diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-14 00:22:31 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-14 00:22:31 +0000 |
commit | 3b8a6dddff146b60cd09d1f3dd3b95cd8042ccd5 (patch) | |
tree | 66a5ff991fbd784101e2e833d83981c50aca837a /nuttx/configs/compal_e88/README.txt | |
parent | c39c92fb6b3803270215d5552acf6ac6d23a31f8 (diff) |
Calypso update from Denis Carkiki. Adds UWire driver and support for external memory in NuttX heap
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4733 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/compal_e88/README.txt')
-rwxr-xr-x | nuttx/configs/compal_e88/README.txt | 103 |
1 files changed, 52 insertions, 51 deletions
diff --git a/nuttx/configs/compal_e88/README.txt b/nuttx/configs/compal_e88/README.txt index 2d2839b61b..05f9431000 100755 --- a/nuttx/configs/compal_e88/README.txt +++ b/nuttx/configs/compal_e88/README.txt @@ -1,51 +1,52 @@ -compal_e88
-==========
-
-This directory contains the board support for compal e88 phones.
-
-This port is based on patches contributed by Denis Carikli for both the
-compal e99 and e88. At the time of initial check-in, the following phones
-were tested:
-
-* motorolla c155 (compal e99) with the compalram and highram configuration
-* motorolla W220 (compal e88)
-* The openmoko freerunner baseband(compal e88)
-
-The patches were made by Alan Carvalho de Assis and Denis Carikli using
-the Stefan Richter's patches that can be found here:
-
-http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting
-
-Osmocom-BB Dependencies and Sercomm
-===================================
-
-The build environment assumes that you have the osmocom-bb project
-directory at same level as the nuttx project:
-
- |- nuttx
- |- apps
- `- osmocom-bb
-
-If you attempt to build this configuration without osmocom-bb, you will
-get compilation errors in drivers/sercomm due to header files that are
-needed from the osmocom-bb directory.
-
-By default, NuttX will use sercomm (HDLC protocol) to communicate with the
-host system. Sercomm is the transport used by osmocom-bb that runs on top
-of serial. See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed
-the usage of nuttx with sercomm.
-
-Loading NuttX
-=============
-
-The osmocom-bb wiki describes how to load NuttX. See
-http://bb.osmocom.org/trac/wiki/nuttx-bb for detailed information.
-The way that nuttx is loaded depends on the configuration (highram/compalram)
-and phone:
-
-o compalram is for the ramloader(for phone having a bootloader on flash)
-o highram is for phones having the romloader(if the phone has a bootrom)
- or for loading in the ram trough a special loader(loaded first on ram
- by talking to the ramloader) when having a ramloader(which can only
- load 64k).
-
+compal_e88 +========== + +This directory contains the board support for compal e88 phones. + +This port is based on patches contributed by Denis Carikli for both the +compal e99 and e88. At the time of initial check-in, the following phones +were tested: + +* motorolla c155 (compal e99) with the compalram and highram configuration +* motorolla W220 (compal e88) +* The openmoko freerunner baseband(compal e88) + +The patches were made by Alan Carvalho de Assis and Denis Carikli using +the Stefan Richter's patches that can be found here: + +http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting + +Osmocom-BB Dependencies and Sercomm +=================================== + +The build environment assumes that you have the osmocom-bb project +directory at same level as the nuttx project: + + |- nuttx + |- apps + `- osmocom-bb + +If you attempt to build this configuration without osmocom-bb, and that +you added support for sercomm in your configuration(CONFIG_SERCOMM_CONSOLE=y) +you will get compilation errors in drivers/sercomm due to header files that +are needed from the osmocom-bb directory. + +By default, NuttX will not use sercomm (HDLC protocol) to communicate with +the host system. Sercomm is the transport used by osmocom-bb that runs on top +of serial. See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed +the usage of nuttx with sercomm. + +Loading NuttX +============= + +The osmocom-bb wiki describes how to load NuttX. See +http://bb.osmocom.org/trac/wiki/nuttx-bb for detailed information. +The way that nuttx is loaded depends on the configuration (highram/compalram) +and phone: + +o compalram is for the ramloader(for phone having a bootloader on flash) +o highram is for phones having the romloader(if the phone has a bootrom) + or for loading in the ram trough a special loader(loaded first on ram + by talking to the ramloader) when having a ramloader(which can only + load 64k). + |