All lm3s6965-ek configurations converted to use kconfig-frontends

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5470 42af7a65-404d-4744-a932-0658087f49c3

9 files changed, 1678 insertions, 952 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 9fd5619fdd..7f2bda4579 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -3849,4 +3849,6 @@
 	  configuration.
 	* configs/stm32f4discovery/src and nuttx/drivers/lcd/ug-2864hsweg01.c:
 	  Updates and correctinos for the UG-2864HSWEG01 from Darcy Gong.
+	* configs/lm326965-ek:  All configurations converted to use the
+	  kconfig-frontends configuration tool.
 
diff --git a/nuttx/arch/arm/src/lm3s/Kconfig b/nuttx/arch/arm/src/lm3s/Kconfig
index 469ff1fc91..aaf8342fa6 100644
--- a/nuttx/arch/arm/src/lm3s/Kconfig
+++ b/nuttx/arch/arm/src/lm3s/Kconfig
@@ -12,6 +12,7 @@ choice
 
 config ARCH_CHIP_LM3S6918
 	bool "LM3S6918"
+	select LM3S_HAVE_SSI1
 
 config ARCH_CHIP_LM3S9B96
 	bool "LM3S9B96"
@@ -27,33 +28,172 @@ config ARCH_CHIP_LM3S8962
 
 endchoice
 
+config LM3S_HAVE_SSI1
+	bool
+
+config LM3S_REVA2
+	bool "Rev A2"
+	default n
+	---help---
+		Some early silicon returned an increase LDO voltage or 2.75V to work
+		around a PLL bug
+
 config LM3S_DFU
 	bool "DFU"
 	default y
 
+menu "Select LM3S Peripheral Support"
+
+config LM3S_UART0
+	bool "UART0"
+	select ARCH_HAVE_UART0
+	default n
+
+config LM3S_UART1
+	bool "UART1"
+	select ARCH_HAVE_UART1
+	default n
+
+config SSI0_DISABLE
+	bool "Disable SSI0"
+	default y
+
+config SSI1_DISABLE
+	bool "Disable SSI1"
+	default y
+
+config LM3S_UART2
+	bool "UART2"
+	select ARCH_HAVE_UART2
+	default n
+
+config LM3S_ETHERNET
+	bool "LM3S Ethernet"
+	default n
+	---help---
+		This must be set (along with NET) to build the LM3S Ethernet driver.
+
+endmenu
+
+menu "Disable GPIO Interrupts"
+
 config LM3S_DISABLE_GPIOA_IRQS
 	bool "Disable GPIOA IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOB_IRQS
 	bool "Disable GPIOB IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOC_IRQS
 	bool "Disable GPIOC IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOD_IRQS
 	bool "Disable GPIOD IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOE_IRQS
 	bool "Disable GPIOE IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOF_IRQS
 	bool "Disable GPIOF IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOG_IRQS
 	bool "Disable GPIOG IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOH_IRQS
 	bool "Disable GPIOH IRQs"
+	default n
 
 config LM3S_DISABLE_GPIOJ_IRQS
 	bool "Disable GPIOJ IRQs"
+	default n
+
+endmenu
+
+if LM3S_ETHERNET
+menu "LM3S Ethernet Configuration"
+
+config LM3S_ETHLEDS
+	bool "Ethernet LEDs"
+	default n
+	---help---
+	Enable to use Ethernet LEDs on the board.
+
+config LM3S_BOARDMAC
+	bool "Board MAC"
+	default n
+	---help---
+		If the board-specific logic can provide a MAC address (via
+		lm3s_ethernetmac()), then this should be selected.
+
+config LM3S_ETHHDUPLEX
+	bool "Force Half Duplex"
+	default n
+	---help---
+		Set to force half duplex operation
+
+config LM3S_ETHNOAUTOCRC
+	bool "Disable auto-CRC"
+	default n
+	---help---
+		Set to suppress auto-CRC generation
+
+config LM3S_ETHNOPAD
+	bool "Disable Tx Padding"
+	default n
+	---help---
+		Set to suppress Tx padding
+
+config LM3S_MULTICAST
+	bool "Enable Multicast"
+	default n
+	---help---
+		Set to enable multicast frames
+
+config LM3S_PROMISCUOUS
+	bool "Enable Promiscuous Mode"
+	default n
+	---help---
+		Set to enable promiscuous mode
+
+config LM3S_TIMESTAMP
+	bool "Enable Timestamping"
+	default n
+
+config LM3S_BADCRC
+	bool "Enable Bad CRC Rejection"
+	default n
+	---help---
+		Set to enable bad CRC rejection.
+
+config M3S_DUMPPACKET
+	bool "Dump Packets"
+	default n
+	---help---
+		Dump each packet received/sent to the console.
+
+endmenu
+endif
+
+if !SSI0_DISABLE || !SSI1_DISABLE
+menu "LM3S SSI Configuration"
+
+config SSI_POLLWAIT
+	bool "Poll Wait (No-Interrupt) Mode"
+	default y
+
+config SSI_TXLIMIT
+	int "Tx Limit"
+	default 4
+	---help---
+		Default of 4 assumes half of the 8 entry FIFO
+
+endmenu
+endif
+
+
diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt
index 1e3aed2d95..09a07ec685 100644
--- a/nuttx/configs/lm3s6965-ek/README.txt
+++ b/nuttx/configs/lm3s6965-ek/README.txt
@@ -478,21 +478,68 @@ Where <subdir> is one of the following:
     Configures the NuttShell (nsh) located at examples/nsh.  The
     Configuration enables both the serial and telnetd NSH interfaces.
 
-    NOTE: As it is configured now, you MUST have a network connected.
-    Otherwise, the NSH prompt will not come up because the Ethernet
-    driver is waiting for the network to come up.  That is probably
-    a bug in the Ethernet driver behavior!
+    NOTES:
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
 
-    Network File System (NFS) support can be added by setting the
-    following in your configuration file:
+       a. Build and install the mconf tool.  See nuttx/README.txt and
+          misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
+
+    3. As it is configured now, you MUST have a network connected.
+       Otherwise, the NSH prompt will not come up because the Ethernet
+       driver is waiting for the network to come up.  That is probably
+       a bug in the Ethernet driver behavior!
+
+    4. Network File System (NFS) support can be added by setting the
+      following in your configuration file:
 
       CONFIG_NFS=y
+
   nx:
     And example using the NuttX graphics system (NX).  This example
     uses the P14201 OLED driver.
 
+    NOTES:
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the mconf tool.  See nuttx/README.txt and
+          misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
+
   ostest:
     This configuration directory, performs a simple OS test using
     examples/ostest.
 
+    NOTES:
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the mconf tool.  See nuttx/README.txt and
+          misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
 
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
diff --git a/nuttx/configs/lm3s6965-ek/nsh/appconfig b/nuttx/configs/lm3s6965-ek/nsh/appconfig
deleted file mode 100644
index 6277056d00..0000000000
--- a/nuttx/configs/lm3s6965-ek/nsh/appconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-############################################################################
-# configs/lm3s6965-ek/nsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-# NSH library
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-# Networking support
-
-ifeq ($(CONFIG_NET),y)
-CONFIGURED_APPS += netutils/uiplib
-CONFIGURED_APPS += netutils/dhcpc
-CONFIGURED_APPS += netutils/resolv
-CONFIGURED_APPS += netutils/tftpc
-CONFIGURED_APPS += netutils/webclient
-ifeq ($(CONFIG_NSH_TELNET),y)
-CONFIGURED_APPS += netutils/telnetd
-endif
-endif
-
-
diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig
index 7b75178eab..84651012d6 100755
--- a/nuttx/configs/lm3s6965-ek/nsh/defconfig
+++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig
@@ -1,214 +1,232 @@
-############################################################################
-# configs/lm3s6965-ek/nsh/defconfig
-#
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+CONFIG_ARCH_CHIP_LM3S=y
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="lm3s"
-CONFIG_ARCH_CHIP_LM3S=y
-CONFIG_ARCH_CHIP_LM3S6965=y
-CONFIG_ARCH_BOARD="lm3s6965-ek"
-CONFIG_ARCH_BOARD_LM3S6965EK=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
 CONFIG_BOARD_LOOPSPERMSEC=4531
-CONFIG_DRAM_SIZE=65536
-CONFIG_DRAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_CALIBRATION=n
+# CONFIG_ARCH_CALIBRATION is not set
 
 #
-# Identify toolchain and linker options
+# ARMV7M Configuration Options
+#
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
+
 #
-CONFIG_LM3S_CODESOURCERYW=n
-CONFIG_LM3S_CODESOURCERYL=n
-CONFIG_LM3S_DEVKITARM=n
-CONFIG_LM3S_BUILDROOT=y
+# LM3S Configuration Options
+#
+# CONFIG_ARCH_CHIP_LM3S6918 is not set
+# CONFIG_ARCH_CHIP_LM3S9B96 is not set
+# CONFIG_ARCH_CHIP_LM3S6432 is not set
+CONFIG_ARCH_CHIP_LM3S6965=y
+# CONFIG_ARCH_CHIP_LM3S8962 is not set
+# CONFIG_LM3S_REVA2 is not set
 CONFIG_LM3S_DFU=y
 
 #
-# Disable support for interrupts on GPIOH and GPIOJ which do not
-# exist on the LM3S6B96.  Additional interrupt support can be
-# disabled if desired to reduce memory footprint.
-CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOC_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOD_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOE_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOF_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOG_IRQS=n
+# Select LM3S Peripheral Support
+#
+CONFIG_LM3S_UART0=y
+# CONFIG_LM3S_UART1 is not set
+# CONFIG_SSI0_DISABLE is not set
+CONFIG_SSI1_DISABLE=y
+# CONFIG_LM3S_UART2 is not set
+CONFIG_LM3S_ETHERNET=y
+
+#
+# Disable GPIO Interrupts
+#
+# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set
 CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
 CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
 
 #
-# LM3S6965 specific serial device driver settings
-#
-CONFIG_LM3S_UART0=y
-CONFIG_LM3S_UART1=n
-CONFIG_LM3S_UART2=n
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
-CONFIG_UART2_2STOP=0
+# LM3S Ethernet Configuration
+#
+# CONFIG_LM3S_ETHLEDS is not set
+# CONFIG_LM3S_BOARDMAC is not set
+# CONFIG_LM3S_ETHHDUPLEX is not set
+# CONFIG_LM3S_ETHNOAUTOCRC is not set
+# CONFIG_LM3S_ETHNOPAD is not set
+# CONFIG_LM3S_MULTICAST is not set
+# CONFIG_LM3S_PROMISCUOUS is not set
+# CONFIG_LM3S_TIMESTAMP is not set
+# CONFIG_LM3S_BADCRC is not set
+# CONFIG_M3S_DUMPPACKET is not set
 
 #
-# LM3S6965 specific SSI device driver settings
+# LM3S SSI Configuration
 #
-CONFIG_SSI0_DISABLE=n
-CONFIG_SSI1_DISABLE=y
 CONFIG_SSI_POLLWAIT=y
-#CONFIG_SSI_TXLIMIT=4
+CONFIG_SSI_TXLIMIT=4
+# CONFIG_NET_MULTICAST is not set
+# CONFIG_SDIO_DMA is not set
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
 
 #
-# LM3S6965 specific serial device driver settings
+# Architecture Options
 #
-CONFIG_LM3S_ETHERNET=y
-CONFIG_LM3S_ETHLEDS=n
-CONFIG_LM3S_BOARDMAC=n
-CONFIG_LM3S_ETHHDUPLEX=n
-CONFIG_LM3S_ETHNOAUTOCRC=n
-CONFIG_LM3S_ETHNOPAD=n
-CONFIG_LM3S_MULTICAST=n
-CONFIG_LM3S_PROMISCUOUS=n
-CONFIG_LM3S_BADCRC=n
-CONFIG_LM3S_DUMPPACKET=n
-
-#
-# General build options
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
 
 #
-# General OS setup
+# Board Settings
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_NET=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=65536
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_LM3S6965EK=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="lm3s6965-ek"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_MSEC_PER_TICK=10
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2010
 CONFIG_START_MONTH=5
 CONFIG_START_DAY=8
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_ENVIRON is not set
 CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
 # Sizes of configurable things (0 disables)
 #
 CONFIG_MAX_TASKS=16
@@ -217,8 +235,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -226,126 +242,414 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Filesystem configuration
+# Stack and heap information
 #
-CONFIG_FS_FAT=y
-CONFIG_FS_ROMFS=n
-CONFIG_NFS=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Maintain legacy build behavior (revisit)
-#
-
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
 CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
+CONFIG_MMCSD_MMCSUPPORT=y
+CONFIG_MMCSD_HAVECARDDETECT=y
 CONFIG_MMCSD_SPI=y
+CONFIG_MMCSD_SPICLOCK=12500000
 CONFIG_MMCSD_SDIO=y
+# CONFIG_SDIO_MUXBUS is not set
+# CONFIG_MTD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# SPI-based MMC/SD driver
+# UART0 Configuration
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# TCP/IP and UDP support via uIP
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
 #
 CONFIG_NET=y
-CONFIG_NET_IPv6=n
+# CONFIG_NET_NOINTS is not set
+# CONFIG_NET_MULTIBUFFER is not set
+# CONFIG_NET_IPv6 is not set
 CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOCKOPTS=y
 CONFIG_NET_BUFSIZE=562
+# CONFIG_NET_TCPURGDATA is not set
 CONFIG_NET_TCP=y
 CONFIG_NET_TCP_CONNS=8
-CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
-CONFIG_NET_TCPBACKLOG=n
 CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCP_RECVDELAY=0
+# CONFIG_NET_TCPBACKLOG is not set
 CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_UDP_CONNS=8
+# CONFIG_NET_BROADCAST is not set
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_PING=y
-#CONFIG_NET_PINGADDRCONF=0
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
 CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+CONFIG_NET_RECEIVE_WINDOW=562
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
 
 #
-# UIP Network Utilities
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_FS_FAT=y
+# CONFIG_FAT_LCNAMES is not set
+# CONFIG_FAT_LFN is not set
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Helper Functions
+#
+CONFIG_LIB_KBDCODEC=y
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
 
 #
-# Settings for examples/uip
+# Built-In Applications
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_BUILTIN is not set
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WGET is not set
 
 #
-# Settings for examples/ostest
+# Interpreters
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 
 #
-# Settings for apps/nshlib
+# Interpreters
 #
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+CONFIG_NETUTILS_DHCPC=y
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64
 CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
 CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=y
+# CONFIG_NSH_CONDEV is not set
 CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
 CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=y
+# CONFIG_NSH_TELNET_LOGIN is not set
 CONFIG_NSH_IPADDR=0x0a000002
 CONFIG_NSH_DRIPADDR=0x0a000001
 CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_MAX_ROUNDTRIP=20
 
 #
-# Architecture-specific NSH options
+# NxWidgets/NxWM
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Stack and heap information
+# System NSH Add-Ons
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/nuttx/configs/lm3s6965-ek/nx/appconfig b/nuttx/configs/lm3s6965-ek/nx/appconfig
deleted file mode 100644
index 69f92ce3a5..0000000000
--- a/nuttx/configs/lm3s6965-ek/nx/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/lm3s6965-ek/nx/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nx
-
diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig
index bca864013d..5fb666e65b 100755
--- a/nuttx/configs/lm3s6965-ek/nx/defconfig
+++ b/nuttx/configs/lm3s6965-ek/nx/defconfig
@@ -1,220 +1,213 @@
-############################################################################
-# configs/lm3s6965-ek/nx/defconfig
-#
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+CONFIG_ARCH_CHIP_LM3S=y
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="lm3s"
-CONFIG_ARCH_CHIP_LM3S=y
-CONFIG_ARCH_CHIP_LM3S6965=y
-CONFIG_ARCH_BOARD="lm3s6965-ek"
-CONFIG_ARCH_BOARD_LM3S6965EK=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
 CONFIG_BOARD_LOOPSPERMSEC=4531
-CONFIG_DRAM_SIZE=65536
-CONFIG_DRAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_CALIBRATION=n
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# ARMV7M Configuration Options
+#
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
 
 #
-# Identify toolchain and linker options
+# LM3S Configuration Options
 #
-CONFIG_LM3S_CODESOURCERYW=n
-CONFIG_LM3S_CODESOURCERYL=n
-CONFIG_LM3S_DEVKITARM=n
-CONFIG_LM3S_BUILDROOT=y
+# CONFIG_ARCH_CHIP_LM3S6918 is not set
+# CONFIG_ARCH_CHIP_LM3S9B96 is not set
+# CONFIG_ARCH_CHIP_LM3S6432 is not set
+CONFIG_ARCH_CHIP_LM3S6965=y
+# CONFIG_ARCH_CHIP_LM3S8962 is not set
+# CONFIG_LM3S_REVA2 is not set
 CONFIG_LM3S_DFU=y
 
 #
-# Disable support for interrupts on GPIOH and GPIOJ which do not
-# exist on the LM3S6B96.  Additional interrupt support can be
-# disabled if desired to reduce memory footprint.
-CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOC_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOD_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOE_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOF_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOG_IRQS=n
+# Select LM3S Peripheral Support
+#
+CONFIG_LM3S_UART0=y
+# CONFIG_LM3S_UART1 is not set
+# CONFIG_SSI0_DISABLE is not set
+CONFIG_SSI1_DISABLE=y
+# CONFIG_LM3S_UART2 is not set
+# CONFIG_LM3S_ETHERNET is not set
+
+#
+# Disable GPIO Interrupts
+#
+# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set
 CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
 CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
 
 #
-# LM3S6965 specific serial device driver settings
+# LM3S SSI Configuration
 #
-CONFIG_LM3S_UART0=y
-CONFIG_LM3S_UART1=n
-CONFIG_LM3S_UART2=n
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
-CONFIG_UART2_2STOP=0
+CONFIG_SSI_POLLWAIT=y
+CONFIG_SSI_TXLIMIT=4
 
 #
-# LM3S6965 specific SSI device driver settings
+# Architecture Options
 #
-CONFIG_SSI0_DISABLE=n
-CONFIG_SSI1_DISABLE=y
-CONFIG_SSI_POLLWAIT=y
-#CONFIG_SSI_TXLIMIT=4
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
 
 #
-# LM3S6965 specific serial device driver settings
+# Board Settings
 #
-CONFIG_LM3S_ETHERNET=n
-CONFIG_LM3S_ETHLEDS=n
-CONFIG_LM3S_BOARDMAC=y
-CONFIG_LM3S_ETHHDUPLEX=n
-CONFIG_LM3S_ETHNOAUTOCRC=n
-CONFIG_LM3S_ETHNOPAD=n
-CONFIG_LM3S_MULTICAST=n
-CONFIG_LM3S_PROMISCUOUS=n
-CONFIG_LM3S_BADCRC=n
-CONFIG_LM3S_DUMPPACKET=n
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=65536
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
 
 #
-# General build options
+# Boot options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# General SPI interface configuration
+# Board Selection
 #
-CONFIG_SPI_CMDDATA=y
+CONFIG_ARCH_BOARD_LM3S6965EK=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="lm3s6965-ek"
 
 #
-# General OS setup
+# Common Board Options
 #
-CONFIG_USER_ENTRYPOINT="nx_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_LCD_RITDEBUG=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_MSEC_PER_TICK=10
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2010
 CONFIG_START_MONTH=5
 CONFIG_START_DAY=12
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nx_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
 CONFIG_DISABLE_POSIX_TIMERS=y
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_ENVIRON=y
 CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
 # Sizes of configurable things (0 disables)
 #
 CONFIG_MAX_TASKS=16
@@ -223,8 +216,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=12
 CONFIG_NFILE_STREAMS=12
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -232,187 +223,382 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Framebuffer driver options
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Filesystem configuration
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+CONFIG_SPI_CMDDATA=y
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+CONFIG_LCD=y
+# CONFIG_LCD_NOGETRUN is not set
+CONFIG_LCD_MAXCONTRAST=255
+CONFIG_LCD_MAXPOWER=1
+CONFIG_LCD_P14201=y
+CONFIG_P14201_NINTERFACES=1
+CONFIG_P14201_SPIMODE=2
+CONFIG_P14201_FREQUENCY=3500000
+CONFIG_P14201_FRAMEBUFFER=y
+# CONFIG_LCD_NOKIA6100 is not set
+# CONFIG_LCD_UG9664HSWAG01 is not set
+# CONFIG_LCD_UG2864AMBAG01 is not set
+# CONFIG_LCD_SSD1289 is not set
+CONFIG_LCD_LANDSCAPE=y
+# CONFIG_LCD_PORTRAIT is not set
+# CONFIG_LCD_RPORTRAIT is not set
+# CONFIG_LCD_RLANDSCAPE is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
 #
-CONFIG_FS_FAT=n
-CONFIG_FS_ROMFS=n
 
 #
-# Maintain legacy build behavior (revisit)
+# System Logging
 #
+# CONFIG_RAMLOG is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
+#
+# Networking Support
+#
+# CONFIG_NET is not set
 
 #
-# SPI-based MMC/SD driver
+# File Systems
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
 
 #
-# TCP/IP and UDP support via uIP
+# File system configuration
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+# CONFIG_FS_RAMMAP is not set
 
 #
-# UIP Network Utilities
+# System Logging
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# CONFIG_SYSLOG is not set
 
 #
-# Graphics related configuration settings
+# Graphics Support
 #
 CONFIG_NX=y
-CONFIG_NX_MULTIUSER=n
+CONFIG_NX_LCDDRIVER=y
 CONFIG_NX_NPLANES=1
+# CONFIG_NX_WRITEONLY is not set
+
+#
+# Supported Pixel Depths
+#
 CONFIG_NX_DISABLE_1BPP=y
 CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=n
+# CONFIG_NX_DISABLE_4BPP is not set
 CONFIG_NX_DISABLE_8BPP=y
 CONFIG_NX_DISABLE_16BPP=y
 CONFIG_NX_DISABLE_24BPP=y
 CONFIG_NX_DISABLE_32BPP=y
 CONFIG_NX_PACKEDMSFIRST=y
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=255
+
+#
+# Input Devices
+#
 CONFIG_NX_MOUSE=y
 CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=8
-CONFIG_NXTK_BORDERCOLOR2=4
-CONFIG_NXTK_AUTORAISE=n
-CONFIG_NXFONT_SANS23X27=y
+
+#
+# Framed Window Borders
+#
+CONFIG_NXTK_BORDERWIDTH=4
+CONFIG_NXTK_BORDERCOLOR1=0x08
+CONFIG_NXTK_BORDERCOLOR2=0x04
+CONFIG_NXTK_BORDERCOLOR3=0
+# CONFIG_NXTK_AUTORAISE is not set
+
+#
+# Font Selections
+#
 CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
+# CONFIG_NXFONT_MONO5X8 is not set
+# CONFIG_NXFONT_SANS17X22 is not set
+# CONFIG_NXFONT_SANS20X26 is not set
+CONFIG_NXFONT_SANS23X27=y
+# CONFIG_NXFONT_SANS22X29 is not set
+# CONFIG_NXFONT_SANS28X37 is not set
+# CONFIG_NXFONT_SANS39X48 is not set
+# CONFIG_NXFONT_SANS17X23B is not set
+# CONFIG_NXFONT_SANS20X27B is not set
+# CONFIG_NXFONT_SANS22X29B is not set
+# CONFIG_NXFONT_SANS28X37B is not set
+# CONFIG_NXFONT_SANS40X49B is not set
+# CONFIG_NXFONT_SERIF22X29 is not set
+# CONFIG_NXFONT_SERIF29X37 is not set
+# CONFIG_NXFONT_SERIF38X48 is not set
+# CONFIG_NXFONT_SERIF22X28B is not set
+# CONFIG_NXFONT_SERIF27X38B is not set
+# CONFIG_NXFONT_SERIF38X49B is not set
+# CONFIG_NXCONSOLE is not set
 
 #
-# RiT P14201 OLED Driver Configuration
+# NX Multi-user only options
 #
-CONFIG_LCD_P14201=y
-CONFIG_P14201_SPIMODE=2
-CONFIG_P14201_FREQUENCY=3500000
-CONFIG_P14201_NINTERFACES=1
-CONFIG_P14201_FRAMEBUFFER=y
+# CONFIG_NX_MULTIUSER is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
 
 #
-# Settings for examples/uip
+# Binary Formats
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Library Routines
+#
 
 #
-# Settings for examples/ostest
+# Standard C Library Options
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
-# Settings for apps/nshlib
+# Non-standard Helper Functions
 #
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+CONFIG_LIB_KBDCODEC=y
 
 #
-# Architecture-specific NSH options
+# Basic CXX Support
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
 
 #
-# Settings for examples/nx
+# Application Configuration
 #
+
+#
+# Built-In Applications
+#
+# CONFIG_BUILTIN is not set
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+CONFIG_EXAMPLES_NX=y
 CONFIG_EXAMPLES_NX_VPLANE=0
 CONFIG_EXAMPLES_NX_DEVNO=0
-CONFIG_EXAMPLES_NX_BGCOLOR=2
-CONFIG_EXAMPLES_NX_COLOR1=10
-CONFIG_EXAMPLES_NX_COLOR2=12
-CONFIG_EXAMPLES_NX_TBCOLOR=8
-CONFIG_EXAMPLES_NX_FONTCOLOR=0
+# CONFIG_EXAMPLES_NX_DEFAULT_COLORS is not set
+CONFIG_EXAMPLES_NX_BGCOLOR=0x02
+CONFIG_EXAMPLES_NX_COLOR1=0x0a
+CONFIG_EXAMPLES_NX_COLOR2=0x0c
+CONFIG_EXAMPLES_NX_TBCOLOR=0x08
+CONFIG_EXAMPLES_NX_FONTCOLOR=0x00
+CONFIG_EXAMPLES_NX_DEFAULT_FONT=y
 CONFIG_EXAMPLES_NX_BPP=4
-CONFIG_EXAMPLES_NX_RAWWINDOWS=n
-CONFIG_EXAMPLES_NX_STACKSIZE=2048
-CONFIG_EXAMPLES_NX_CLIENTPRIO=80
-CONFIG_EXAMPLES_NX_SERVERPRIO=120
-CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
+# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set
 CONFIG_EXAMPLES_NX_EXTERNINIT=y
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
 
 #
-# Stack and heap information
+# Interpreters
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/nuttx/configs/lm3s6965-ek/ostest/appconfig b/nuttx/configs/lm3s6965-ek/ostest/appconfig
deleted file mode 100644
index dabf1f2b44..0000000000
--- a/nuttx/configs/lm3s6965-ek/ostest/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/lm3s6965-ek/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-
diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig
index fcee444333..d1168ad45a 100755
--- a/nuttx/configs/lm3s6965-ek/ostest/defconfig
+++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig
@@ -1,211 +1,213 @@
-############################################################################
-# configs/lm3s6965-ek/ostest/defconfig
-#
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+CONFIG_ARCH_CHIP_LM3S=y
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="lm3s"
-CONFIG_ARCH_CHIP_LM3S=y
-CONFIG_ARCH_CHIP_LM3S6965=y
-CONFIG_ARCH_BOARD="lm3s6965-ek"
-CONFIG_ARCH_BOARD_LM3S6965EK=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
 CONFIG_BOARD_LOOPSPERMSEC=4531
-CONFIG_DRAM_SIZE=65536
-CONFIG_DRAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_CALIBRATION=n
+# CONFIG_ARCH_CALIBRATION is not set
 
 #
-# Identify toolchain and linker options
+# ARMV7M Configuration Options
 #
-CONFIG_LM3S_CODESOURCERYW=n
-CONFIG_LM3S_CODESOURCERYL=n
-CONFIG_LM3S_DEVKITARM=n
-CONFIG_LM3S_BUILDROOT=y
-CONFIG_LM3S_DFU=y
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
 
 #
-# Disable support for interrupts on GPIOH and GPIOJ which do not
-# exist on the LM3S6B96.  Additional interrupt support can be
-# disabled if desired to reduce memory footprint.
-CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOC_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOD_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOE_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOF_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOG_IRQS=n
-CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
-CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
+# LM3S Configuration Options
+#
+# CONFIG_ARCH_CHIP_LM3S6918 is not set
+# CONFIG_ARCH_CHIP_LM3S9B96 is not set
+# CONFIG_ARCH_CHIP_LM3S6432 is not set
+CONFIG_ARCH_CHIP_LM3S6965=y
+# CONFIG_ARCH_CHIP_LM3S8962 is not set
+# CONFIG_LM3S_REVA2 is not set
+CONFIG_LM3S_DFU=y
 
 #
-# LM3S6965 specific serial device driver settings
+# Select LM3S Peripheral Support
 #
 CONFIG_LM3S_UART0=y
-CONFIG_LM3S_UART1=n
-CONFIG_LM3S_UART2=n
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
-CONFIG_UART2_2STOP=0
+# CONFIG_LM3S_UART1 is not set
+# CONFIG_SSI0_DISABLE is not set
+CONFIG_SSI1_DISABLE=y
+# CONFIG_LM3S_UART2 is not set
+# CONFIG_LM3S_ETHERNET is not set
 
 #
-# LM3S6965 specific SSI device driver settings
+# Disable GPIO Interrupts
 #
-CONFIG_SSI0_DISABLE=n
-CONFIG_SSI1_DISABLE=y
-CONFIG_SSI_POLLWAIT=y
-#CONFIG_SSI_TXLIMIT=4
+# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set
+# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set
+CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
 
 #
-# LM3S6965 specific serial device driver settings
+# LM3S SSI Configuration
 #
-CONFIG_LM3S_ETHERNET=n
-CONFIG_LM3S_ETHLEDS=n
-CONFIG_LM3S_BOARDMAC=y
-CONFIG_LM3S_ETHHDUPLEX=n
-CONFIG_LM3S_ETHNOAUTOCRC=n
-CONFIG_LM3S_ETHNOPAD=n
-CONFIG_LM3S_MULTICAST=n
-CONFIG_LM3S_PROMISCUOUS=n
-CONFIG_LM3S_BADCRC=n
-CONFIG_LM3S_DUMPPACKET=n
+CONFIG_SSI_POLLWAIT=y
+CONFIG_SSI_TXLIMIT=4
+# CONFIG_SDIO_DMA is not set
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
 
 #
-# General build options
+# Architecture Options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
 
 #
-# General OS setup
+# Board Settings
 #
-CONFIG_USER_ENTRYPOINT="ostest_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2010
-CONFIG_START_MONTH=5
-CONFIG_START_DAY=6
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=65536
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Boot options
 #
-# There are certain dependency relationships in these
-# features.
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Board Selection
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
+CONFIG_ARCH_BOARD_LM3S6965EK=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="lm3s6965-ek"
 
 #
-# Misc libc settings
+# Common Board Options
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
 
 #
-# Allow for architecture optimized implementations
+# Board-Specific Options
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
+
+#
+# RTOS Features
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=5
+CONFIG_START_DAY=6
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
 
 #
 # Sizes of configurable things (0 disables)
@@ -216,8 +218,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
@@ -225,123 +225,306 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Filesystem configuration
+# Stack and heap information
 #
-CONFIG_FS_FAT=n
-CONFIG_FS_ROMFS=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Maintain legacy build behavior (revisit)
-#
-
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
 CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
+CONFIG_MMCSD_MMCSUPPORT=y
+CONFIG_MMCSD_HAVECARDDETECT=y
 CONFIG_MMCSD_SPI=y
+CONFIG_MMCSD_SPICLOCK=12500000
 CONFIG_MMCSD_SDIO=y
+# CONFIG_SDIO_MUXBUS is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_MCU_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# SPI-based MMC/SD driver
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
 
 #
-# TCP/IP and UDP support via uIP
+# File system configuration
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+# CONFIG_FS_RAMMAP is not set
 
 #
-# UIP Network Utilities
+# System Logging
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# CONFIG_SYSLOG is not set
 
 #
-# Settings for examples/uip
+# Graphics Support
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_NX is not set
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
 
 #
-# Settings for examples/ostest
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Helper Functions
+#
+CONFIG_LIB_KBDCODEC=y
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+# CONFIG_BUILTIN is not set
+
 #
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
 CONFIG_EXAMPLES_OSTEST_LOOPS=1
 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
 
 #
-# Settings for apps/nshlib
-#
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
+# Interpreters
+#
 
 #
-# Stack and heap information
+# Interpreters
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set