diff options
author | Dimitri Stolnikov <horiz0n@gmx.net> | 2012-05-05 17:40:23 +0200 |
---|---|---|
committer | Dimitri Stolnikov <horiz0n@gmx.net> | 2012-05-05 17:50:21 +0200 |
commit | 0a4b9264a3a9d8d9a8e42887fdfc045f41be3963 (patch) | |
tree | 7276dac44f6c4094dc15cacc6c44c3a663dd0626 /grc | |
parent | 3b6c74807cd5e27da4575fcbf849301d430178c3 (diff) |
rtl_source_c: add buffers argument
Diffstat (limited to 'grc')
-rw-r--r-- | grc/gen_osmosdr_blocks.py | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/grc/gen_osmosdr_blocks.py b/grc/gen_osmosdr_blocks.py index 901d9e4..36cfb73 100644 --- a/grc/gen_osmosdr_blocks.py +++ b/grc/gen_osmosdr_blocks.py @@ -99,6 +99,11 @@ self.\$(id).set_antenna(\$ant$(n), $n) <doc> The OsmoSDR $sourk.title() block: +While primarily being developed for the OsmoSDR hardware, this block also +supports the FunCube Dongle, Ettus UHD, rtl-sdr radios and cfile source. +By using the OsmoSDR block you can take advantage of a common software api in +your application(s) independent of the underlying radio hardware. + Output Type: This parameter controls the data type of the stream in gnuradio. @@ -109,7 +114,7 @@ of devices. If left blank, the first device found will be used. Examples: fcd=0 fcd=1 fcd=2 ... - rtl=0 rtl=1 rtl=2,rtl_xtal=28.80001e6,tuner_xtal=26e6 ... + rtl=0 rtl=1 rtl=2,rtl_xtal=28.80001e6,tuner_xtal=26e6,buffers=64 ... uhd=0|name,mcr=52e6,nchan=2,subdev='\\\\'B:0 A:0'\\\\' ... osmosdr=0|name,mcr=64e6,nchan=5,port=/dev/ttyUSB0 ... file=/path/to/file.ext,freq=428e6,rate=1e6,repeat=true,throttle=true @@ -127,19 +132,20 @@ Freq. Corr.: The frequency correction factor in parts per million (ppm). Leave 0 if unknown. Gain: -Overall gain of the device's signal path. For the gain setting to apply the -manual gain mode must be enabled first for some devices (namely rtlsdr). +Overall gain of the device's signal path. For the new gain value to be applied, +the manual gain mode must be enabled first. Gain Mode: -Chooses between the manual (default) and automatc gain mode where appropriate. +Chooses between the manual (default) and automatic gain mode where appropriate. Currently, only rtlsdr devices support automatic gain mode. Antenna: For devices with only one antenna, this may be left blank. Otherwise, the user should specify one of the possible antenna choices. -See the OsmoSDR manual for more detailed documentation: +See the OsmoSDR project page for more detailed documentation: http://sdr.osmocom.org/trac/ +http://sdr.osmocom.org/trac/wiki/GrOsmoSDR </doc> </block> """ |