blob: 0325eba481c108979ad65e79a537447504d9ff9e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
; Asterisk SMDI configuration
[interfaces]
; Specify serial ports to listen for SMDI messages on below. These will be
; referenced later in zapata.conf. If you do not specify any interfaces then
; SMDI will be disabled. Interfaces can have several different attributes
; associated with them.
; Set the number of stop bits to use per character here. The default is no,
; in which case one stop bit will be used.
;twostopbits = no
; Character size or bit length is the size of each character sent across the
; link. Character size can be 7 or 8. The default is 7.
;charsize = 7
; If you need parity checking enabled you can turn it on here. Acceptable
; values are even, odd, and none. The default is even.
;paritybit = even
; The baudrate to use for this port. Acceptable values are 1200, 2400, 4800,
; and 9600. The default is 9600.
;baudrate = 1200
; Often the numbering scheme for a set of mailboxes or extensions will not be 7
; or 10 digits (as SMDI requires). Use the msdstrip option to strip unused
; digits from the start of numbers.
;msdstrip = 0
; Occasionally Asterisk and the SMDI switch may become out of sync. If this
; happens, Asterisk will appear one or several calls behind as it processes
; voicemail requests. To prevent this from happening, adjust the msgexpirytime.
; This will make Asterisk discard old SMDI messages that have not yet been
; processed. The default expiry time is 30000 milliseconds.
;msgexpirytime = 30000
;smdiport => /dev/ttyS0
|
