Common ARM support

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@187 7fd9a85b-ad96-42d3-883c-3090e2eb8679

9 files changed, 2621 insertions, 0 deletions

diff --git a/nuttx/arch/arm/src/c5471/Make.defs b/nuttx/arch/arm/src/c5471/Make.defs
new file mode 100644
index 0000000000..54d3379386
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/Make.defs
@@ -0,0 +1,48 @@
+############################################################################
+# c5471/Make.defs
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+HEAD_ASRC	= up_nommuhead.S
+
+CMN_ASRCS	= up_saveusercontext.S up_fullcontextrestore.S
+CMN_CSRCS	= up_allocateheap.c up_assert.c up_blocktask.c up_copystate.c \
+		  up_createstack.c up_dataabort.c up_delay.c up_exit.c up_idle.c \
+		  up_initialize.c up_initialstate.c up_interruptcontext.c \
+		  up_prefetchabort.c up_releasepending.c up_releasestack.c \
+		  up_reprioritizertr.c up_schedulesigaction.c up_sigdeliver.c \
+		  up_syscall.c up_unblocktask.c up_undefinedinsn.c up_usestack.c
+
+CHIP_ASRCS	= c5471_lowputc.S c5471_vectors.S
+CHIP_CSRCS	= c5471_doirq.c c5471_irq.c c5471_serial.c c5471_timerisr.c \
+		  c5471_watchdog.c
diff --git a/nuttx/arch/arm/src/c5471/c5471_doirq.c b/nuttx/arch/arm/src/c5471/c5471_doirq.c
new file mode 100644
index 0000000000..19d898b4cf
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_doirq.c
@@ -0,0 +1,104 @@
+/************************************************************
+ * c5471/c5471_doirq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <assert.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+void c5471_doirq(int irq, uint32* regs)
+{
+  up_ledon(LED_INIRQ);
+#ifdef CONFIG_SUPPRESS_INTERRUPTS
+  PANIC(OSERR_ERREXCEPTION);
+#else
+  if ((unsigned)irq < NR_IRQS)
+    {
+       /* Current regs non-zero indicates that we are processing
+        * an interrupt; current_regs is also used to manage
+        * interrupt level context switches.
+        */
+
+       current_regs = regs;
+
+       /* Mask and acknowledge the interrupt */
+
+       up_maskack_irq(irq);
+
+       /* Deliver the IRQ */
+
+       irq_dispatch(irq, regs);
+
+       /* Indicate that we are no long in an interrupt handler */
+
+       current_regs = NULL;
+
+       /* Unmask the last interrupt (global interrupts are still
+        * disabled.
+        */
+
+       up_enable_irq(irq);
+    }
+  up_ledoff(LED_INIRQ);
+#endif
+}
diff --git a/nuttx/arch/arm/src/c5471/c5471_irq.c b/nuttx/arch/arm/src/c5471/c5471_irq.c
new file mode 100644
index 0000000000..a9ab7b1660
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_irq.c
@@ -0,0 +1,242 @@
+/************************************************************
+ * c5471/c5471_irq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define ILR_EDGESENSITIVE 0x00000020
+#define ILR_PRIORITY      0x0000001E
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+uint32 *current_regs;
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/* The value of _vflashstart is defined in ld.script.  It
+ * could be hard-coded because we know that correct IRAM
+ * area is 0xffc00000.
+ */
+
+extern int _svectors; /* Type does not matter */
+
+/* The C5471 has FLASH at the low end of memory.  The
+ * rrload bootloaer will catch all interrupts and re-vector
+ * them to vectors stored in IRAM.  The following table is
+ * used to initialize those vectors.
+ */
+
+static up_vector_t g_vectorinittab[] =
+{
+  (up_vector_t)NULL,
+  up_vectorundefinsn,
+  up_vectorswi,
+  up_vectorprefetch,
+  up_vectordata,
+  up_vectoraddrexcptn,
+  up_vectorirq,
+  up_vectorfiq
+};
+#define NVECTORS ((sizeof(g_vectorinittab)) / sizeof(up_vector_t))
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_ackirq
+ *
+ * Description:
+ *   Acknowlede the IRQ.Bit 0 of the Interrupt Control
+ *   Register ==  New IRQ agreement (NEW_IRQ_AGR). Reset IRQ
+ *   output. Clear source IRQ register. Enables a new IRQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackirq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_IRQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_ackfiq
+ *
+ * Description:
+ *   Acknowledge the FIQ.  Bit 1 of the Interrupt Control
+ *   Register ==  New FIQ agreement (NEW_FIQ_AGR). Reset FIQ
+ *   output. Clear source FIQ register. Enables a new FIQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackfiq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_FIQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000002, INT_CTRL_REG); /* write the NEW_FIQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_vectorinitialize
+ ************************************************************/
+
+static inline void up_vectorinitialize(void)
+{
+  up_vector_t *src  = g_vectorinittab;
+  up_vector_t *dest = (up_vector_t*)&_svectors;
+  int i;
+
+  for (i = 0; i < NVECTORS; i++)
+    {
+      *dest++ = *src++;
+    }
+}
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_irqinitialize
+ ************************************************************/
+
+void up_irqinitialize(void)
+{
+  /* Disable all interrupts. */
+
+  putreg32(0x0000ffff, MASK_IT_REG);
+
+  /* Clear any pending interrupts */
+
+  up_ackirq(0);
+  up_ackfiq(0);
+  putreg32(0x00000000, IT_REG);
+
+  /* Override hardware defaults */
+
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ2_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ4_REG);
+  putreg32(ILR_PRIORITY,                     ILR_IRQ6_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ15_REG);
+
+  /* Initialize hardware interrupt vectors */
+
+  up_vectorinitialize();
+  current_regs = NULL;
+
+  /* And finally, enable interrupts */
+
+#ifndef CONFIG_SUPPRESS_INTERRUPTS
+  irqrestore(SVC_MODE | PSR_F_BIT);
+#endif
+}
+
+/************************************************************
+ * Name: up_disable_irq
+ *
+ * Description:
+ *   Disable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_disable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg | (1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_enable_irq
+ *
+ * Description:
+ *   Enable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_enable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg & ~(1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_maskack_irq
+ *
+ * Description:
+ *   Mask the IRQ and acknowledge it
+ *
+ ************************************************************/
+
+void up_maskack_irq(int irq)
+{
+  uint32 reg = getreg32(INT_CTRL_REG);
+
+  /* Mask the interrupt */
+
+  reg = getreg32(MASK_IT_REG);
+  putreg32(reg | (1 << irq), MASK_IT_REG);
+
+  /* Set the NEW_IRQ_AGR bit.  This clears the IRQ src register
+   * enables generation of a new IRQ.
+   */
+
+  reg = getreg32(INT_CTRL_REG);
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}
diff --git a/nuttx/arch/arm/src/c5471/c5471_lowputc.S b/nuttx/arch/arm/src/c5471/c5471_lowputc.S
new file mode 100644
index 0000000000..78154fd8c1
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_lowputc.S
@@ -0,0 +1,127 @@
+/**************************************************************************
+ * c5471/c5471_lowputc.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_lowputc
+ **************************************************************************/
+
+/* This assembly language version has the advantage that it can does not
+ * require a C stack and uses only r0-r1.  Hence it can be used during
+ * early boot phases.
+ */
+
+	.text
+	.global	up_lowputc
+	.type	up_lowputc, function
+up_lowputc:
+	/* On entry, r0 holds the character to be printed */
+
+#ifdef CONFIG_SERIAL_IRDA_CONSOLE
+	ldr	r2, =UART_IRDA_BASE	/* r2=IRDA UART base */
+#else
+	ldr	r2, =UART_MODEM_BASE	/* r2=Modem UART base */
+#endif
+
+	/* Poll bit 0 of the UART_SSR register.  When the bit
+	 * is clear, the TX FIFO is no longer full
+	 */
+
+1:	ldr	r1, [r2, #UART_SSR_OFFS]
+	tst	r1, #UART_SSR_TXFULL
+	bne	1b
+
+	/* Send the character by writing it into the UART_THR
+	 * register.
+	 */
+
+	str     r0, [r2, #UART_THR_OFFS]
+
+	/* Wait for the tranmsit holding regiser (THR) to be
+	 * emptied. This is detemined when bit 6 of the LSR
+	 * is set.
+	 */
+
+2:	ldr     r1, [r2, #UART_LSR_OFFS]
+	tst     r1, #0x00000020
+	beq     2b
+
+	/* If the character that we just sent was a linefeed,
+	 * then send a carriage return as well.
+	 */
+
+	teq     r0, #'\n'
+	moveq   r0, #'\r'
+	beq     1b
+
+	/* And return */
+
+	mov     pc, lr
+
diff --git a/nuttx/arch/arm/src/c5471/c5471_serial.c b/nuttx/arch/arm/src/c5471/c5471_serial.c
new file mode 100644
index 0000000000..13197816be
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_serial.c
@@ -0,0 +1,811 @@
+/************************************************************
+ * c5471/c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471c5471_serial.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <semaphore.h>
+#include <string.h>
+#include <errno.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <nuttx/serial.h>
+#include <arch/serial.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define BASE_BAUD     115200
+
+#if defined(CONFIG_UART_IRDA_HWFLOWCONTROL) || defined(CONFIG_UART_MODEM_HWFLOWCONTROL)
+# define CONFIG_UART_HWFLOWCONTROL
+#endif
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+struct uart_regs_s
+{
+  uint32  ier;
+  uint32  lcr;
+  uint32  fcr;
+#ifdef CONFIG_UART_HWFLOWCONTROL
+  uint32  efr;
+  uint32  tcr;
+#endif
+};
+
+struct up_dev_s
+{
+  unsigned int         uartbase;	/* Base address of UART
+					 * registers */
+  unsigned int         baud_base;	/* Base baud for conversions */
+  unsigned int         baud;		/* Configured baud */
+  ubyte                xmit_fifo_size;	/* Size of transmit FIFO */
+  ubyte                irq;		/* IRQ associated with
+					 * this UART */
+  ubyte                parity;		/* 0=none, 1=odd, 2=even */
+  ubyte                bits;		/* Number of bits (7 or 8) */
+#ifdef CONFIG_UART_HWFLOWCONTROL
+  boolean              flowcontrol;	/* TRUE: Hardware flow control
+					 * is enabled. */
+#endif
+  boolean              stopbits2;	/* TRUE: Configure with 2
+					 * stop bits instead of 1 */
+  struct uart_regs_s   regs;		/* Shadow copy of readonly regs */
+};
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+static int     up_setup(struct uart_dev_s *dev);
+static void    up_shutdown(struct uart_dev_s *dev);
+static int     up_interrupt(int irq, void *context);
+static int     up_ioctl(struct file *filep, int cmd, unsigned long arg);
+static int     up_receive(struct uart_dev_s *dev, unsigned int *status);
+static void    up_rxint(struct uart_dev_s *dev, boolean enable);
+static boolean up_rxfifonotempty(struct uart_dev_s *dev);
+static void    up_send(struct uart_dev_s *dev, int ch);
+static void    up_txint(struct uart_dev_s *dev, boolean enable);
+static boolean up_txfifonotfull(struct uart_dev_s *dev);
+static boolean up_txfifoempty(struct uart_dev_s *dev);
+
+/************************************************************
+ * Private Variables
+ ************************************************************/
+
+struct uart_ops_s g_uart_ops =
+{
+  .setup          = up_setup,
+  .shutdown       = up_shutdown,
+  .handler        = up_interrupt,
+  .ioctl          = up_ioctl,
+  .receive        = up_receive,
+  .rxint          = up_rxint,
+  .rxfifonotempty = up_rxfifonotempty,
+  .send           = up_send,
+  .txint          = up_txint,
+  .txfifonotfull  = up_txfifonotfull,
+  .txfifoempty    = up_txfifoempty,
+};
+
+/* I/O buffers */
+
+static char g_irdarxbuffer[CONFIG_UART_IRDA_RXBUFSIZE];
+static char g_irdatxbuffer[CONFIG_UART_IRDA_TXBUFSIZE];
+static char g_modemrxbuffer[CONFIG_UART_MODEM_RXBUFSIZE];
+static char g_modemtxbuffer[CONFIG_UART_MODEM_TXBUFSIZE];
+
+/* This describes the state of the C5471 serial IRDA port. */
+
+static struct up_dev_s g_irdapriv =
+{
+  .xmit_fifo_size = UART_IRDA_XMIT_FIFO_SIZE,
+  .baud_base      = BASE_BAUD,
+  .uartbase       = UART_IRDA_BASE,
+  .baud           = CONFIG_UART_IRDA_BAUD,
+  .parity         = CONFIG_UART_IRDA_PARITY,
+  .bits           = CONFIG_UART_IRDA_BITS,
+#ifdef CONFIG_UART_IRDA_HWFLOWCONTROL
+  .flowcontrol    = TRUE,
+#endif
+  .stopbits2      = CONFIG_UART_IRDA_2STOP,
+};
+
+static uart_dev_t g_irdaport =
+{
+  .irq      = C5471_IRQ_UART_IRDA,
+  .recv     =
+  {
+    .size   = CONFIG_UART_IRDA_RXBUFSIZE,
+    .buffer = g_irdarxbuffer,
+  },
+  .xmit     =
+  {
+    .size   = CONFIG_UART_IRDA_TXBUFSIZE,
+    .buffer = g_irdatxbuffer,
+   },
+  .ops      = &g_uart_ops,
+  .priv     = &g_irdapriv,
+};
+
+/* This describes the state of the C5471 serial Modem port. */
+
+static struct up_dev_s g_modempriv =
+{
+  .xmit_fifo_size = UART_XMIT_FIFO_SIZE,
+  .baud_base      = BASE_BAUD,
+  .uartbase       = UART_MODEM_BASE,
+  .baud           = CONFIG_UART_MODEM_BAUD,
+  .parity         = CONFIG_UART_MODEM_PARITY,
+  .bits           = CONFIG_UART_MODEM_BITS,
+#ifdef CONFIG_UART_MODEM_HWFLOWCONTROL
+  .flowcontrol    = TRUE,
+#endif
+  .stopbits2      = CONFIG_UART_MODEM_2STOP,
+};
+
+static uart_dev_t g_modemport =
+{
+  .irq      = C5471_IRQ_UART,
+  .recv     =
+  {
+    .size   = CONFIG_UART_MODEM_RXBUFSIZE,
+    .buffer = g_modemrxbuffer,
+  },
+  .xmit     =
+  {
+    .size   = CONFIG_UART_MODEM_TXBUFSIZE,
+    .buffer = g_modemtxbuffer,
+  },
+  .ops      = &g_uart_ops,
+  .priv     = &g_modempriv,
+};
+
+/* Now, which one with be tty0/console and which tty1? */
+
+#ifdef CONFIG_SERIAL_IRDA_CONSOLE
+# define CONSOLE_DEV     g_irdaport
+# define TTYS0_DEV       g_irdaport
+# define TTYS1_DEV       g_modemport
+#else
+# define CONSOLE_DEV     g_modemport
+# define TTYS0_DEV       g_modemport
+# define TTYS1_DEV       g_irdaport
+#endif
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_inserial
+ ************************************************************/
+
+static inline uint32 up_inserial(struct up_dev_s *priv, uint32 offset)
+{
+  return getreg32(priv->uartbase + offset);
+}
+
+/************************************************************
+ * Name: up_serialout
+ ************************************************************/
+
+static inline void up_serialout(struct up_dev_s *priv, uint32 offset, uint32 value)
+{
+  putreg32(value, priv->uartbase + offset);
+}
+
+/************************************************************
+ * Name: up_disableuartint
+ ************************************************************/
+
+static inline void up_disableuartint(struct up_dev_s *priv, uint16 *ier)
+{
+  if (ier)
+    {
+      *ier = priv->regs.ier & UART_IER_INTMASK;
+    }
+  priv->regs.ier &= ~UART_IER_INTMASK;
+  up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+}
+
+/************************************************************
+ * Name: up_restoreuartint
+ ************************************************************/
+
+static inline void up_restoreuartint(struct up_dev_s *priv, uint16 ier)
+{
+  priv->regs.ier |= ier & (UART_IER_RECVINT|UART_IER_XMITINT);
+  up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+}
+
+/************************************************************
+ * Name: up_waittxfifonotfull
+ ************************************************************/
+
+static inline void up_waittxfifonotfull(struct up_dev_s *priv)
+{
+  int tmp;
+
+  for (tmp = 1000 ; tmp > 0 ; tmp--)
+    {
+      if ((up_inserial(priv, UART_SSR_OFFS) & UART_SSR_TXFULL) == 0)
+        {
+          break;
+        }
+    }
+}
+/************************************************************
+ * Name: up_disablebreaks
+ ************************************************************/
+
+static inline void up_disablebreaks(struct up_dev_s *priv)
+{
+  priv->regs.lcr &= ~UART_LCR_BOC;
+  up_serialout(priv, UART_LCR_OFFS, priv->regs.lcr);
+}
+
+/************************************************************
+ * Name: up_enablebreaks
+ ************************************************************/
+
+static inline void up_enablebreaks(struct up_dev_s *priv)
+{
+  priv->regs.lcr |= UART_LCR_BOC;
+  up_serialout(priv, UART_LCR_OFFS, priv->regs.lcr);
+}
+
+/************************************************************
+ * Name: up_setrate
+ ************************************************************/
+
+static inline void up_setrate(struct up_dev_s *priv, unsigned int rate)
+{
+  uint32 div_bit_rate;
+
+  switch (rate)
+    {
+    case 115200:
+      div_bit_rate = BAUD_115200;
+      break;
+    case 57600:
+      div_bit_rate = BAUD_57600;
+      break;
+    case 38400:
+      div_bit_rate = BAUD_38400;
+      break;
+    case 19200:
+      div_bit_rate = BAUD_19200;
+      break;
+    case 4800:
+      div_bit_rate = BAUD_4800;
+      break;
+    case 2400:
+      div_bit_rate = BAUD_2400;
+      break;
+    case 1200:
+      div_bit_rate = BAUD_1200;
+      break;
+    case 9600:
+    default:
+      div_bit_rate = BAUD_9600;
+      break;
+    }
+
+  up_serialout(priv, UART_DIV_BIT_RATE_OFFS, div_bit_rate);
+}
+
+/************************************************************
+ * Name: up_setup
+ *
+ * Description:
+ *   Configure the UART baud, bits, parity, fifos, etc. This
+ *   method is called the first time that the serial port is
+ *   opened.
+ *
+ ************************************************************/
+
+static int up_setup(struct uart_dev_s *dev)
+{
+#ifdef CONFIG_SUPPRESS_UART_CONFIG
+  struct up_dev_s *priv = dev->priv;
+  unsigned int cval;
+
+  if (priv->bits == 7)
+    {
+      cval = UART_LCR_7BITS;
+    }
+  else
+    {
+      cval = UART_LCR_8BITS;
+    }
+
+  if (priv->stopbits2)
+    {
+      cval |= UART_LCR_2STOP;
+    }
+
+  if (priv->parity == 1)   /* Odd parity */
+    {
+      cval |= (UART_LCR_PAREN|UART_LCR_PARODD);
+    }
+  else if (priv->parity == 2)  /* Even parity */
+    {
+      cval |= (UART_LCR_PAREN|UART_LCR_PAREVEN);
+    }
+
+  /* Both the IrDA and MODEM UARTs support RESET and UART mode. */
+
+  up_serialout(priv, UART_MDR_OFFS, MDR_RESET_MODE);
+  up_delay(5);
+  up_serialout(priv, UART_MDR_OFFS, MDR_UART_MODE);
+  up_delay(5);
+
+  priv->regs.ier = up_inserial(priv, UART_IER_OFFS);
+  priv->regs.lcr = up_inserial(priv, UART_LCR_OFFS);
+#ifdef CONFIG_UART_HWFLOWCONTROL
+  if (priv->flowcontrol)
+    {
+      priv->regs.efr = up_inserial(priv, UART_EFR_OFFS);
+      priv->regs.tcr = up_inserial(priv, UART_TCR_OFFS);
+    }
+#endif
+
+  up_disableuartint(priv, NULL);
+
+  up_serialout(priv, UART_EFR_OFFS,  0x0010);           /* Enable fifo control */
+  up_serialout(priv, UART_TFCR_OFFS, 0);                /* Reset to 0 */
+  up_serialout(priv, UART_RFCR_OFFS, UART_FCR_RX_CLR);  /* Clear RX fifo */
+  up_serialout(priv, UART_TFCR_OFFS, UART_FCR_TX_CLR);  /* Clear TX fifo */
+  up_serialout(priv, UART_TFCR_OFFS, UART_FCR_FIFO_EN); /* Enable RX/TX fifos */
+
+  up_disablebreaks(priv);
+
+  priv->regs.fcr = (priv->regs.fcr & 0xffffffcf) | (val & 0x30);
+  up_serialout(priv, UART_RFCR_OFFS, priv->regs.fcr);
+
+  priv->regs.fcr = (priv->regs.fcr & 0xffffff3f) | (val & 0xc0);
+  up_serialout(priv, UART_RFCR_OFFS, priv->regs.fcr);
+
+  up_setrate(priv, priv->baud);
+
+  priv->regs.lcr &= 0xffffffe0;      /* clear original field, and... */
+  priv->regs.lcr |= (uint32)mode;    /* Set new bits in that field. */
+  up_serialout(priv, UART_LCR_OFFS, priv->regs.lcr);
+
+#ifdef CONFIG_UART_HWFLOWCONTROL
+  if (priv->flowcontrol)
+    {
+      /* Set the FIFO level triggers for flow control
+       * Halt = 48 bytes, resume = 12 bytes
+       */
+
+      priv->regs.tcr = (priv->regs.tcr & 0xffffff00) | 0x0000003c;
+      up_serialout(priv, UART_TCR_OFFS, priv->regs.tcr);
+
+      /* Enable RTS/CTS flow control */
+
+      priv->regs.efr |= 0x000000c0;
+      up_serialout(priv, UART_EFR_OFFS, priv->regs.efr);
+    }
+  else
+    {
+      /* Disable RTS/CTS flow control */
+
+      priv->regs.efr &= 0xffffff3f;
+      up_serialout(priv, UART_EFR_OFFS, priv->regs.efr);
+    }
+#endif
+#endif
+  return OK;
+}
+
+/************************************************************
+ * Name: up_shutdown
+ *
+ * Description:
+ *   Disable the UART.  This method is called when the serial port is closed
+ *
+ ************************************************************/
+
+static void up_shutdown(struct uart_dev_s *dev)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)CONSOLE_DEV.priv;
+  up_disableuartint(priv, NULL);
+}
+
+/************************************************************
+ * Name: up_interrupt
+ *
+ * Description:
+ *   This is the UART interrupt handler.  It will be invoked
+ *   when an interrupt received on the 'irq'  It should call
+ *   uart_transmitchars or uart_receivechar to perform the
+ *   appropriate data transfers.  The interrupt handling logic\
+ *   must be able to map the 'irq' number into the approprite
+ *   uart_dev_s structure in order to call these functions.
+ *
+ ************************************************************/
+
+static int up_interrupt(int irq, void *context)
+{
+  struct uart_dev_s *dev = NULL;
+  struct up_dev_s   *priv;
+  volatile uint32    cause;
+
+  if (g_irdaport.irq == irq)
+    {
+      dev = &g_irdaport;
+    }
+  else if (g_modemport.irq == irq)
+    {
+      dev = &g_modemport;
+    }
+  else
+    {
+      PANIC(OSERR_INTERNAL);
+    }
+  priv = (struct up_dev_s*)dev->priv;
+
+  cause = up_inserial(priv, UART_ISR_OFFS) & 0x0000003f;
+
+  if ((cause & 0x0000000c) == 0x0000000c)
+    {
+      uint32 ier_val = 0;
+
+      /* Is this an interrupt from the IrDA UART? */
+
+      if (irq == C5471_IRQ_UART_IRDA)
+         {
+           /* Save the currently enabled IrDA UART interrupts
+            * so that we can restore the IrDA interrupt state
+            * below.
+            */
+
+           ier_val = up_inserial(priv, UART_IER_OFFS);
+
+           /* Then disable all IrDA UART interrupts */
+
+           up_serialout(priv, UART_IER_OFFS, 0);
+         }
+
+      /* Receive characters from the RX fifo */
+
+      uart_recvchars(dev);
+
+      /* read UART_RHR to clear int condition
+       * toss = up_inserialchar(priv,&status);
+       */
+
+      /* Is this an interrupt from the IrDA UART? */
+
+      if (irq == C5471_IRQ_UART_IRDA)
+         {
+           /* Restore the IrDA UART interrupt enables */
+
+           up_serialout(priv, UART_IER_OFFS, ier_val);
+         }
+    }
+  else if ((cause & 0x0000000c) == 0x00000004)
+    {
+      uart_recvchars(dev);
+    }
+
+  if ((cause & 0x00000002) != 0)
+    {
+      uart_xmitchars(dev);
+    }
+
+  return OK;
+}
+
+/************************************************************
+ * Name: up_ioctl
+ *
+ * Description:
+ *   All ioctl calls will be routed through this method
+ *
+ ************************************************************/
+
+static int up_ioctl(struct file *filep, int cmd, unsigned long arg)
+{
+  struct inode      *inode = filep->f_inode;
+  struct uart_dev_s *dev   = inode->i_private;
+  struct up_dev_s   *priv  = (struct up_dev_s*)dev->priv;
+  int                ret    = OK;
+
+  switch (cmd)
+    {
+    case TIOCSERGSTRUCT:
+      {
+         struct up_dev_s *user = (struct up_dev_s*)arg;
+         if (!user)
+           {
+             *get_errno_ptr() = EINVAL;
+             ret = ERROR;
+           }
+         else
+           {
+             memcpy(user, dev, sizeof(struct up_dev_s));
+           }
+       }
+       break;
+
+    case TIOCSBRK:  /* BSD compatibility: Turn break on, unconditionally */
+      {
+        irqstate_t flags = irqsave();
+        up_enablebreaks(priv);
+        irqrestore(flags);
+      }
+      break;
+
+    case TIOCCBRK:  /* BSD compatibility: Turn break off, unconditionally */
+      {
+        irqstate_t flags;
+        flags = irqsave();
+        up_disablebreaks(priv);
+        irqrestore(flags);
+      }
+      break;
+
+    default:
+      *get_errno_ptr() = ENOTTY;
+      ret = ERROR;
+      break;
+    }
+
+  return ret;
+}
+
+/************************************************************
+ * Name: up_receive
+ *
+ * Description:
+ * Called (usually) from the interrupt level to receive one character from
+ * the UART.  Error bits associated with the receipt are provided in the
+ * the return 'status'.
+ *
+ ************************************************************/
+
+static int up_receive(struct uart_dev_s *dev, unsigned int *status)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  uint32 rhr;
+  uint32 lsr;
+
+  /* Construct a 16bit status word that uses the high byte to
+   * hold the status bits associated with framing,parity,break
+   * and a low byte that holds error bits of LSR for
+   * conditions such as overflow, etc.
+   */
+
+  rhr = up_inserial(priv, UART_RHR_OFFS);
+  lsr = up_inserial(priv, UART_LSR_OFFS);
+
+  *status = (unsigned int)((rhr & 0x0000ff00) | (lsr & 0x000000ff));
+
+  return rhr & 0x000000ff;
+}
+
+/************************************************************
+ * Name: up_rxint
+ *
+ * Description:
+ *   Call to enable or disable RX interrupts
+ *
+ ************************************************************/
+
+static void up_rxint(struct uart_dev_s *dev, boolean enable)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  if (enable)
+    {
+#ifndef CONFIG_SUPPRESS_SERIAL_INTS
+      priv->regs.ier |= UART_IER_RECVINT;
+      up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+#endif
+    }
+  else
+    {
+      priv->regs.ier &= ~UART_IER_RECVINT;
+      up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+    }
+}
+
+/************************************************************
+ * Name: up_rxfifonotempty
+ *
+ * Description:
+ *   Return TRUE if the receive fifo is not empty
+ *
+ ************************************************************/
+
+static boolean up_rxfifonotempty(struct uart_dev_s *dev)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  return up_inserial(priv, UART_LSR_OFFS) & UART_RX_FIFO_NOEMPTY;
+}
+
+/************************************************************
+ * Name: up_send
+ *
+ * Description:
+ *   This method will send one byte on the UART
+ *
+ ************************************************************/
+
+static void up_send(struct uart_dev_s *dev, int ch)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  up_serialout(priv, UART_THR_OFFS, (ubyte)ch);
+}
+
+/************************************************************
+ * Name: up_txint
+ *
+ * Description:
+ *   Call to enable or disable TX interrupts
+ *
+ ************************************************************/
+
+static void up_txint(struct uart_dev_s *dev, boolean enable)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  if (enable)
+    {
+#ifndef CONFIG_SUPPRESS_SERIAL_INTS
+      priv->regs.ier |= UART_IER_XMITINT;
+      up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+#endif
+    }
+  else
+    {
+      priv->regs.ier &= ~UART_IER_XMITINT;
+      up_serialout(priv, UART_IER_OFFS, priv->regs.ier);
+    }
+}
+
+/************************************************************
+ * Name: up_txfifonotfull
+ *
+ * Description:
+ *   Return TRUE if the tranmsit fifo is not full
+ *
+ ************************************************************/
+
+static boolean up_txfifonotfull(struct uart_dev_s *dev)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  return (up_inserial(priv, UART_SSR_OFFS) & UART_SSR_TXFULL) == 0;
+}
+
+/************************************************************
+ * Name: up_txfifoempty
+ *
+ * Description:
+ *   Return TRUE if the transmit fifo is empty
+ *
+ ************************************************************/
+
+static boolean up_txfifoempty(struct uart_dev_s *dev)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)dev->priv;
+  return (up_inserial(priv, UART_LSR_OFFS) & UART_LSR_TREF) != 0;
+}
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_serialinit
+ *
+ * Description:
+ *   Performs the low level UART initialization early in 
+ *   debug so that the serial console will be available
+ *   during bootup.  This must be called before up_serialinit.
+ *
+ ************************************************************/
+
+void up_earlyserialinit(void)
+{
+  up_disableuartint(TTYS0_DEV.priv, NULL);
+  up_disableuartint(TTYS1_DEV.priv, NULL);
+
+  CONSOLE_DEV.isconsole = TRUE;
+  up_setup(&CONSOLE_DEV);
+}
+
+/************************************************************
+ * Name: up_serialinit
+ *
+ * Description:
+ *   Register serial console and serial ports.  This assumes
+ *   that up_earlyserialinit was called previously.
+ *
+ ************************************************************/
+
+void up_serialinit(void)
+{
+  (void)uart_register("/dev/console", &CONSOLE_DEV);
+  (void)uart_register("/dev/ttyS0", &TTYS0_DEV);
+  (void)uart_register("/dev/ttyS1", &TTYS1_DEV);
+}
+
+/************************************************************
+ * Name: up_putc
+ *
+ * Description:
+ *   Provide priority, low-level access to support OS debug
+ *   writes
+ *
+ ************************************************************/
+
+int up_putc(int ch)
+{
+  struct up_dev_s *priv = (struct up_dev_s*)CONSOLE_DEV.priv;
+  uint16  ier;
+
+  up_disableuartint(priv, &ier);
+  up_waittxfifonotfull(priv);
+  up_serialout(priv, UART_THR_OFFS, (ubyte)ch);
+
+  /* Check for LF */
+
+  if (ch == '\n')
+    {
+      /* Add CR */
+
+      up_waittxfifonotfull(priv);
+      up_serialout(priv, UART_THR_OFFS, '\r');
+    }
+
+  up_waittxfifonotfull(priv);
+  up_restoreuartint(priv, ier);
+  return ch;
+}
+
diff --git a/nuttx/arch/arm/src/c5471/c5471_timerisr.c b/nuttx/arch/arm/src/c5471/c5471_timerisr.c
new file mode 100644
index 0000000000..e37043173e
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_timerisr.c
@@ -0,0 +1,125 @@
+/************************************************************
+ * c5471/c5471_timerisr.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "clock_internal.h"
+#include "up_internal.h"
+#include "up_arch.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* We want the general purpose timer running at the rate
+ * MSEC_PER_TICK. The C5471 clock is 47.5MHz and we're using
+ * a timer PTV value of 3 (3 == divide incoming frequency by
+ * 16) which then yields a 16 bitCLKS_PER_INT value
+ * of 29687.
+ *
+ *   47500000 / 16 = 2968750 clocks/sec
+ *   2968750 / 100 = 29687   clocks/ 100Hz interrupt
+ *
+ */
+
+#define CLKS_PER_INT       29687
+#define CLKS_PER_INT_SHIFT 5
+#define AR                 0x00000010
+#define ST                 0x00000008
+#define PTV                0x00000003
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Function:  up_timerisr
+ *
+ * Description:
+ *   The timer ISR will perform a variety of services for
+ *   various portions of the systems.
+ *
+ ************************************************************/
+
+int up_timerisr(int irq, uint32 *regs)
+{
+   /* Process timer interrupt */
+
+   sched_process_timer();
+   return 0;
+}
+
+/************************************************************
+ * Function:  up_timerinit
+ *
+ * Description:
+ *   This function is called during start-up to initialize
+ *   the timer interrupt.
+ *
+ ************************************************************/
+
+void up_timerinit(void)
+{
+  uint32 val;
+
+  up_disable_irq(C5471_IRQ_SYSTIMER);
+
+  /* Start the general purpose timer running in auto-reload mode
+   * so that an interrupt is generated at the rate MSEC_PER_TICK.
+   */
+
+  val = ((CLKS_PER_INT-1) << CLKS_PER_INT_SHIFT) | AR | ST | PTV;
+  putreg32(val, C5471_TIMER2_CTRL);
+
+  /* Attach and enable the timer interrupt */
+
+  irq_attach(C5471_IRQ_SYSTIMER, (xcpt_t)up_timerisr);
+  up_enable_irq(C5471_IRQ_SYSTIMER);
+}
+
diff --git a/nuttx/arch/arm/src/c5471/c5471_vectors.S b/nuttx/arch/arm/src/c5471/c5471_vectors.S
new file mode 100644
index 0000000000..328485e171
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_vectors.S
@@ -0,0 +1,449 @@
+/********************************************************************
+ * c5471/c5471_vectors.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+/********************************************************************
+ * Global Data
+ ********************************************************************/
+
+	.data
+g_irqtmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_undeftmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_aborttmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/********************************************************************
+ * Private Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Public Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Name: up_vectorirq
+ *
+ * Description:
+ *   Interrupt excetpion. Entered in IRQ mode with spsr = SVC
+ *   CPSR, lr = SVC PC
+ ********************************************************************/
+
+	.globl	up_vectorirq
+	.type	up_vectorirq, %function
+up_vectorirq:
+	/* On entry, we are in IRQ mode.  We are free to use
+	 * the IRQ mode r13 and r14.
+         *
+	 */
+
+	ldr	r13, .Lirqtmp
+	sub	lr, lr, #4
+	str	lr, [r13]			@ save lr_IRQ
+	mrs	lr, spsr
+	str	lr, [r13, #4]			@ save spsr_IRQ
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lirqtmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Now decode the interrupt */
+
+#if 0
+	ldr	lr, =SRC_IRQ_BIN_REG	/* Fetch encoded IRQ */
+	ldr	r0, [lr]
+	and	r0, r0, #0x0f		/* Valid range is 0..15 */
+
+	/* Problems here... cannot read SRC_IRQ_BIN_REQ (and/or
+	 * SRC_IRQ_REQ because this will clear edge triggered
+	 * interrupts.  Plus, no way to validate spurious
+	 * interrupt.
+	 */
+#else
+	ldr	r6, =SRC_IRQ_REG
+	ldr     r6, [r6]		/* Get source IRQ reg */
+	mov     r0, #0			/* Assume IRQ0_IRQ set */
+.Lmorebits:
+	tst     r6, #1			/* Is IRQ set? */
+	bne     .Lhaveirq		/* Yes... we have the IRQ */
+	add     r0, r0, #1		/* Setup next IRQ */
+	mov     r6, r6, lsr #1		/* Shift right one */
+	cmp     r0, #16			/* Only 16 valid bits */
+	bcc     .Lmorebits		/* Keep until we have looked
+					 * at all bits */
+	b	.Lnoirqset		/* If we get here, there is
+					 * no pending interrupt */
+.Lhaveirq:
+#endif
+	/* Then call the IRQ handler with interrupt disabled. */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r1, sp			/* Get r1=xcp */
+	bl	c5471_doirq		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+.Lnoirqset:
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lirqtmp:
+	.word	g_irqtmp
+
+	.align	5
+
+/********************************************************************
+ * Function: up_vectorswi
+ * 
+ * Description:
+ *   SWI interrupt. We enter the SWI in SVC mode
+ ********************************************************************/
+
+	.globl	up_vectorswi
+	.type	up_vectorswi, %function
+up_vectorswi:
+
+	/* The c547x rrload bootloader intemediates all
+	 * interrupts.  For the* case of the SWI, it mucked
+	 * with the stack to create some temporary registers.
+	 * We'll have to recover from this mucking here.
+	 */
+
+	ldr	r14, [sp,#-0x4]		/* rrload workaround */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp), r14(lr), r15(pc)
+	 * and CPSR in r1-r4 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14			/* R14 is altered on return from SWI */
+	mov	r3, r14			/* Save r14 as the PC as well */
+	mrs	r4, spsr		/* Get the saved CPSR */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the SWI handler with interrupt disabled.
+	 * void up_syscall(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_syscall		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectordata
+ *
+ * Description:
+ *   Data abort Exception dispatcher. Give control to data
+ *   abort handler.  This function is entered in ABORT mode
+ *   with spsr = SVC CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectordata
+	.type	up_vectordata, %function
+up_vectordata:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Ldaborttmp	/* Points to temp storage */
+	sub	lr, lr, #8		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Ldaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the data abort handler with interrupt disabled.
+	 * void up_dataabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_dataabort		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Ldaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorprefetch
+ *
+ * Description:
+ *    Prefetch abort exception.  Entered in ABT mode with
+ *    spsr = SVC CPSR, lr = SVC PC
+ ********************************************************************/
+	
+	.globl	up_vectorprefetch
+	.type	up_vectorprefetch, %function
+up_vectorprefetch:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lpaborttmp	/* Points to temp storage */
+	sub	lr, lr, #4		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lpaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the prefetch abort handler with interrupt disabled.
+	 * void up_prefetchabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_prefetchabort	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lpaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorundefinsn
+ *
+ * Description:
+ *   Undefined instruction entry exception.  Entered in
+ *   UND mode, spsr = SVC  CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectorundefinsn
+	.type	up_vectorundefinsn, %function
+up_vectorundefinsn:
+	/* On entry we are free to use the UND mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lundeftmp		/* Points to temp storage */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lundeftmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the undef insn handler with interrupt disabled.
+	 * void up_undefinedinsn(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_undefinedinsn	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lundeftmp:
+	.word	g_undeftmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorfiq
+ *
+ * Description:
+ *   Shouldn't happen
+ ********************************************************************/
+
+	.globl	up_vectorfiq
+	.type	up_vectorfiq, %function
+up_vectorfiq:
+	subs	pc, lr, #4
+
+/********************************************************************
+ *  Name: up_vectoraddrexcption
+ *
+ * Description:
+ *   Shouldn't happen
+ *
+ ********************************************************************/
+
+	.globl	up_vectoraddrexcptn
+	.type	up_vectoraddrexcptn, %function
+up_vectoraddrexcptn:
+	b	up_vectoraddrexcptn
+	.end
diff --git a/nuttx/arch/arm/src/c5471/c5471_watchdog.c b/nuttx/arch/arm/src/c5471/c5471_watchdog.c
new file mode 100644
index 0000000000..04b390a5c8
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/c5471_watchdog.c
@@ -0,0 +1,392 @@
+/**************************************************************************
+ * c5471/c5471_watchdog.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+#include <nuttx/fs.h>
+#include <nuttx/irq.h>
+#include <arch/watchdog.h>
+#include "up_arch.h"
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+
+#undef CONFIG_SOFTWARE_TEST
+#undef CONFIG_SOFTWARE_REBOOT
+#undef CONFIG_WATCHDOG_STRICT
+
+#define MAX_WDT_USEC           353200
+#define MAX_PRESCALER          256
+#define C5471_TIMER_STOP       0
+
+#define C5471_TIMER_PRESCALER  0x07          /* Bits 0-2: Prescale value */
+#define C5471_TIMER_STARTBIT   (1 << 3)      /* Bit 3: Start timer bit */
+#define C5471_TIMER_AUTORELOAD (1 << 4)      /* Bit 4: Auto-reload timer */
+#define C5471_TIMER_LOADTIM    (0xffff << 5) /* Bits 20-5: Load timer value */
+#define C5471_TIMER_MODE       (1 << 21)     /* Bit 21: Timer mode */
+#define C5471_DISABLE_VALUE1   (0xf5 << 22)  /* Bits 29-22: WD disable */
+#define C5471_DISABLE_VALUE2   (0xa0 << 22)
+
+#define CLOCK_KHZ              47500
+#define CLOCK_MHZx2            95
+
+/* Macros to manage access to to watchdog timer macros */
+
+#define c5471_wdt_cntl  (*(volatile uint32*)C5471_TIMER0_CTRL)
+#define c5471_wdt_count (*(volatile uint32*)C5471_TIMER0_CNT)
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/* Local implementation of timer interface */
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale);
+
+static int     wdt_setusec(uint32 usec);
+static int     wdt_interrupt(int irq, void *context);
+
+static int     wdt_open(struct file *filep);
+static int     wdt_close(struct file *filep);
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen);
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen);
+static int     wdt_ioctl(struct file *filep, int cmd, uint32 arg);
+
+/**************************************************************************
+ * Private Data
+ **************************************************************************/
+
+static boolean g_wdtopen;
+
+struct file_operations g_wdtops =
+{
+  .open  = wdt_open,
+  .close = wdt_close,
+  .read  = wdt_read,
+  .write = wdt_write,
+  .ioctl = wdt_ioctl,
+};
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_prescaletoptv
+ **************************************************************************/
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale)
+{
+  unsigned int ptv = 0;
+
+  if (prescale > 255)
+    {
+      ptv = 7;
+    }
+  else
+    {
+      unsigned int value = prescale >> 1;
+
+      /* 0: 0-2
+       * 1: 3-4
+       * 2: 5-8
+       * 3: 9-16
+       * 4: 17-32
+       * 5: 33-64
+       * 6: 65-128
+       * 7: 129-
+       */
+
+      while (value > 1)
+        {
+          value >>= 1;
+          ptv++;
+        }
+    }
+
+  dbg("prescale=%d -> ptv=%d\n", prescale, ptv);
+  return ptv;
+}
+
+/**************************************************************************
+ * Name: wdt_setusec
+ **************************************************************************/
+
+static int wdt_setusec(uint32 usec)
+{
+  /* prescaler: clock / prescaler = #clock ticks per counter in ptv
+   * divisor:   #counts until the interrupt comes.
+   */
+
+  uint32 prescaler = MAX_PRESCALER;
+  uint32 divisor   = 1;
+  uint32 mode;
+
+  dbg("usec=%d\n", usec);
+
+  /* Calculate a value of prescaler and divisor that will be able
+   * to count to the usec.  It may not be exact or the best
+   * possible set, but it's a quick and simple algorithm.
+   *
+   *    divisor max = 0x10000
+   *    prescaler max = MAX_PRESCALER
+   */
+
+  do
+    {
+      divisor = (CLOCK_MHZx2 * usec) / (prescaler * 2);
+      dbg("divisor=0x%x prescaler=0x%x\n", divisor, prescaler);
+
+      if (divisor >= 0x10000)
+        {
+          if (prescaler == MAX_PRESCALER)
+            { 
+              /* This is the max possible ~2.5 seconds. */
+
+              dbg("prescaler=0x%x too big!\n", prescaler);
+              return ERROR;
+            }
+
+          prescaler <<= 1;
+          if (prescaler > MAX_PRESCALER)
+            {
+              prescaler = MAX_PRESCALER;
+            }
+        }
+    }
+  while (divisor >= 0x10000);
+
+  dbg("prescaler=0x%x divisor=0x%x\n", prescaler, divisor);
+
+  mode  = wdt_prescaletoptv(prescaler);
+  mode &= ~C5471_TIMER_AUTORELOAD; /* One shot mode. */
+  mode |= divisor << 5;
+  dbg("mode=0x%x\n", mode);
+
+  c5471_wdt_cntl = mode;
+
+  /* Now start the watchdog */
+
+  c5471_wdt_cntl |= C5471_TIMER_STARTBIT;
+  dbg("cntl_timer=0x%x\n", c5471_wdt_cntl);
+
+  return 0;
+}
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_interrupt
+ **************************************************************************/
+
+static int wdt_interrupt(int irq, void *context)
+{
+  dbg("expired\n");
+
+#if defined(CONFIG_SOFTWARE_REBOOT)
+#  if defined(CONFIG_SOFTWARE_TEST)
+  dbg("  Test only\n");
+#  else
+  dbg("  Re-booting\n");
+#    warning "Add logic to reset CPU here"
+#  endif
+#else
+  dbg("  No reboot\n");
+#endif
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_read
+ **************************************************************************/
+
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen)
+{
+  /* We are going to return "NNNNNNNN NNNNNNNN."  The followig logic will
+   * not work if the user provides a buffer smaller than 18 bytes.
+   */
+
+  dbg("buflen=%d\n", buflen);
+  if (buflen >= 18)
+    {
+      sprintf(buffer, "#08x %08x\n", c5471_wdt_cntl, c5471_wdt_count);
+      return 18;
+    }
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_write
+ **************************************************************************/
+
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen)
+{
+  dbg("buflen=%d\n", buflen);
+  if (buflen)
+    {
+      /* Reset the timer to the maximum delay */
+
+      wdt_setusec(MAX_WDT_USEC);
+      return 1;
+    }
+
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_ioctl
+ **************************************************************************/
+
+static int wdt_ioctl(struct file *filep, int cmd, uint32 arg)
+{
+  dbg("ioctl Call: cmd=0x%x arg=0x%x", cmd, arg);
+
+  /* Process the the IOCTL command (see arch/watchdog.h) */
+
+  switch(cmd)
+    {
+    case WDIOC_KEEPALIVE:
+      wdt_setusec(MAX_WDT_USEC);
+      break;
+
+    default:
+      *get_errno_ptr() = ENOTTY;
+      return ERROR;
+    }
+
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_open
+ **************************************************************************/
+
+static int wdt_open(struct file *filep)
+{
+  dbg("");
+
+  if (g_wdtopen)
+    {
+      *get_errno_ptr() = EBUSY;
+    }
+
+  /* This will automatically load the timer with its max
+   * count and start it running.
+   */
+
+  c5471_wdt_cntl = C5471_DISABLE_VALUE1;
+  c5471_wdt_cntl = C5471_DISABLE_VALUE2;
+
+  g_wdtopen = TRUE;
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_close
+ **************************************************************************/
+
+static int wdt_close(struct file *filep)
+{
+  dbg("");
+
+  /* The task controlling the watchdog has terminated.  Take the timer
+   *  the
+   * watchdog in interrupt mode -- we are going to reset unless the
+   * reopened again soon.
+   */
+
+#ifndef CONFIG_WATCHDOG_STRICT
+  c5471_wdt_cntl = C5471_TIMER_MODE;
+#endif
+
+  g_wdtopen = FALSE;
+  return 0;
+}
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_wdtinit
+ **************************************************************************/
+
+int up_wdtinit(void)
+{
+  int ret;
+
+  dbg("C547x Watchdog Driver\n");
+
+  /* Register as /dev/wdt */
+
+  ret = register_inode("/dev/wdt", &g_wdtops, 0666, NULL);
+  if (ret)
+    {
+      return ERROR;
+    }
+
+  /* Register for an interrupt level callback through wdt_interrupt */
+
+  dbg("Attach to IRQ=%d\n", C5471_IRQ_WATCHDOG);
+
+  /* Make sure that the timer is stopped */
+
+  c5471_wdt_cntl = C5471_TIMER_STOP;
+
+  /* Request the interrupt. */
+
+  ret = irq_attach(C5471_IRQ_WATCHDOG, wdt_interrupt);
+  if (ret)
+    {
+      unregister_inode("/dev/wdt");
+      return ERROR;
+    }
+
+  return OK;
+}
diff --git a/nuttx/arch/arm/src/c5471/chip.h b/nuttx/arch/arm/src/c5471/chip.h
new file mode 100644
index 0000000000..74ff3c5093
--- /dev/null
+++ b/nuttx/arch/arm/src/c5471/chip.h
@@ -0,0 +1,323 @@
+/************************************************************
+ * c5471/chip.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __C5471_CHIP_H
+#define __C5471_CHIP_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* UARTs ****************************************************/
+
+#define UART_IRDA_BASE         0xffff0800
+#define UART_MODEM_BASE        0xffff1000
+#define UARTn_IO_RANGE         0x00000800
+
+/* Common UART Registers.  Expressed as offsets from the BASE address */
+
+#define UART_RHR_OFFS          0x00000000 /* Rcv Holding Register */
+#define UART_THR_OFFS          0x00000004 /* Xmit Holding Register */
+#define UART_FCR_OFFS          0x00000008 /* FIFO Control Register */
+#define UART_RFCR_OFFS         0x00000008 /* Rcv FIFO Control Register */
+#define UART_TFCR_OFFS         0x00000008 /* Xmit FIFO Control Register */
+#define UART_SCR_OFFS          0x0000000c /* Status Control Register */
+#define UART_LCR_OFFS          0x00000010 /* Line Control Register */
+#define UART_LSR_OFFS          0x00000014 /* Line Status Register */
+#define UART_SSR_OFFS          0x00000018 /* Supplementary Status Register */
+#define UART_MCR_OFFS          0x0000001c /* Modem Control Register */
+#define UART_MSR_OFFS          0x00000020 /* Modem Status Register */
+#define UART_IER_OFFS          0x00000024 /* Interrupt Enable Register */
+#define UART_ISR_OFFS          0x00000028 /* Interrupt Status Register */
+#define UART_EFR_OFFS          0x0000002c /* Enhanced Feature Register */
+#define UART_XON1_OFFS         0x00000030 /* XON1 Character Register */
+#define UART_XON2_OFFS         0x00000034 /* XON2 Character Register */
+#define UART_XOFF1_OFFS        0x00000038 /* XOFF1 Character Register */
+#define UART_XOFF2_OFFS        0x0000003c /* XOFF2 Character Register */
+#define UART_SPR_OFFS          0x00000040 /* Scratch-pad Register */
+#define UART_DIV_115K_OFFS     0x00000044 /* Divisor for baud generation */
+#define UART_DIV_BIT_RATE_OFFS 0x00000048 /* For baud rate generation */
+#define UART_TCR_OFFS          0x0000004c /* Transmission Control Register */
+#define UART_TLR_OFFS          0x00000050 /* Trigger Level Register */
+#define UART_MDR_OFFS          0x00000054 /* Mode Definition Register */
+
+/* Registers available only for the IrDA UART (absolute address). */
+
+#define UART_IRDA_MDR1         0xffff0854 /* Mode Definition Register 1 */
+#define UART_IRDA_MDR2         0xffff0858 /* Mode Definition Register 2 */
+#define UART_IRDA_TXFLL        0xffff085c /* LS Xmit Frame Length Register */
+#define UART_IRDA_TXFLH        0xffff0860 /* MS Xmit Frame Length Register */
+#define UART_IRDA_RXFLL        0xffff0864 /* LS Rcvd Frame Length Register */
+#define UART_IRDA_RXFLH        0xffff0868 /* MS Rcvd Frame Length Register */
+#define UART_IRDA_SFLSR        0xffff086c /* Status FIFO Line Status Reg */
+#define UART_IRDA_SFREGL       0xffff0870 /* LS Status FIFO Register */
+#define UART_IRDA_SFREGH       0xffff0874 /* MS Status FIFO Register */
+#define UART_IRDA_BLR          0xffff0878 /* Begin of File Length Register */
+#define UART_IRDA_PULSE_WIDTH  0xffff087c /* Pulse Width Register */
+#define UART_IRDA_ACREG        0xffff0880 /* Auxiliary Control Register */
+#define UART_IRDA_PULSE_START  0xffff0884 /* Start time of pulse */
+#define UART_IRDA_RX_W_PTR     0xffff0888 /* RX FIFO write pointer */
+#define UART_IRDA_RX_R_PTR     0xffff088c /* RX FIFO read pointer */
+#define UART_IRDA_TX_W_PTR     0xffff0890 /* TX FIFO write pointer */
+#define UART_IRDA_TX_R_PTR     0xffff0894 /* TX FIFO read pointer */
+#define UART_IRDA_STATUS_W_PTR 0xffff0898 /* Write pointer of status FIFO */
+#define UART_IRDA_STATUS_R_PTR 0xffff089c /* Read pointer of status FIFO */
+#define UART_IRDA_RESUME       0xffff08a0 /* Resume register */
+#define UART_IRDA_MUX          0xffff08a4 /* Selects UART_IRDA output mux */
+
+/* Registers available for the Modem UART (absolute addresses) */
+
+#define UART_MODEM_MDR         0xffff1054 /* Mode Definition Register */
+#define UART_MODEM_UASR        0xffff1058 /* UART Auto-baud Status Register */
+#define UART_MODEM_RDPTR_URX   0xffff105c /* RX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_URX   0xffff1060 /* RX FIFO Write Pointer Register */
+#define UART_MODEM_RDPTR_UTX   0xffff1064 /* TX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_UTX   0xffff1068 /* TX FIFO Write Pointer Register */
+
+/* UART Settings ********************************************/
+
+/* Miscellaneous UART settings. */
+
+#define UART_RX_FIFO_NOEMPTY 0x00000001
+#define UART_SSR_TXFULL      0x00000001
+#define UART_LSR_TREF        0x00000020
+
+#define UART_XMIT_FIFO_SIZE      64
+#define UART_IRDA_XMIT_FIFO_SIZE 64
+
+/* UART_LCR Register */
+                                        /* Bits 31-7: Reserved */
+#define UART_LCR_BOC         0x00000040 /* Bit 6: Break Control */
+                                        /* Bit 5: Parity Type 2 */
+#define UART_LCR_PAREVEN     0x00000010 /* Bit 4: Parity Type 1 */
+#define UART_LCR_PARODD      0x00000000
+#define UART_LCR_PAREN       0x00000008 /* Bit 3: Paity Enable */
+#define UART_LCR_PARDIS      0x00000000
+#define UART_LCR_2STOP       0x00000004 /* Bit 2: Number of stop bits */
+#define UART_LCR_1STOP       0x00000000
+#define UART_LCR_5BITS       0x00000000 /* Bits 0-1: Word-length */
+#define UART_LCR_6BITS       0x00000001
+#define UART_LCR_7BITS       0x00000002
+#define UART_LCR_8BITS       0x00000003
+
+#define UART_FCR_FTL         0x00000000
+#define UART_FCR_FIFO_EN     0x00000001
+#define UART_FCR_TX_CLR      0x00000002
+#define UART_FCR_RX_CLR      0x00000004
+
+#define UART_IER_RECVINT     0x00000001
+#define UART_IER_XMITINT     0x00000002
+#define UART_IER_LINESTSINT  0x00000004
+#define UART_IER_MODEMSTSINT 0x00000008 /* IrDA UART only */
+#define UART_IER_XOFFINT     0x00000020
+#define UART_IER_RTSINT      0x00000040 /* IrDA UART only */
+#define UART_IER_CTSINT      0x00000080 /* IrDA UART only */
+#define UART_IER_INTMASK     0x000000ff
+
+#define BAUD_115200          0x00000001
+#define BAUD_57600           0x00000002
+#define BAUD_38400           0x00000003
+#define BAUD_19200           0x00000006
+#define BAUD_9600            0x0000000C
+#define BAUD_4800            0x00000018
+#define BAUD_2400            0x00000030
+#define BAUD_1200            0x00000060
+
+#define MDR_UART_MODE        0x00000000  /* Both IrDA and Modem UARTs */
+#define MDR_SIR_MODE         0x00000001  /* IrDA UART only */
+#define MDR_AUTOBAUDING_MODE 0x00000002  /* Modem UART only */
+#define MDR_RESET_MODE       0x00000007  /* Both IrDA and Modem UARTs */
+
+/* SPI ******************************************************/
+
+#define MAX_SPI 3
+
+#define SPI_REGISTER_BASE    0xffff2000
+
+/* GIO ******************************************************/
+
+#define MAX_GIO (35)
+
+#define GIO_REGISTER_BASE    0xffff2800
+
+#define GPIO_IO              0xffff2800 /* Writeable when I/O is configured
+					 * as an output; reads value on I/O
+					 * pin when I/O is configured as an
+					 * input */
+#define GPIO_CIO             0xffff2804 /* GPIO configuration register */
+#define GPIO_IRQA            0xffff2808 /* In conjunction with GPIO_IRQB
+					 * determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_IRQB            0xffff280c /* Determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_DDIO            0xffff2810 /* Delta Detect Register
+					 * (detects changes in the I/O pins) */
+#define GPIO_EN              0xffff2814 /* Selects register for muxed GPIOs */
+
+#define KGIO_REGISTER_BASE   0xffff2900
+
+#define KBGPIO_IO            0xffff2900 /* Keyboard I/O bits: Writeable
+					 * when KBGPIO is configured as an
+					 * output; reads value on I/O pin
+					 * when KBGPIO is configured as an
+					 * input */
+#define KBGPIO_CIO           0xffff2904 /* KBGPIO configuration register */
+#define KBGPIO_IRQA          0xffff2908 /* In conjunction with KBGPIO_IRQB
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_IRQB          0xffff290c /* In conjunction with KBGPIO_IRQA
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_DDIO          0xffff2910 /* Delta Detect Register (detects
+					 * changes in the KBGPIO pins) */
+#define KBGPIO_EN            0xffff2914 /* Selects register for muxed
+					 * KBGPIOs */
+
+/* Timers ***************************************************/
+
+#define C5471_TIMER0_CTRL    0xffff2a00
+#define C5471_TIMER0_CNT     0xffff2a04
+#define C5471_TIMER1_CTRL    0xffff2b00
+#define C5471_TIMER1_CNT     0xffff2b04
+#define C5471_TIMER2_CTRL    0xffff2c00
+
+#define C5471_TIMER2_CNT     0xffff2c04
+
+/* Interrupts */
+
+#define HAVE_SRC_IRQ_BIN_REG 0
+
+#define INT_FIRST_IO         0xffff2d00
+#define INT_IO_RANGE         0x5C
+
+#define IT_REG               0xffff2d00
+#define MASK_IT_REG          0xffff2d04
+#define SRC_IRQ_REG          0xffff2d08
+#define SRC_FIQ_REG          0xffff2d0c
+#define SRC_IRQ_BIN_REG      0xffff2d10
+#define INT_CTRL_REG         0xffff2d18
+
+#define ILR_IRQ0_REG         0xffff2d1C /*  0-Timer 0       */
+#define ILR_IRQ1_REG         0xffff2d20 /*  1-Timer 1       */
+#define ILR_IRQ2_REG         0xffff2d24 /*  2-Timer 2       */
+#define ILR_IRQ3_REG         0xffff2d28 /*  3-GPIO0         */
+#define ILR_IRQ4_REG         0xffff2d2c /*  4-Ethernet      */
+#define ILR_IRQ5_REG         0xffff2d30 /*  5-KBGPIO[7:0]   */
+#define ILR_IRQ6_REG         0xffff2d34 /*  6-Uart   serial */
+#define ILR_IRQ7_REG         0xffff2d38 /*  7-Uart   IRDA   */
+#define ILR_IRQ8_REG         0xffff2d3c /*  8-KBGPIO[15:8]  */
+#define ILR_IRQ9_REG         0xffff2d40 /*  9-GPIO3         */
+#define ILR_IRQ10_REG        0xffff2d44 /* 10-GPIO2         */
+#define ILR_IRQ11_REG        0xffff2d48 /* 11-I2C           */
+#define ILR_IRQ12_REG        0xffff2d4c /* 12-GPIO1         */
+#define ILR_IRQ13_REG        0xffff2d50 /* 13-SPI           */
+#define ILR_IRQ14_REG        0xffff2d54 /* 14-GPIO[19:4]    */
+#define ILR_IRQ15_REG        0xffff2d58 /* 15-API           */
+
+/* I2C ******************************************************/
+
+#define MAX_I2C 1
+
+/* API ******************************************************/
+
+#define DSPRAM_BASE          0xffe00000  /* DSPRAM base address */
+#define DSPRAM_END           0xffe03fff
+
+/* This is the API address range in the DSP address space. */
+
+#define DSPMEM_DSP_START     0x2000
+#define DSPMEM_DSP_END       0x3fff
+
+/* This is the API address range in the ARM address space. */
+
+#define DSPMEM_ARM_START     DSPRAM_BASE /* Defined in hardware.h */
+#define DSPMEM_ARM_END       DSPRAM_END
+
+/* DSPMEM_IN_RANGE is a generic macro to test is a value is within
+ * a range of values.
+ */
+
+#define DSPMEM_IN_RANGE(addr, start, end) \
+  ((((__u32)(addr)) >= (start)) && (((__u32)(addr)) <= (end)))
+
+/* DSPMEM_ADDR_ALIGNED verifies that a potential DSP address is
+ * properly word aligned.
+ */
+
+#define DSPMEM_ADDR_ALIGNED(addr, cpu) ((((__u32)(addr)) & 1) == 0)
+
+/* DSPMEM_DSP_ADDR checks if a DSP address lies in within the
+ * DSP's API address range.
+ */
+
+#define DSPMEM_DSP_ADDR(addr, cpu) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_DSP_START, DSPMEM_DSP_END)
+
+/* DSPMEM_ARM_ADDR checks if a ARM address lies in within the
+ * ARM's API address range.
+ */
+
+#define DSPMEM_ARM_ADDR(addr) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_ARM_START, DSPMEM_ARM_END)
+
+/* DSPMEM_DSP_TO_ARM maps a DSP API address into an ARM API address */
+
+#define DSPMEM_DSP_TO_ARM(addr, cpu) \
+  ((((__u32)(addr) - DSPMEM_DSP_START) << 1) + DSPMEM_ARM_START)
+
+/* DSPMEM_ARM_TO_DSP maps an ARM API address into a DSP API address */
+
+#define DSPMEM_ARM_TO_DSP(addr) \
+  ((((__u32)(addr) - DSPMEM_ARM_START) >> 1) + DSPMEM_DSP_START)
+
+/************************************************************
+ * Inline Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+extern void c5471_doirq(int irq, uint32* regs);
+#endif
+
+#endif  /* __C5471_CHIP_H */