Make sure that the Z16F build still builds and runs

4 files changed, 416 insertions, 31 deletions

diff --git a/nuttx/configs/z16f2800100zcog/ostest/README.txt b/nuttx/configs/z16f2800100zcog/ostest/README.txt
index 214c3a9f1c..ad4a1b1cd1 100644
--- a/nuttx/configs/z16f2800100zcog/ostest/README.txt
+++ b/nuttx/configs/z16f2800100zcog/ostest/README.txt
@@ -1,12 +1,37 @@
 README.txt
 ^^^^^^^^^^
 
-ostest.zfpproj is a simple ZDS-II project that will allow you
-  to use the ZDS-II debugger.  Before using, copy the following
-  files from the toplevel directory:
+OSTEST Project
+--------------
+
+ostest.zfpproj is a simple ZDS II - ZNEO 5.0.1 project that will allow you
+  to use the ZDS-II debugger.  Before using, copy the following files from
+  the toplevel directory:
   
-  nuttx.hex, nuttx.map, nuttx.lod
+    nuttx.hex, nuttx.map, nuttx.lod
   
   to this directory as:
   
-  ostest.hex, ostest.map, ostest.lod
+    ostest.hex, ostest.map, ostest.lod
+
+ostest.zdzbak is a project file for an older ZDS-II 4.0 version (There is no
+  difference in the files other than for some versioning information at the
+  top).
+
+Loading and Executing Code
+--------------------------
+
+1. Copy the files to this directory as described above
+2. Connect the ZiLOG XTools USB debugger.
+3. Install the USB driver from the ZDS-II device_drivers directory
+4. Start ZDS-II and load the ostest.zfpproj project
+5. In the debug tab, connect to the debugger
+6. In the debug tab, load code, reset, and go
+
+Hmmm... it appears that the code does not run if started by a hardware reset.
+It runs only when started via the debugger.  What is up with that?
+
+Console Output
+--------------
+
+OS test results will be provided on the serial console at 57600 8N1 baud.
diff --git a/nuttx/configs/z16f2800100zcog/ostest/defconfig b/nuttx/configs/z16f2800100zcog/ostest/defconfig
index 73cc42e40e..7ad42d9f26 100644
--- a/nuttx/configs/z16f2800100zcog/ostest/defconfig
+++ b/nuttx/configs/z16f2800100zcog/ostest/defconfig
@@ -43,8 +43,9 @@ CONFIG_WINDOWS_CYGWIN=y
 # Debug Options
 #
 CONFIG_DEBUG=y
+# CONFIG_ARCH_HAVE_STACKCHECK is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
 # CONFIG_DEBUG_VERBOSE is not set
-# CONFIG_SYSLOG_ENABLE is not set
 
 #
 # Subsystem Debug Options
@@ -55,13 +56,17 @@ CONFIG_DEBUG=y
 # CONFIG_DEBUG_LIB is not set
 # CONFIG_DEBUG_BINFMT is not set
 # CONFIG_DEBUG_GRAPHICS is not set
+# CONFIG_DEBUG_IRQ is not set
 
 #
 # Driver Debug Options
 #
+# CONFIG_DEBUG_LEDS is not set
 # CONFIG_DEBUG_ANALOG is not set
-# CONFIG_DEBUG_DMA is not set
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_AUDIO is not set
 # CONFIG_DEBUG_SYMBOLS is not set
+# CONFIG_DEBUG_NOOPT is not set
 
 #
 # System Type
@@ -79,7 +84,6 @@ CONFIG_ARCH_Z16=y
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="z16"
 CONFIG_ARCH_CHIP="z16f"
-CONFIG_BOARD_LOOPSPERMSEC=1250
 
 #
 # Z16 Configuration Options
@@ -104,16 +108,29 @@ CONFIG_Z16F_UART1=y
 # Architecture Options
 #
 # CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
 # CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+# CONFIG_ARCH_HAVE_VFORK is not set
 CONFIG_ARCH_IRQPRIO=y
 # CONFIG_ARCH_STACKDUMP is not set
 CONFIG_ENDIAN_BIG=y
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
 
 #
 # Board Settings
 #
-CONFIG_RAM_START=
-CONFIG_RAM_SIZE=65536
+CONFIG_BOARD_LOOPSPERMSEC=1250
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+# CONFIG_ARCH_HAVE_INTERRUPTSTACK is not set
+# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
 
 #
 # Boot options
@@ -125,6 +142,12 @@ CONFIG_BOOT_RUNFROMFLASH=y
 # CONFIG_BOOT_COPYTORAM is not set
 
 #
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x0
+CONFIG_RAM_SIZE=65536
+
+#
 # Board Selection
 #
 CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y
@@ -144,10 +167,13 @@ CONFIG_ARCH_LEDS=y
 #
 # RTOS Features
 #
+# CONFIG_BOARD_INITIALIZE is not set
 CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
 CONFIG_RR_INTERVAL=200
 # CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2012
 CONFIG_START_MONTH=11
@@ -158,8 +184,8 @@ CONFIG_DEV_CONSOLE=y
 # CONFIG_FDCLONE_DISABLE is not set
 # CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-# CONFIG_SCHED_WORKQUEUE is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
 # CONFIG_SCHED_ATEXIT is not set
 # CONFIG_SCHED_ONEXIT is not set
 CONFIG_USER_ENTRYPOINT="ostest_main"
@@ -169,9 +195,15 @@ CONFIG_DISABLE_OS_API=y
 # CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_DISABLE_SIGNALS is not set
 # CONFIG_DISABLE_MQUEUE is not set
-# CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_DISABLE_ENVIRON is not set
-CONFIG_DISABLE_POLL=y
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
 # Sizes of configurable things (0 disables)
@@ -191,7 +223,6 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Stack and heap information
 #
-# CONFIG_CUSTOM_STACK is not set
 CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_USERMAIN_STACKSIZE=4096
 CONFIG_PTHREAD_STACK_MIN=256
@@ -200,17 +231,23 @@ CONFIG_PTHREAD_STACK_DEFAULT=4096
 #
 # Device Drivers
 #
+CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
 # CONFIG_LOOP is not set
 # CONFIG_RAMDISK is not set
 # CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
 # CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+# CONFIG_I2S is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
 # CONFIG_LCD is not set
@@ -226,8 +263,12 @@ CONFIG_DEV_LOWCONSOLE=y
 # CONFIG_16550_UART is not set
 CONFIG_ARCH_HAVE_UART0=y
 CONFIG_ARCH_HAVE_UART1=y
+
+#
+# USART Configuration
+#
 CONFIG_MCU_SERIAL=y
-CONFIG_STANDARD_SERIAL=y
+# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
 CONFIG_UART0_SERIAL_CONSOLE=y
 # CONFIG_UART1_SERIAL_CONSOLE is not set
 # CONFIG_NO_SERIAL_CONSOLE is not set
@@ -241,6 +282,8 @@ CONFIG_UART0_BAUD=57600
 CONFIG_UART0_BITS=8
 CONFIG_UART0_PARITY=0
 CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
 
 #
 # UART1 Configuration
@@ -251,6 +294,10 @@ CONFIG_UART1_BAUD=57600
 CONFIG_UART1_BITS=8
 CONFIG_UART1_PARITY=0
 CONFIG_UART1_2STOP=0
+# CONFIG_UART1_IFLOWCONTROL is not set
+# CONFIG_UART1_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
 # CONFIG_WIRELESS is not set
@@ -267,6 +314,8 @@ CONFIG_UART1_2STOP=0
 #
 # Networking Support
 #
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
 # CONFIG_NET is not set
 
 #
@@ -276,14 +325,20 @@ CONFIG_UART1_2STOP=0
 #
 # File system configuration
 #
-# CONFIG_FS_FAT is not set
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
 # CONFIG_FS_NXFFS is not set
 # CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
 
 #
 # System Logging
 #
+# CONFIG_SYSLOG_ENABLE is not set
 # CONFIG_SYSLOG is not set
 
 #
@@ -294,6 +349,7 @@ CONFIG_UART1_2STOP=0
 #
 # Memory Management
 #
+# CONFIG_MM_MULTIHEAP is not set
 # CONFIG_MM_SMALL is not set
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_HAVE_HEAP2=y
@@ -302,16 +358,28 @@ CONFIG_HEAP2_SIZE=0
 # CONFIG_GRAN is not set
 
 #
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
 # Binary Formats
 #
 # CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
 # CONFIG_NXFLAT is not set
 # CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
 # CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
 #
 # Library Routines
 #
+
+#
+# Standard C Library Options
+#
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
@@ -319,10 +387,14 @@ CONFIG_LIB_HOMEDIR="/"
 # CONFIG_LIBM is not set
 CONFIG_NOPRINTF_FIELDWIDTH=y
 # CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
 CONFIG_ARCH_LOWPUTC=y
@@ -331,8 +403,16 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 # CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
 # Basic CXX Support
 #
+# CONFIG_C99_BOOL8 is not set
 # CONFIG_HAVE_CXX is not set
 
 #
@@ -340,17 +420,15 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 #
 
 #
-# Named Applications
+# Built-In Applications
 #
-# CONFIG_BUILTIN is not set
 
 #
 # Examples
 #
 # CONFIG_EXAMPLES_BUTTONS is not set
 # CONFIG_EXAMPLES_CAN is not set
-# CONFIG_SYSTEM_CDCACM is not set
-# CONFIG_SYSTEM_COMPOSITE is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -359,12 +437,13 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 # CONFIG_EXAMPLES_HELLOXX is not set
 # CONFIG_EXAMPLES_JSON is not set
 # CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_IGMP is not set
 # CONFIG_EXAMPLES_LCDRW is not set
 # CONFIG_EXAMPLES_MM is not set
-# CONFIG_EXAMPLES_MOUNT is not set
 # CONFIG_EXAMPLES_MODBUS is not set
-# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
 # CONFIG_EXAMPLES_NSH is not set
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
@@ -384,11 +463,15 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_EXAMPLES_PASHELLO is not set
 # CONFIG_EXAMPLES_PIPE is not set
 # CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_QENCODER is not set
 # CONFIG_EXAMPLES_RGMP is not set
 # CONFIG_EXAMPLES_ROMFS is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_THTTPD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -396,14 +479,13 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UIP is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_SYSTEM_USBMSC is not set
 # CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
-# CONFIG_EXAMPLES_WLAN is not set
 
 #
-# Interpreters
+# Graphics Support
 #
+# CONFIG_TIFF is not set
 
 #
 # Interpreters
@@ -433,11 +515,7 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_NETUTILS_WEBCLIENT is not set
 
 #
-# ModBus
-#
-
-#
-# FreeModbus
+# FreeModBus
 #
 # CONFIG_MODBUS is not set
 
@@ -451,10 +529,23 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 #
 
 #
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
 # System NSH Add-Ons
 #
 
 #
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
 # Custom Free Memory Command
 #
 # CONFIG_SYSTEM_FREE is not set
@@ -469,6 +560,20 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_SYSTEM_INSTALL is not set
 
 #
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
 # readline()
 #
 # CONFIG_SYSTEM_READLINE is not set
@@ -492,3 +597,20 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # Sysinfo
 #
 # CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/z16f2800100zcog/ostest/ostest.zdsbak b/nuttx/configs/z16f2800100zcog/ostest/ostest.zdsbak
new file mode 100755
index 0000000000..ade3d73d42
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/ostest/ostest.zdsbak
@@ -0,0 +1,238 @@
+<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="c:4.11:07031901">

+<cpu>Z16F2811AL</cpu>

+

+<!-- file information -->

+<files>

+<file filter-key="flash">..\..\..\nuttx.hex</file>

+</files>

+

+<!-- configuration information -->

+<configurations>

+<configuration name="Debug" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild">Z16F2800100ZCOG</option>

+<option name="debugtool" type="string" change-action="none">USBSmartCable</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">true</option>

+<option name="sn" type="string" change-action="none">000000000000000000000000</option>

+<option name="snsize" type="integer" change-action="none">1</option>

+<option name="snstep" type="integer" change-action="none">000000000000000000000001</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">true</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\ostest</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+<configuration name="Release" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild"></option>

+<option name="debugtool" type="string" change-action="none">ZPAKII</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">false</option>

+<option name="sn" type="string" change-action="none">0</option>

+<option name="snsize" type="integer" change-action="none">0</option>

+<option name="snstep" type="integer" change-action="none">1</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">false</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\ostest</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+</configurations>

+

+<!-- watch information -->

+<watch-elements>

+<watch-element expression="0x801d1a" />

+</watch-elements>

+

+<!-- breakpoint information -->

+<breakpoints>

+</breakpoints>

+

+</project>
\ No newline at end of file
diff --git a/nuttx/configs/z16f2800100zcog/ostest/ostest.zfpproj b/nuttx/configs/z16f2800100zcog/ostest/ostest.zfpproj
index ade3d73d42..7d4f731f9b 100644
--- a/nuttx/configs/z16f2800100zcog/ostest/ostest.zfpproj
+++ b/nuttx/configs/z16f2800100zcog/ostest/ostest.zfpproj
@@ -1,4 +1,4 @@
-<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="c:4.11:07031901">

+<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="d:5.0.0:11071102" ZDSII="ZDS - ZNEO 5.0.1 (Build 11071201)">

 <cpu>Z16F2811AL</cpu>

 

 <!-- file information -->