG = PAGE(0) | 21, + ADIN4REG = PAGE(0) | 22, + /* Clock Generator Registers */ + TOGBR1 = PAGE(0) | 4, + TOGBR2 = PAGE(0) | 5, + PWDNRG = PAGE(1) | 9, + TAPCTRL = PAGE(1) | 19, + TAPREG = PAGE(1) | 20, + /* Automatic Frequency Control (AFC) Registers */ + AUXAFC1 = PAGE(0) | 7, + AUXAFC2 = PAGE(0) | 8, + AFCCTLADD = PAGE(1) | 21, + AFCOUT = PAGE(1) | 22, + /* Automatic Power Control (APC) Registers */ + APCDEL1 = PAGE(0) | 2, + APCDEL2 = PAGE(1) | 26, + AUXAPC = PAGE(0) | 9, + APCRAM = PAGE(0) | 10, + APCOFF = PAGE(0) | 11, + APCOUT = PAGE(1) | 12, + /* Auxiliary DAC Control Register */ + AUXDAC = PAGE(0) | 12, + /* SimCard Control Register */ + VRPCSIM = PAGE(1) | 23, + /* LED Driver Register */ + AUXLED = PAGE(1) | 24, + /* Battery Charger Interface (BCI) Registers */ + CHGREG = PAGE(0) | 25, + BCICTL1 = PAGE(0) | 28, + BCICTL2 = PAGE(0) | 29, + BCICONF = PAGE(1) | 13, + /* Interrupt and Bus Control (IBIC) Registers */ + ITMASK = PAGE(0) | 28, + ITSTATREG = PAGE(0) | 27, /* both pages! */ + PAGEREG = PAGE(0) | 1, /* both pages! */ + /* Baseband Codec (BBC) Registers */ + BULIOFF = PAGE(1) | 2, + BULQOFF = PAGE(1) | 3, + BULIDAC = PAGE(1) | 5, + BULQDAC = PAGE(1) | 4, + BULGCAL = PAGE(1) | 14, + BULDATA1 = PAGE(0) | 3, /* 16 words */ + BBCTRL = PAGE(1) | 6, + /* Voiceband Codec (VBC) Registers */ + VBCTRL1 = PAGE(1) | 8, + VBCTRL2 = PAGE(1) | 11, + VBPOP = PAGE(1) | 10, + VBUCTRL = PAGE(1) | 7, + VBDCTRL = PAGE(0) | 6, +}; +#define BULDATA2 BULDATA1 + +/* available ADC inputs on IOTA */ +enum twl3025_dac_inputs {/* === Signal ============================= */ + MADC_VBAT=0, /* battery voltage / 4 */ + MADC_VCHG=1, /* charger voltage / 5 */ + MADC_ICHG=2, /* I-sense amp or CHGREG DAC output */ + MADC_VBKP=3, /* backup battery voltage / 4 */ + MADC_ADIN1=4, /* VADCID, sense battery type, not used */ + MADC_ADIN2=5, /* Temperature sensor in Battery */ + MADC_ADIN3=6, /* Mode_detect: sense 2.5mm jack insertion */ + MADC_ADIN4=7, /* RITA: TEMP_SEN */ + MADC_NUM_CHANNELS=8 +}; + +enum madcstat_reg_bits { /* monitoring ADC status register */ + ADCBUSY = 0x01 /* if set, a conversion is currently going on */ +}; + +/* BCICTL1 register bits */ +enum bcictl1_reg_bits { + MESBAT = 1<<0, /* connect resistive divider for bat voltage */ + DACNBUF = 1<<1, /* bypass DAC buffer */ + THSENS0 = 1<<3, /* thermal sensor bias current (ADIN2), bit 0 */ + THSENS1 = 1<<4, /* "" bit 1 */ + THSENS2 = 1<<5, /* "" bit 2 */ + THEN = 1<<6, /* enable thermal sensor bias current (ADIN1) */ + TYPEN = 1<<7 /* enable bias current for battery type reading */ +}; + +/* BCICTL1 register bits */ +enum bcictl2_reg_bits { + CHEN = 1<<0, /* enable charger */ + CHIV = 1<<1, /* 1=constant current, 0=constant voltage */ + CHBPASSPA=1<<2, /* full charging of the battery during pulse radio */ + CLIB = 1<<3, /* calibrate I-to-V amp (short input pins) */ + CHDISPA = 1<<4, /* disabel charging during pulse radio (???) */ + LEDC = 1<<5, /* enable LED during charge */ + CGAIN4 = 1<<6, /* if set, I-to-V amp gain is reduced from 10 to 4 */ + PREOFF = 1<<7 /* disable battery precharge */ +}; + +enum vrpcsts_reg_bits { + ONBSTS = 1<<0, /* button push switched on the mobile */ + ONRSTS = 1<<1, /* RPWON terminal switched on the mobile */ + ITWSTS = 1<<2, /* ITWAKEUP terminal switched on the mobile */ + CHGSTS = 1<<3, /* plugging in charger has switched on the mobile */ + ONREFLT= 1<<4, /* state of PWON terminal after debouncing */ + ONMRFLT= 1<<5, /* state of RPWON terminal after debouncing */ + CHGPRES= 1<<6 /* charger is connected */ +}; + +enum togbr2_bits { + TOGBR2_KEEPR = (1 << 0), /* Clear KEEPON bit */ + TOGBR2_KEEPS = (1 << 1), /* Set KEEPON bit */ + TOGBR2_ACTR = (1 << 2), /* Dectivate MCLK */ + TOGBR2_ACTS = (1 << 3), /* Activate MCLK */ + TOGBR2_IBUFPTR1 = (1 << 4), /* Initialize pointer of burst buffer 1 */ + TOGBR2_IBUFPTR2 = (1 << 5), /* Initialize pointer of burst buffer 2 */ + TOGBR2_IAPCPTR = (1 << 6), /* Initialize pointer of APC RAM */ +}; + +/* How a RAMP value is encoded */ +#define ABB_RAMP_VAL(up, down) ( ((down & 0x1F) << 5) | (up & 0x1F) ) + +enum twl3025_unit { + TWL3025_UNIT_AFC, + TWL3025_UNIT_MAD, + TWL3025_UNIT_ADA, + TWL3025_UNIT_VDL, + TWL3025_UNIT_VUL, +}; + +void twl3025_init(void); +void twl3025_reg_write(uint8_t reg, uint16_t data); +uint16_t twl3025_reg_read(uint8_t reg); + +void twl3025_power_off(void); + +void twl3025_clk13m(int enable); + +void twl3025_unit_enable(enum twl3025_unit unit, int on); + +enum twl3025_tsp_bits { + BULON = 0x80, + BULCAL = 0x40, + BULENA = 0x20, + BDLON = 0x10, + BDLCAL = 0x08, + BDLENA = 0x04, + STARTADC = 0x02, +}; + +extern const uint16_t twl3025_default_ramp[16]; + +/* Enqueue a TSP signal change via the TPU */ +void twl3025_tsp_write(uint8_t data); + +/* Enqueue a series of TSP commands in the TPU to (de)activate the downlink path */ +void twl3025_downlink(int on, int16_t at); + +/* Enqueue a series of TSP commands in the TPU to (de)activate the uplink path */ +void twl3025_uplink(int on, int16_t at); + +/* Update the AFC DAC value */ +void twl3025_afc_set(int16_t val); + +/* Get the AFC DAC value */ +int16_t twl3025_afc_get(void); + +/* Get the AFC DAC output value */ +uint8_t twl3025_afcout_get(void); + +/* Force a certain static AFC DAC output value */ +void twl3025_afcout_set(uint8_t val); + +#endif |