path: root/doc/README.misdn

mISDN Channel Driver for Asterisk PBX
======================================


This package contains the mISDN Channel Driver for the Asterisk PBX. It 
supports every mISDN Hardware and provides an interface for asterisk. 

Features: 

* NT and TE mode
* PP and PMP mode
* BRI and PRI (with BNE1 and BN2E1 Cards)
* DTMF Detection in HW+mISDNdsp (much better than asterisks internal!)
* Display Messages to Phones (which support display msg)
* HOLD/RETRIEVE/TRANSFER on ISDN Phones : )
* Screen/ Not Screen User Number
* Basic EchoCancellation 
* Volume Control 
* Crypting with mISDNdsp (Blowfish)
* Data (HDLC) callthrough 
* Data Callin (with app_ptyfork +pppd)
* echo cancellation
* some other

Supported Hardware:

chan_misdn supports any mISDN compatible Hardware. Especially the 1-8 Port
BRI Cards available from http://shop.beronet.com

Overview
--------

- Fast Installation Guide
- Pre-Requisites
- Compilation 
- Installation
- Configuration
- Dial and Options String
- misdn cli commands
- Debugging and sending Bugreports
- Examples
- Known working Configurations
- Known Problems
- Changes


Fast Installation Guide
-----------------------

You have two options on how to install chan_misdn.

(1) Requirements: 
      - mISDN and mISDNuser from jolly (see Pre-Requisites below)
    Installation: 
	  - cd <asterisk-src-dir>/channels/misdn
	  - edit Makefile so that MISDNUSER points to your mISDNuser directory
	  - run 'make'
	  - cd <asterisk-src-dir>
	  - compile and install asterisk via 'make install'

(2) Requirements:
      - Asterisk headers and Kernel headers
    Description:
      The Makefile gets the newest mISDN and mISDNuser Sources from 
	  jollys webpage and the newest release of chan_misdn from beronets 
	  Servers. After that it compiles and installs everything (hopefully).
    Installation:
      - cd /usr/src
      - wget http://www.beronet.com/downloads/install-misdn.tar.gz
	  - tar zxf install-misdn.tar.gz
	  - cd install-misdn
	  - make install


Pre-Requisites
--------------

To compile and install this driver, you'll need at least one mISDN Driver, the
mISDNuser package and the asterisk includes (which will be inside of the
sources). Chan_misdn works with both, the current stable release and the cvs-head version of Asterisk.

To get the mISDN stuff please follow the instructions at
http://www.isdn4linux.de.  Please Note that mISDN works good for the
linux-2.6.x kernels. Some of the mISDN drivers do not compile against the
2.4.x or older kernels, you can patch them, but than you'll get myterius
errors.

 I use Kernels > 2.6.9 and it works perfect. with kernels >= 2.6.10 there is a
very litle bug in hfc_multi.c which causes the module not to compile, it can
be easyly fixed by changenging pci_findsubsys to pci_getsubsys in code.

Ok so far so good, now follow the compilation instructions.

!! Dont forget to create the /dev/mISDN device node.

Compilation 
-----------

!! Be aware, in the actual mISDNuser package theres a bug in the Makefile
!! the compilation stops near iapplication.h, this isn't very important
!! at this step you are ready. 

After you've successfully installed mISDN, mISDNuser and asterisk, you should
modify the Makefile in the chan_misdn source path. There you can tell the
Makefile where to install the driver, sample-conf, and most important where it
can find the linux kernel includes, the mISDNuser package and the asterisk
includes.  If you use the Head-Revision of Asterisk (or at least a newer
version than stable) uncomment the CCFLAGS+=-DASTERISK_STABLE, the stable
version of asterisk is at the moment v1-0-X as cvs tag.

Now you can type in: 

make

This should compile chan_misdn.so, if theres an error check the paths in the
Makefile again.


Installation
------------

After successful compilation of chan_misdn, you should simply type in:

make install 

as privileged user to put chan_misdn.so in the asterisk modules
directory.

You should see a Msg like: "Successfully installed chan_misdn". 
Congratulations. 

Theres a sample init.d script for loading the mISDN modules (mISDN.sample),
simply copy it to /etc/init.d/ and modify it, there you can enter your cards.

!! Forget to use capi together with chan_misdn. 



Configuration
-------------

First of all you must configure the mISDN drivers. Each driver module has got
an options and layermask option, which tells the driver wether to start in
TE,NT, PP or PMP mode (there are lots more please read docs in misdn for
that).

After thinking about the above you'll probably want to configure the
misdn.conf file which resides in the asterisk-config directory.

The misdn.conf file contains a "general" Section, and user sections which
contain misdn port settings and different asterisk contexts.

The general section contains especially a variable named context with which
the default context is set. There is also the very important debug variable
which you can set from the asterisk cli (command line interface) or in this
configfile, bigger numbers will lead to more debug output. Theres also a
tracefile options, which takes a path+filename where debug output is written
to.

The user Sections have names which are unequal to "general". Those sections
contain the ports variable which mean the mISDN Ports. Here you can add
comma-sepperated multiple ports. 

Espacially for TE-Mode Ports there is a msns variable. This variable tells the
chan_misdn driver to listen for incomming calls with the given msns, you can
insert a '*' as single msn, which leads in getting every incomming call (if
you want to share on PMP TE S0 with a asterisk and a phone or isdn card you
should insert here the msns which you'll like to give the asterisk).  Finally
a context variable resides in the user sections, which tells chan_misdn where
to send incomming calls to (extension.conf).

In NT-Mode Ports there is a new option, directly after the port number you can
write ptp, this enables PP Mode for this port, please look at misdn.conf for
an example.

When everything worked you should get the asterisk running.


Dial and Options String
-----------------------

The Dialstring of chan_misdn got more complex, because we added more features,
so the generic dialstring looks like:

mISDN/<port>|g:<group>/<extension>[/<OPTIONSSTRING>]

The Optionsstring looks Like:
:<optchar1><OptParam1>:<optchar2><OptParam2>

the ":" character is the delimeter.

The available Optchars are: 
	d - Send display text on called phone, text is the optparam
	n - don't detect dtmf tones on called channel
	h - make digital outgoing call
	c - make crypted outgoing call, param is keyindex
	e - perform echo cancelation on this channel, takes taps as 
	arguments (32,64,128,256)
	s - send Non Inband DTMF as inband
	vr - rxgain control
	vt - txgain control


chan_misdn registers a new application "misdn_set_opt" when loaded. This 
application takes the Optionsstring as argument. The Syntax is:

misdn_set_opt(<OPTIONSSTRING>)


When you set options in the dialstring, the options are set in the external
channel. When you set options with misdn_set_opt, they are set in the current
incoming channel. So if you like to use static encryption, the scenario looks
as follows:

Phone1 --> * Box 1 --> PSTN_TE 
PSTN_TE --> * Box 2 --> Phone2

The Encryption must be done on the PSTN sides, so the dialplan on the boxes
are:

* Box 1:
exten => _${CRYPT_PREFIX}X.,1,Dial(mISDN/g:outbound/:c1)

* Box 2:
exten => ${CRYPT_MSN},1,misdn_set_opt(:c1)
exten => ${CRYPT_MSN},2,dial(${PHONE2})




misdn cli commands
------------------

At the asterisk cli you can try to type in: 

misdn <tab> <tab>

Now you should see the misdn cli commands: 

- clean
	-> pid 		(cleans a broken call, use with care, leads often
			 to a segmentation fault)
- send
	-> display	(sends a Text Message to a asterisk channel, 
			 this channel must be an misdn channel)
- set
	-> debug	(sets debug level)
- show
	-> config	(shows the configuration options)
	-> channels	(shows the current active misdn channels)
	-> channel	(shows details about the given misdn channels)
	-> stacks	(shows the currend ports, there protocols and states)
	-> fullstacks	(shows the current active and inactive misdn channels)

- restart 
	-> port		(restarts given port (L2 Restart) )

- reload 		(reloads misdn.conf)

You can only use "misdn send display" when a asterisk channel is created and
isdn is in the corect state, correct state means that you have established a
call to another phone (mustnt be isdn though).

Then you use it like this:

misdn send display mISDN/1/101 "Hello World!"

where 1 is the Port of the Card where the phone is plugged in, and 101 is the
msn (callerid) of the Phone to send the text to.



Debugging and sending Bug-Reports
---------------------------------

If you encounter problems, you should set up the debugging flag, usually debug=1 should be enough. the Messages are divided in asterisk and misdn parts. Misdn Debug messages begin with an 'I', asterisk messages begin with an '*', the rest is clear I think. 

Please take a trace of the problem and send this trace via mail to bugs@beronet.com


Examples
--------

here some examples of how to use chan_misdn in the dialplan (extensions.conf): 


[globals]
OUT_PORT=1 ; The physical Port of the Card
OUT_GROUP=ExternE1 ; The Group of Ports defined in misdn.conf

[misdnIn]
exten => _X.,1,Dial(mISDN/${OUT_PORT}/${EXTEN})
exten => _0X.,1,Dial(mISDN/g:${OUT_GROUP}/${EXTEN:1})
exten => _1X.,1,Dial(mISDN/g:${OUT_GROUP}/${EXTEN:1}/:dHello)
exten => _1X.,1,Dial(mISDN/g:${OUT_GROUP}/${EXTEN:1}/:dHello Test:n)

In the last line you will notice the last argument (Hello), this is sended
as Display Message to the Phone.


Known working Configurations
----------------------------

In this Section I'll put working configurations for chan_misdn. Beware It
seems that between Kernel 2.6.3 and Kernel 2.6.8 there were lots of mISDN
Bugs. I use Kernel 2.6.9 now, it works quite ok, Kernel 2.6.10+ has changed
the pci_find_subgsys funktion, so hfc_multi from mISDN doesn't compile against
it, you can just change pci_find_subsys to pci_get_subsys, this works.


- chan_misdn-0.0.3-rc1: 	
	* linux-kernel >= 2.6.3 (but at least 2.6) 
	* asterisk >= v1-0 
	* mISDN/mISDNuser since September/04

- chan_misdn-0.0.3-rc3: 	
	* linux-kernel >= 2.6.3 (but at least 2.6) 
	* asterisk >= v1-0.2 
	* mISDN/mISDNuser since December/04

- chan_misdn-0.0.3-rc4: 	
	* linux-kernel >= 2.6.8 (but at least 2.6) 
	* asterisk >= v1-0.2 
	* mISDN/mISDNuser head on cvs.isdn4linux.de

- chan_misdn-0.0.3-rc6: 	
	* linux-kernel >= 2.6.8 (but at least 2.6) 
	* asterisk >= v1-0.2 
	* mISDN/mISDNuser head on cvs.isdn4linux.de

- chan_misdn-0.1.0
	* linux-kernel >= 2.6.8 (but at least 2.6) 
	* asterisk >= v1-0.2 , also CVS Head
	* mISDN/mISDNuser (3.0-beta) from isdn.jolly.de


Known Problems
--------------

* When I use mISDN->IAX I cannot make Trunk calls

-> You need to use ztdummy as dummy zaptel interface for the iax timing in
trunking mode, simply grab libpri, zaptel and compile them (i think you need
to modify the makefile in zaptel to add ztdummy to the defaultly compiled
modules) then modprobe ztdummy, this resolves the problem.


* I cannot hear any tone after succesfull CONNECT to other end

-> you forgot to load mISDNdsp, which is now needed by chan_misdn for switching
and dtmf tone detection

* I have strange ISDN behavior: sometimes I hear the other end, sometimes
not. also i get STATUS Events with cause 100, with misdn debugging

-> Please update to newest version of chan_misdn and set the te_choose_channel
option in misdn.conf to yes

Changes
-------

in the Changes File