Beginnings of PIC32 build environment

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@3619 7fd9a85b-ad96-42d3-883c-3090e2eb8679

18 files changed, 2678 insertions, 109 deletions

diff --git a/nuttx/arch/mips/include/mips32/irq.h b/nuttx/arch/mips/include/mips32/irq.h
index e2bb784bce..845eddaad7 100755
--- a/nuttx/arch/mips/include/mips32/irq.h
+++ b/nuttx/arch/mips/include/mips32/irq.h
@@ -48,12 +48,31 @@
  * Definitions
  ****************************************************************************/
 
+/* Lots of missing logic here */
+
+#define XCPTCONTEXT_REGS 1
+
 /****************************************************************************
  * Public Types
  ****************************************************************************/
 
 #ifndef __ASSEMBLY__
 
+struct xcptcontext
+{
+  /* The following function pointer is non-NULL if there are pending signals
+   * to be processed.
+   */
+
+#ifndef CONFIG_DISABLE_SIGNALS
+  void *sigdeliver; /* Actual type is sig_deliver_t */
+#endif
+
+  /* Register save area */
+
+  uint32_t regs[XCPTCONTEXT_REGS];
+};
+
 /****************************************************************************
  * Inline functions
  ****************************************************************************/
diff --git a/nuttx/arch/mips/src/Makefile b/nuttx/arch/mips/src/Makefile
new file mode 100644
index 0000000000..872b7e568a
--- /dev/null
+++ b/nuttx/arch/mips/src/Makefile
@@ -0,0 +1,138 @@
+############################################################################
+# arch/mips/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_ARCH_MIPS),y)
+ARCH_SUBDIR     = mips32
+endif
+
+ifeq ($(WINTOOL),y)
+  NUTTX		= "${shell cygpath -w $(TOPDIR)/nuttx}"
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+		   -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
+		   -I "${shell cygpath -w $(TOPDIR)/sched}"
+else
+  NUTTX		= $(TOPDIR)/nuttx
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
+		   -I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
+endif
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+ifeq ($(WINTOOL),y)
+  LIBPATHS	= ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  LIBPATHS	+= -L"${shell cygpath -w $(BOARDDIR)}"
+else
+  LIBPATHS	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+  LIBPATHS	+= -L"$(BOARDDIR)"
+endif
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= "${shell $(CC) -print-libgcc-file-name}"
+
+VPATH		= chip:common:$(ARCH_SUBDIR)
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+board/libboard$(LIBEXT):
+	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRADEFINES=$(EXTRADEFINES)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	@echo "LD: nuttx"
+	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_AOBJ) $(EXTRA_OBJS) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC)
+	@$(NM) $(NUTTX)$(EXEEXT) | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
+		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
+	fi
+
+.depend: Makefile chip/Make.defs $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
+	fi
+	@$(MKDEP) --dep-path chip --dep-path common --dep-path $(ARCH_SUBDIR) \
+	 $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/arch/mips/src/common/up_arch.h b/nuttx/arch/mips/src/common/up_arch.h
new file mode 100644
index 0000000000..97f62e5535
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_arch.h
@@ -0,0 +1,89 @@
+/****************************************************************************
+ * arch/mips/src/common/up_arch.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef ___ARCH_ARM_SRC_COMMON_UP_ARCH_H
+#define ___ARCH_ARM_SRC_COMMON_UP_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(a)           (*(volatile uint8_t *)(a))
+# define putreg8(v,a)         (*(volatile uint8_t *)(a) = (v))
+# define getreg16(a)          (*(volatile uint16_t *)(a))
+# define putreg16(v,a)        (*(volatile uint16_t *)(a) = (v))
+# define getreg32(a)          (*(volatile uint32_t *)(a))
+# define putreg32(v,a)        (*(volatile uint32_t *)(a) = (v))
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/* Atomic modification of registers */
+
+EXTERN void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits);
+EXTERN void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits);
+EXTERN void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ___ARCH_ARM_SRC_COMMON_UP_ARCH_H */
diff --git a/nuttx/arch/mips/src/common/up_modifyreg16.c b/nuttx/arch/mips/src/common/up_modifyreg16.c
new file mode 100644
index 0000000000..ca72dec3ed
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_modifyreg16.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg16.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg16
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits)
+{
+  irqstate_t flags;
+  uint16_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg16(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg16(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/mips/src/common/up_modifyreg32.c b/nuttx/arch/mips/src/common/up_modifyreg32.c
new file mode 100644
index 0000000000..59bb3a1d82
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_modifyreg32.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg32.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg32
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits)
+{
+  irqstate_t flags;
+  uint32_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg32(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg32(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/configs/pcblogic-pic32mx/src/pcblogic_internal.h b/nuttx/arch/mips/src/common/up_modifyreg8.c
index ca160dd2dc..b590458b3b 100755..100644
--- a/nuttx/configs/pcblogic-pic32mx/src/pcblogic_internal.h
+++ b/nuttx/arch/mips/src/common/up_modifyreg8.c
@@ -1,77 +1,85 @@
-/****************************************************************************

- * configs/pcblogic-pic32mx/src/pcblogic_internal.h

- *

- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions

- * are met:

- *

- * 1. Redistributions of source code must retain the above copyright

- *    notice, this list of conditions and the following disclaimer.

- * 2. Redistributions in binary form must reproduce the above copyright

- *    notice, this list of conditions and the following disclaimer in

- *    the documentation and/or other materials provided with the

- *    distribution.

- * 3. Neither the name NuttX nor the names of its contributors may be

- *    used to endorse or promote products derived from this software

- *    without specific prior written permission.

- *

- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

- * POSSIBILITY OF SUCH DAMAGE.

- *

- ****************************************************************************/

-

-#ifndef __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H

-#define __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H

-

-/****************************************************************************

- * Included Files

- ****************************************************************************/

-

-#include <nuttx/config.h>

-

-/****************************************************************************

- * Pre-Processor Definitions

- ****************************************************************************/

-/* Configuration ************************************************************/

-

-/****************************************************************************

- * Public Types

- ****************************************************************************/

-

-#ifndef __ASSEMBLY__

-

-/****************************************************************************

- * Inline Functions

- ****************************************************************************/

-

-/****************************************************************************

- * Public Function Prototypes

- ****************************************************************************/

-

-#ifdef __cplusplus

-#define EXTERN extern "C"

-extern "C" {

-#else

-#define EXTERN extern

-#endif

-

-#undef EXTERN

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __ASSEMBLY__ */

-#endif /* __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H */

+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg8.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg8
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits)
+{
+  irqstate_t flags;
+  uint8_t    regval;
+
+  flags   = irqsave();
+  regval  = getreg8(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg8(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/mips/src/pic32mx/Make.defs b/nuttx/arch/mips/src/pic32mx/Make.defs
new file mode 100755
index 0000000000..be5296f1d7
--- /dev/null
+++ b/nuttx/arch/mips/src/pic32mx/Make.defs
@@ -0,0 +1,51 @@
+############################################################################
+# arch/mips/src/pic32mx/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# The start-up, "head", file
+
+HEAD_ASRC =
+
+# Common MIPS files
+
+CMN_ASRCS = 
+CMN_CSRCS = up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c
+
+# Required PIC32MX files
+
+CHIP_ASRCS =
+CHIP_CSRCS = 
+
+# Configuration-dependent PIC32MX files
+
diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h
new file mode 100755
index 0000000000..7c40bff8db
--- /dev/null
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h
@@ -0,0 +1,428 @@
+/************************************************************************************
+ * arch/mips/src/pic32mx/pic32mx-internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
+#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "up_internal.h"
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Configuration ********************************************************************/
+
+/* Bit-encoded input to pic32mx_configgpio() ****************************************/
+/* To be provided */
+
+/* GPIO pin definitions *************************************************************/
+/* To be provided */
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+typedef FAR void *DMA_HANDLE;
+typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result);
+
+/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
+
+#ifdef CONFIG_DEBUG_DMA
+struct pic32mx_dmaglobalregs_s
+{
+  /* Global Registers */
+#warning "Missing definitions"
+};
+
+struct pic32mx_dmachanregs_s
+{
+  /* Channel Registers */
+#warning "Missing definitions"
+};
+
+struct pic32mx_dmaregs_s
+{
+  /* Global Registers */
+
+  struct pic32mx_dmaglobalregs_s gbl;
+
+  /* Channel Registers */
+
+  struct pic32mx_dmachanregs_s   ch;
+};
+#endif
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: pic32mx_clockconfig
+ *
+ * Description:
+ *   Called to initialize the PIC32MX.  This does whatever setup is needed to put the
+ *   MCU in a usable state.  This includes the initialization of clocking using the
+ *   settings in board.h.
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_clockconfig(void);
+
+/************************************************************************************
+ * Name: pic32mx_lowsetup
+ *
+ * Description:
+ *   Called at the very beginning of _start.  Performs low level initialization
+ *   including setup of the console UART.  This UART done early so that the serial
+ *   console is available for debugging very early in the boot sequence.
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_lowsetup(void);
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqinitialize
+ *
+ * Description:
+ *   Initialize logic to support a second level of interrupt decoding for GPIO pins.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqinitialize(void);
+#else
+#  define pic32mx_gpioirqinitialize()
+#endif
+
+/************************************************************************************
+ * Name: pic32mx_configgpio
+ *
+ * Description:
+ *   Configure a GPIO pin based on bit-encoded description of the pin.
+ *
+ ************************************************************************************/
+
+EXTERN int pic32mx_configgpio(uint16_t cfgset);
+
+/************************************************************************************
+ * Name: pic32mx_gpiowrite
+ *
+ * Description:
+ *   Write one or zero to the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_gpiowrite(uint16_t pinset, bool value);
+
+/************************************************************************************
+ * Name: pic32mx_gpioread
+ *
+ * Description:
+ *   Read one or zero from the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN bool pic32mx_gpioread(uint16_t pinset);
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqenable
+ *
+ * Description:
+ *   Enable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqenable(int irq);
+#else
+#  define pic32mx_gpioirqenable(irq)
+#endif
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqdisable
+ *
+ * Description:
+ *   Disable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqdisable(int irq);
+#else
+#  define pic32mx_gpioirqdisable(irq)
+#endif
+
+/************************************************************************************
+ * Function:  pic32mx_dumpgpio
+ *
+ * Description:
+ *   Dump all GPIO registers associated with the base address of the provided pinset.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_DEBUG_GPIO
+EXTERN int pic32mx_dumpgpio(uint16_t pinset, const char *msg);
+#else
+#  define pic32mx_dumpgpio(p,m)
+#endif
+
+/************************************************************************************
+ * Name:  pic32mx_spiNselect, pic32mx_spiNstatus, and pic32mx_spiNcmddata
+ *
+ * Description:
+ *   These external functions must be provided by board-specific logic.  They are
+ *   implementations of the select, status, and cmddata methods of the SPI interface
+ *   defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods 
+ *   including up_spiinitialize()) are provided by common PIC32MX logic.  To use
+ *   this common SPI logic on your board:
+ *
+ *   1. Provide logic in pic32mx_boardinitialize() to configure SPI/SSP chip select
+ *      pins.
+ *   2. Provide pic32mx_spiNselect() and pic32mx_spiNstatus() functions
+ *      in your board-specific logic.  These functions will perform chip selection
+ *      and status operations using GPIOs in the way your board is configured.
+ *   2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
+ *      pic32mx_spiNcmddata() functions in your board-specific logic.  These
+ *      functions will perform cmd/data selection operations using GPIOs in the way
+ *      your board is configured.
+ *   3. Add a call to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling 
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+struct spi_dev_s;
+enum spi_dev_e;
+
+#ifdef CONFIG_PIC32MX_SPI1
+EXTERN void  pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+#ifdef CONFIG_PIC32MX_SPI2
+EXTERN void  pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int pic32mx_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_spiflush
+ *
+ * Description:
+ *   Flush and discard any words left in the RX fifo.  This can be called
+ *   from ssp0/1select after a device is deselected (if you worry about such
+ *   things).
+ *
+ * Input Parameters:
+ *   dev - Device-specific state data
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+struct spi_dev_s;
+#if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
+EXTERN void pic32mx_spiflush(FAR struct spi_dev_s *dev);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmainitialize
+ *
+ * Description:
+ *   Initialize the GPDMA subsystem.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmainitilaize(void);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmachannel
+ *
+ * Description:
+ *   Allocate a DMA channel.  This function sets aside a DMA channel and
+ *   gives the caller exclusive access to the DMA channel.
+ *
+ * Returned Value:
+ *   One success, this function returns a non-NULL, void* DMA channel
+ *   handle.  NULL is returned on any failure.  This function can fail only
+ *   if no DMA channel is available.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN DMA_HANDLE pic32mx_dmachannel(void);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmafree
+ *
+ * Description:
+ *   Release a DMA channel.  NOTE:  The 'handle' used in this argument must
+ *   NEVER be used again until pic32mx_dmachannel() is called again to re-gain
+ *   a valid handle.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmafree(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmasetup
+ *
+ * Description:
+ *   Configure DMA for one transfer.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN int pic32mx_dmarxsetup(DMA_HANDLE handle,
+                            uint32_t control, uint32_t config,
+                            uint32_t srcaddr, uint32_t destaddr,
+                            size_t nbytes);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmastart
+ *
+ * Description:
+ *   Start the DMA transfer
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN int pic32mx_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmastop
+ *
+ * Description:
+ *   Cancel the DMA.  After pic32mx_dmastop() is called, the DMA channel is
+ *   reset and pic32mx_dmasetup() must be called before pic32mx_dmastart() can be
+ *   called again
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmastop(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmasample
+ *
+ * Description:
+ *   Sample DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void pic32mx_dmasample(DMA_HANDLE handle, struct pic32mx_dmaregs_s *regs);
+#else
+#  define pic32mx_dmasample(handle,regs)
+#endif
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmadump
+ *
+ * Description:
+ *   Dump previously sampled DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void pic32mx_dmadump(DMA_HANDLE handle, const struct pic32mx_dmaregs_s *regs,
+                          const char *msg);
+#else
+#  define pic32mx_dmadump(handle,regs,msg)
+#endif
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H */
diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h b/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
index 061859806e..f81e9695c4 100755
--- a/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
@@ -126,7 +126,7 @@
 

 /* Parallel Master Register Base Address */

 

-#  define PCI32MX_PMP_K1BASE        (PIC32MX_SFR_K1BASE + 0x00007000)

+#  define PIC32MX_PMP_K1BASE        (PIC32MX_SFR_K1BASE + 0x00007000)

 

 /* ADC Register Base Addresses */

 

diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h b/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
index a68176bded..0eac80fc89 100755
--- a/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
@@ -80,34 +80,34 @@
 

 /* Register Addresses ***************************************************************/

 

-#define PIC32MX_PMP_CON            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CON_OFFSET)

-#define PIC32MX_PMP_CONCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONCLR_OFFSET)

-#define PIC32MX_PMP_CONSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONSET_OFFSET)

-#define PIC32MX_PMP_CONINV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONINV_OFFSET)

-#define PIC32MX_PMP_MODE           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODE_OFFSET)

-#define PIC32MX_PMP_MODECLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODECLR_OFFSET)

-#define PIC32MX_PMP_MODESET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODESET_OFFSET)

-#define PIC32MX_PMP_MODEINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODEINV_OFFSET)

-#define PIC32MX_PMP_ADDR           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDR_OFFSET)

-#define PIC32MX_PMP_ADDRCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRCLR_OFFSET)

-#define PIC32MX_PMP_ADDRSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRSET_OFFSET)

-#define PIC32MX_PMP_ADDRINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRINV_OFFSET)

-#define PIC32MX_PMP_DOUT           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUT_OFFSET)

-#define PIC32MX_PMP_DOUTCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTCLR_OFFSET)

-#define PIC32MX_PMP_DOUTSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTSET_OFFSET)

-#define PIC32MX_PMP_DOUTINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTINV_OFFSET)

-#define PIC32MX_PMP_DIN            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DIN_OFFSET)

-#define PIC32MX_PMP_DINCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DINCLR_OFFSET)

-#define PIC32MX_PMP_DINSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DINSET_OFFSET)

-#define PIC32MX_PMP_DININV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DININV_OFFSET)

-#define PIC32MX_PMP_AEN            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AEN_OFFSET)

-#define PIC32MX_PMP_AENCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENCLR_OFFSET)

-#define PIC32MX_PMP_AENSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENSET_OFFSET)

-#define PIC32MX_PMP_AENINV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENINV_OFFSET)

-#define PIC32MX_PMP_STAT           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STAT_OFFSET)

-#define PIC32MX_PMP_STATCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATCLR_OFFSET)

-#define PIC32MX_PMP_STATSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATSET_OFFSET)

-#define PIC32MX_PMP_STATINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATINV_OFFSET)

+#define PIC32MX_PMP_CON            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CON_OFFSET)

+#define PIC32MX_PMP_CONCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONCLR_OFFSET)

+#define PIC32MX_PMP_CONSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONSET_OFFSET)

+#define PIC32MX_PMP_CONINV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONINV_OFFSET)

+#define PIC32MX_PMP_MODE           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODE_OFFSET)

+#define PIC32MX_PMP_MODECLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODECLR_OFFSET)

+#define PIC32MX_PMP_MODESET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODESET_OFFSET)

+#define PIC32MX_PMP_MODEINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODEINV_OFFSET)

+#define PIC32MX_PMP_ADDR           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDR_OFFSET)

+#define PIC32MX_PMP_ADDRCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRCLR_OFFSET)

+#define PIC32MX_PMP_ADDRSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRSET_OFFSET)

+#define PIC32MX_PMP_ADDRINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRINV_OFFSET)

+#define PIC32MX_PMP_DOUT           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUT_OFFSET)

+#define PIC32MX_PMP_DOUTCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTCLR_OFFSET)

+#define PIC32MX_PMP_DOUTSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTSET_OFFSET)

+#define PIC32MX_PMP_DOUTINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTINV_OFFSET)

+#define PIC32MX_PMP_DIN            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DIN_OFFSET)

+#define PIC32MX_PMP_DINCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DINCLR_OFFSET)

+#define PIC32MX_PMP_DINSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DINSET_OFFSET)

+#define PIC32MX_PMP_DININV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DININV_OFFSET)

+#define PIC32MX_PMP_AEN            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AEN_OFFSET)

+#define PIC32MX_PMP_AENCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENCLR_OFFSET)

+#define PIC32MX_PMP_AENSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENSET_OFFSET)

+#define PIC32MX_PMP_AENINV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENINV_OFFSET)

+#define PIC32MX_PMP_STAT           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STAT_OFFSET)

+#define PIC32MX_PMP_STATCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATCLR_OFFSET)

+#define PIC32MX_PMP_STATSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATSET_OFFSET)

+#define PIC32MX_PMP_STATINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATINV_OFFSET)

 

 /* Register Bit-Field Definitions ***************************************************/

 

diff --git a/nuttx/configs/pcblogic-pic32mx/README.txt b/nuttx/configs/pcblogic-pic32mx/README.txt
index 4df0b6d95f..d9c4a8588d 100644
--- a/nuttx/configs/pcblogic-pic32mx/README.txt
+++ b/nuttx/configs/pcblogic-pic32mx/README.txt
@@ -10,12 +10,215 @@ Contents
 ========
 
   Toolchains
+  PIC32MX Configuration Options
+  Configurations
 
 Toolchains
 ==========
 
   I am using the free, LITE version of the PIC32MX toolchain available
   for download from the microchip.com web site.  I am using the Windows
-  version.  This is only toolchain currently supported in these
-  configurations, but it should be a simple matter to adapt to other
-  toolchains by modifying the Make.defs file include in each configuration.
+  version.  The MicroChip toolchain is the only toolchaing currently
+  supported in these configurations, but it should be a simple matter to
+  adapt to other toolchains by modifying the Make.defs file include in
+  each configuration.
+
+  Toolchain Options:
+
+  CONFIG_PIC32MX_MICROCHIPW      - MicroChip full toolchain for Windows
+  CONFIG_PIC32MX_MICROCHIPL      - MicroChip full toolchain for Linux
+  CONFIG_PIC32MX_MICROCHIPW_LITE - MicroChip LITE toolchain for Windows
+  CONFIG_PIC32MX_MICROCHIPL_LITE - MicroChip LITE toolchain for Linux
+
+  Windows Native Toolchains
+  
+  NOTE:  There are several limitations to using a Windows based toolchain in a
+  Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had not effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+     Support has been added for making dependencies with the windows-native toolchains.
+     That support can be enabled by modifying your Make.defs file as follows:
+
+    -  MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+    +  MKDEP                = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
+
+     If you have problems with the dependency build (for example, if you are not
+     building on C:), then you may need to modify tools/mkdeps.sh
+
+PIC32MX Configuration Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  General Architecture Settings:
+
+    CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+     be set to:
+
+       CONFIG_ARCH=mips
+
+    CONFIG_ARCH_family - For use in C code:
+
+       CONFIG_ARCH_MIPS=y
+
+    CONFIG_ARCH_architecture - For use in C code:
+
+       CONFIG_ARCH_MIPS32=y
+
+    CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+       CONFIG_ARCH_CHIP=pic32mx
+
+    CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+       chip:
+
+       CONFIG_ARCH_CHIP_PIC32MX460F512L=y
+
+    CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+       hence, the board that supports the particular chip or SoC.
+
+       CONFIG_ARCH_BOARD=pcblogic-pic32mx
+
+    CONFIG_ARCH_BOARD_name - For use in C code
+
+       CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y
+
+    CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+       of delay loops
+
+    CONFIG_ENDIAN_BIG - define if big endian (default is little
+       endian)
+
+    CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
+
+       CONFIG_DRAM_SIZE=(32*1024) (32Kb)
+
+       There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
+
+    CONFIG_DRAM_START - The start address of installed DRAM
+
+       CONFIG_DRAM_START=0x10000000
+
+    CONFIG_DRAM_END - Last address+1 of installed RAM
+
+       CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+
+    CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization
+
+       CONFIG_ARCH_IRQPRIO=y
+
+    CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+       have LEDs
+
+    CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+       stack. If defined, this symbol is the size of the interrupt
+       stack in bytes.  If not defined, the user task stacks will be
+       used during interrupt handling.
+
+    CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+    CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+
+    CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+       cause a 100 second delay during boot-up.  This 100 second delay
+       serves no purpose other than it allows you to calibratre
+       CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+       the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+       the delay actually is 100 seconds.
+
+    Individual subsystems can be enabled:
+
+       CONFIG_PIC32MX_WDT
+       CONFIG_PIC32MX_RTCC
+       CONFIG_PIC32MX_TIMER1
+       CONFIG_PIC32MX_TIMER2
+       CONFIG_PIC32MX_TIMER3
+       CONFIG_PIC32MX_TIMER4
+       CONFIG_PIC32MX_TIMER5
+       CONFIG_PIC32MX_IC1
+       CONFIG_PIC32MX_IC2
+       CONFIG_PIC32MX_IC3
+       CONFIG_PIC32MX_IC4
+       CONFIG_PIC32MX_IC5
+       CONFIG_PIC32MX_OC1
+       CONFIG_PIC32MX_OC2
+       CONFIG_PIC32MX_OC3
+       CONFIG_PIC32MX_OC4
+       CONFIG_PIC32MX_OC5
+       CONFIG_PIC32MX_I2C1
+       CONFIG_PIC32MX_I2C2
+       CONFIG_PIC32MX_SPI1
+       CONFIG_PIC32MX_SPI2
+       CONFIG_PIC32MX_UART1
+       CONFIG_PIC32MX_UART2
+       CONFIG_PIC32MX_PMP
+       CONFIG_PIC32MX_ADC
+       CONFIG_PIC32MX_CVR
+       CONFIG_PIC32MX_CM1
+       CONFIG_PIC32MX_CM2
+       CONFIG_PIC32MX_OSC
+       CONFIG_PIC32MX_DDP
+       CONFIG_PIC32MX_FLASH
+       CONFIG_PIC32MX_BMX
+       CONFIG_PIC32MX_DMA
+       CONFIG_PIC32MX_CHE
+       CONFIG_PIC32MX_USB
+       CONFIG_PIC32MX_IOPORTA
+       CONFIG_PIC32MX_IOPORTB
+       CONFIG_PIC32MX_IOPORTC
+       CONFIG_PIC32MX_IOPORTD
+       CONFIG_PIC32MX_IOPORTE
+       CONFIG_PIC32MX_IOPORTF
+       CONFIG_PIC32MX_IOPORTG
+
+  PIC32MXx specific device driver settings
+
+    CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+       console and ttys0 (default is the UART0).
+    CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_UARTn_2STOP - Two stop bits
+
+  PIC32MXx USB Device Configuration
+
+  PIC32MXx USB Host Configuration (the PIC32MX does not support USB Host)
+
+Configurations
+^^^^^^^^^^^^^^
+
+Each PIC32MX configuration is maintained in a sudirectory and can be
+selected as follow:
+
+    cd tools
+    ./configure.sh pcblogic-pic32mx/<subdir>
+    cd -
+    . ./setenv.sh
+
+Where <subdir> is one of the following:
+
+  ostest:
+    This configuration directory, performs a simple OS test using
+    apps/examples/ostest.
diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/Make.defs b/nuttx/configs/pcblogic-pic32mx/ostest/Make.defs
new file mode 100644
index 0000000000..8e51ab6b3b
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/ostest/Make.defs
@@ -0,0 +1,160 @@
+############################################################################
+# configs/pcblogic-pic32mx/ostest/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_PIC32MX_MICROCHIPW),y)
+  # Microchip toolchain under Windows
+  CROSSDEV = pic32-
+  WINTOOL = y
+  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
+  ARCHPICFLAGS = -fpic -membedded-pic
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_PIC32MX_MICROCHIPW_LITE),y)
+  # Microchip toolchain under Windows
+  CROSSDEV = pic32-
+  WINTOOL = y
+#  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
+  ARCHPICFLAGS = -fpic -membedded-pic
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_PIC32MX_MICROCHIPL),y)
+  # Microchip toolchain under Linux
+  CROSSDEV = pic32-
+  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
+  ARCHPICFLAGS = -fpic -membedded-pic
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_PIC32MX_MICROCHIPL_LITE),y)
+  # Microchip toolchain under Linux
+  CROSSDEV = pic32-
+#  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
+  ARCHPICFLAGS = -fpic -membedded-pic
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/defconfig b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig
new file mode 100644
index 0000000000..ffb9c14421
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig
@@ -0,0 +1,860 @@
+############################################################################
+# configs/pcblogic-pic32mx/ostest/defconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip family.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=mips
+CONFIG_ARCH_MIPS=y
+CONFIG_ARCH_MIPS32=y
+CONFIG_ARCH_CHIP=pic32mx
+CONFIG_ARCH_CHIP_PIC32MX460F512L=y
+CONFIG_ARCH_BOARD=pcblogic-pic32mx
+CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y
+CONFIG_BOARD_LOOPSPERMSEC=8079
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0xa0000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_PIC32MX_MICROCHIPW=n
+CONFIG_PIC32MX_MICROCHIPL=n
+CONFIG_PIC32MX_MICROCHIPW_LITE=y
+CONFIG_PIC32MX_MICROCHIPL_LITE=n
+
+#
+#  Individual subsystems can be enabled:
+#
+
+CONFIG_PIC32MX_WDT=n
+CONFIG_PIC32MX_RTCC=n
+CONFIG_PIC32MX_TIMER1=n
+CONFIG_PIC32MX_TIMER2=n
+CONFIG_PIC32MX_TIMER3=n
+CONFIG_PIC32MX_TIMER4=n
+CONFIG_PIC32MX_TIMER5=n
+CONFIG_PIC32MX_IC1=n
+CONFIG_PIC32MX_IC2=n
+CONFIG_PIC32MX_IC3=n
+CONFIG_PIC32MX_IC4=n
+CONFIG_PIC32MX_IC5=n
+CONFIG_PIC32MX_OC1=n
+CONFIG_PIC32MX_OC2=n
+CONFIG_PIC32MX_OC3=n
+CONFIG_PIC32MX_OC4=n
+CONFIG_PIC32MX_OC5=n
+CONFIG_PIC32MX_I2C1=n
+CONFIG_PIC32MX_I2C2=n
+CONFIG_PIC32MX_SPI1=n
+CONFIG_PIC32MX_SPI2=n
+CONFIG_PIC32MX_UART1=y
+CONFIG_PIC32MX_UART2=n
+CONFIG_PIC32MX_PMP=n
+CONFIG_PIC32MX_ADC=n
+CONFIG_PIC32MX_CVR=n
+CONFIG_PIC32MX_CM1=n
+CONFIG_PIC32MX_CM2=n
+CONFIG_PIC32MX_OSC=y
+CONFIG_PIC32MX_DDP=n
+CONFIG_PIC32MX_FLASH=n
+CONFIG_PIC32MX_BMX=n
+CONFIG_PIC32MX_DMA=n
+CONFIG_PIC32MX_CHE=n
+CONFIG_PIC32MX_USB=n
+CONFIG_PIC32MX_IOPORTA=y
+CONFIG_PIC32MX_IOPORTB=y
+CONFIG_PIC32MX_IOPORTC=y
+CONFIG_PIC32MX_IOPORTD=y
+CONFIG_PIC32MX_IOPORTE=y
+CONFIG_PIC32MX_IOPORTF=y
+CONFIG_PIC32MX_IOPORTG=y
+
+#
+# PIC32MX specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+#   console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=n
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=y
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+#   or TICKS_PER_MSEC=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=4
+CONFIG_START_DAY=8
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# Settings for nxflat
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+#  This format will support execution of NuttX binaries located
+#  in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
+#  with.  CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
+#  CONFIG_DEBUG_BINFMT have to be defined or
+#  CONFIG_NXFLAT_DUMPBUFFER does nothing.
+# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
+#  is ordered by symbol name
+#
+CONFIG_NXFLAT=n
+CONFIG_NXFLAT_DUMPBUFFER=n
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+#   Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+#   Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+#   Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+#   Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+#   Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+#   SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+#   Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+#   SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+#   Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+#   Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+#   Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+#   Will cause USB features to indicate that the device is
+#   self-powered
+# CONFIG_USBDEV_MAXPOWER
+#   Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+#   Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+#   Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+#   Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+#   The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+#   The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+#   The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+#   Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+#   Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+#   Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+#   The logical 7-bit address of a hardware endpoints that support
+#   bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+#   The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+#   The size of the buffer in each write/read request.  This
+#   value needs to be at least as large as the endpoint
+#   maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+#   The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+#   The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+#   Select if the media is removable
+#
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+#
+# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act
+#   as either the client side or server side of the test
+# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the
+#   client side simply receives messages forever, allowing
+#   measurement of throughput
+# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has
+#   no MAC address; one will be assigned
+# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address
+# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address
+# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
+# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
+#   client side of the test (may be target or host)
+#
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_STACKSIZE=2048
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=1
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+#    Only verify IN (device-to-host) data transfers.  Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+#    Only verify OUT (host-to-device) data transfers.  Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+#    Send only small, single packet messages.  Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+#    Send only large, multi-packet messages.  Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/usbstorage
+#
+# CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    Defines the number of logical units (LUNs) exported by the USB storage
+#    driver.  Each LUN corresponds to one exported block driver (or partition
+#    of a block driver).  May be 1, 2, or 3.  Default is 1.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+#    The minor device number of the block driver for the first LUN. For
+#    example, N in /dev/mmcsdN.  Used for registering the block driver. Default
+#    is zero.
+# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
+#    The full path to the registered block driver.  Default is "/dev/mmcsd0"
+#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    is 2 or 3.  No defaults.
+#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    is 3.  No defaults.
+#
+#  If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
+#  the example code will also manage the USB trace output.  The amount of trace output
+#  can be controlled using:
+#
+#  CONFIG_EXAMPLES_USBSTRG_TRACEINIT
+#    Show initialization events
+#  CONFIG_EXAMPLES_USBSTRG_TRACECLASS
+#    Show class driver events
+#  CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
+#    Show data transfer events
+#  CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
+#    Show controller events
+#  CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
+#    Show interrupt-related events.
+#
+CONFIG_EXAMPLES_USBSTRG_NLUNS=1
+CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
+CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
+CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
+CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the PIC32MX which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/ld.script b/nuttx/configs/pcblogic-pic32mx/ostest/ld.script
new file mode 100644
index 0000000000..e6f11f50bd
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/ostest/ld.script
@@ -0,0 +1,107 @@
+/****************************************************************************
+ * configs/pcblogic-pic32mx/ostest/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The PIC32MX460F512L has 512Kb of FLASH beginning at KSEG0 address
+ * 0x9d00:0000 and 32Kb of SRAM at KSEG0 address 0x8000:0000.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x9d000000, LENGTH = 512K
+    sram (rwx) : ORIGIN = 0x80000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(mips)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} >sram
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} >sram
+	__exidx_end = ABSOLUTE(.);
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/setenv.sh b/nuttx/configs/pcblogic-pic32mx/ostest/setenv.sh
new file mode 100755
index 0000000000..4302e83b78
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/ostest/setenv.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# configs/pcblogic-pic32mx/ostest/setenv.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+
+# This the Cygwin path to the location where I installed the MicroChip
+# PIC32MX toolchain under windows.  This is *not* the default install
+# location so you will probably have to edit this.  You will also have
+# to edit this if you install a different version of if you install
+# the Linux PIC32MX toolchain as well
+export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/pcblogic-pic32mx/src/Makefile b/nuttx/configs/pcblogic-pic32mx/src/Makefile
new file mode 100755
index 0000000000..42301c59cb
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/src/Makefile
@@ -0,0 +1,88 @@
+############################################################################
+# configs/pcblogic-pic32mx/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+CSRCS		= up_boot.c
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS		+= up_leds.c
+endif
+
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/mips32}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/mips32
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@rm -f libboard$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/configs/pcblogic-pic32mx/src/pcblogic-internal.h b/nuttx/configs/pcblogic-pic32mx/src/pcblogic-internal.h
new file mode 100755
index 0000000000..491a65d75e
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/src/pcblogic-internal.h
@@ -0,0 +1,101 @@
+/****************************************************************************

+ * configs/pcblogic-pic32mx/src/pcblogic-internal.h

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+#ifndef __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H

+#define __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H

+

+/****************************************************************************

+ * Included Files

+ ****************************************************************************/

+

+#include <nuttx/config.h>

+

+/****************************************************************************

+ * Pre-Processor Definitions

+ ****************************************************************************/

+/* Configuration ************************************************************/

+

+/****************************************************************************

+ * Public Types

+ ****************************************************************************/

+

+#ifndef __ASSEMBLY__

+

+/****************************************************************************

+ * Inline Functions

+ ****************************************************************************/

+

+/****************************************************************************

+ * Public Function Prototypes

+ ****************************************************************************/

+

+#ifdef __cplusplus

+#define EXTERN extern "C"

+extern "C" {

+#else

+#define EXTERN extern

+#endif

+

+/************************************************************************************

+ * Name: pic32mx_spiinitialize

+ *

+ * Description:

+ *   Called to configure SPI chip select GPIO pins for the PCB Logic board.

+ *

+ ************************************************************************************/

+

+#if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)

+EXTERN void weak_function pic32mx_spiinitialize(void);

+#endif

+

+/************************************************************************************

+ * Name: pic32mx_ledinit

+ *

+ * Description:

+ *   Configure on-board LEDs if LED support has been selected.

+ *

+ ************************************************************************************/

+

+#ifdef CONFIG_ARCH_LEDS

+EXTERN void pic32mx_ledinit(void);

+#endif

+

+#undef EXTERN

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* __ASSEMBLY__ */

+#endif /* __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H */

diff --git a/nuttx/configs/pcblogic-pic32mx/src/up_boot.c b/nuttx/configs/pcblogic-pic32mx/src/up_boot.c
new file mode 100755
index 0000000000..5a7d284068
--- /dev/null
+++ b/nuttx/configs/pcblogic-pic32mx/src/up_boot.c
@@ -0,0 +1,93 @@
+/************************************************************************************
+ * configs/pcblogic-pic32mx/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "pic32mx-internal.h"
+#include "pcblogic-internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: pic32mx_boardinitialize
+ *
+ * Description:
+ *   All PIC32MX architectures must provide the following entry point.  This entry
+ *   point is called early in the intitialization -- after all memory has been
+ *   configured and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void pic32mx_boardinitialize(void)
+{
+  /* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
+   * function pic32mx_spiinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
+  if (pic32mx_spiinitialize)
+    {
+      pic32mx_spiinitialize();
+    }
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  pic32mx_ledinit();
+#endif
+}