1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
;
; SIP Configuration for Asterisk
;
; Syntax for specifying a SIP device in extensions.conf is
; SIP/devicename where devicename is defined in a section below.
;
; You may also use
; SIP/username@domain to call any SIP user on the Internet
; (Don't forget to enable DNS SRV records if you want to use this)
;
; If you define a SIP proxy as a peer below, you may call
; SIP/proxyhostname/user or SIP/user@proxyhostname
; where the proxyhostname is defined in a section below
;
; Useful CLI commands to check peers/users:
; sip show peers Show all SIP peers (including friends)
; sip show users Show all SIP users (including friends)
; sip show registry Show status of hosts we register with
;
; sip debug Show all SIP messages
;
[general]
port = 5060 ; Port to bind to
bindaddr = 0.0.0.0 ; Address to bind SIP channel to
context = default ; Default context for incoming calls
;srvlookup = yes ; Enable DNS SRV lookups on outbound calls
;pedantic = yes ; Enable slow, pedantic checking for Pingtel
;tos=lowdelay ; IP QoS parameter, either keyword or value
;maxexpirey=3600 ; Max length of incoming registration we allow
;defaultexpirey=120 ; Default length of incoming/outoing registration
;notifymimetype=text/plain ; Allow overriding of mime type in NOTIFY
;videosupport=yes ; Turn on support for SIP video
;disallow=all ; Disallow all codecs
;allow=ulaw ; Allow codecs in order of preference
;allow=ilbc
; Asterisk can register as a SIP user agent to a SIP proxy (provider)
; Format for the register statement is:
; register => user[:secret[:authuser]]@host[:port][/extension]
;
; If no extension is given, the 's' extension is used. The extension
; needs to be defined in extensions.conf to be able to accept calls
; from this SIP proxy (provider)
;
; host is either a host name defined in DNS or the name of a
; section defined below.
;
; Examples:
,
;register => 1234:password@mysipprovider.com
; Will call to the 's' extension
;
;register => 2345@mysipprovider.com/1234
;
; Register 2345 at sip provider. Calls from this provider connect to local
; extension 1234 in extensions.conf default context, unless you define
; [mysipprovider.com] in a section below, and configure a context
;externip = 200.201.202.203 ; Address that we're going to put in outbound SIP messages
; if we're behind a NAT
;localnet = 192.168.1.0 ; Internet NETWORK address
;localmask = 255.255.255.0 ; Internet netmask
; The externip, localnet and localmask is used
; when registering and communication with other proxies
; that we're registered with
;[snomsip]
;type=friend
;secret=blah
;host=dynamic
;dtmfmode=inband ; Choices are inband, rfc2833, or info
;defaultip=192.168.0.59
;mailbox=1234,2345 ; Mailbox for message waiting indicator
;restrictcid=yes ; To have the callerid restriced -> sent as ANI
;[pingtel]
;type=friend
;username=pingtel
;secret=blah
;host=dynamic
;qualify=1000 ; Consider it down if it's 1 second to reply
; Helps with NAT session
; qualify=yes uses default value
;callgroup=1,3-4
;pickupgroup=1,3-4
;defaultip=192.168.0.60
;[cisco]
;type=friend
;username=cisco
;secret=blah
;nat=yes ; This phone may be natted
; Use IP address that packet is received from
; instead of trusting SIP headers
;host=dynamic
;canreinvite=no ; Asterisk by default tries to redirect the
; RTP media stream (audio) to go directly from
; the caller to the callee. Some devices do not
; support this (especially if one of them is
; behind a NAT).
;qualify=200 ; Qualify peer is no more than 200ms away
;defaultip=192.168.0.4
;[cisco1]
;type=friend
;username=cisco1
;fromuser=markster ; Specify user to put in "from" instead of callerid
;fromdomain=yourdomain.com ; Specify domain to put in "from" instead of callerid
; fromuser and fromdomain are used when Asterisk
; places calls to this account. It is not used for
; calls from this account.
;secret=blah
;host=dynamic
;defaultip=192.168.0.4
;amaflags=default ; Choices are default, omit, billing, documentation
;accountcode=markster ; Users may be associated with an accountcode to ease billing
|
