gr-osmosdr - GNU Radio block for interfacing with various radio hardware

Age	Commit message (Collapse)	Author	Files	Lines
2017-04-18	Add support for FreeSRP	Lukas Lao Beyer	1	-0/+1
	This patch adds support for both receiving and transmitting using the FreeSRP. More information on the FreeSRP can be found at: http://freesrp.org The gr-osmosdr blocks added make use of libfreesrp, the library required for interfacing with this device. The libfreesrp source code is freely available at https://github.com/freesrp/libfreesrp Usage example: osmocom_fft -a "freesrp"
2016-01-10	cmake: update component name & update AUTHORS file	Dimitri Stolnikov	1	-0/+1

2015-12-18	redpitaya: add support for Red Pitaya SDR transceiver	Pavel Demin	1	-0/+1
	This patch adds two gr-osmosdr blocks that can be used with the SDR transceiver application available from the Red Pitaya application marketplace: http://bazaar.redpitaya.com These new source and sink blocks are based on the file block with some pieces borrowed from the rtl_tcp block. More details about Red Pitaya SDR transceiver can be found at: http://pavel-demin.github.io/red-pitaya-notes/sdr-transceiver Usage example: osmocom_fft -a "redpitaya=192.168.1.100:1001" Signed-off-by: Pavel Demin <pavel.demin@uclouvain.be>
2015-05-12	updated AUTHORS	Dimitri Stolnikov	1	-0/+2

2013-07-21	bladerf: add support for nuand LLC bladeRF (WIP)	Dimitri Stolnikov	1	-0/+1
	This is based on the original work (https://github.com/Nuand/gr-osmosdr) done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr. The following modifications have been done in this commit: * port to gr-osmosdr master codebase (gr3.7) * moved shared properties to bladerf_common * added & verified IF filter bandwidth setters * set LMS6002D registers with values taken from FAQ 5.27 * print device information (serial/versions) on startup * added fpga= and fw= device arguments to program MCU/FPGA * added bladerf=# dev. arg. to select a specific bladeRF * grc gain field controls RF path VGA for RX/TX * grc BB gain field controls BB path VGA for RX/TX Usage example: osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf" The following RX named gain stages are available: LNA: 0 to 6 dB, in 3dB steps VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB The following TX named gain stages are available: VGA1: -35 to -4 dB, in 1dB steps, BB side VGA2: 0 to 25 dB, in 1dB steps, RF side Thanks a lot to the team of nuand LLC for this major contribution.
2012-05-20	add Steve and Hoernchen to AUTHORS file	Dimitri Stolnikov	1	-0/+2

2012-04-06	initial commit	Dimitri Stolnikov	1	-0/+1