aboutsummaryrefslogtreecommitdiffstats
path: root/configs/sip.conf.sample
blob: f3fc8758031911809c5f4e027d75947b8d353c48 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
;
; SIP Configuration for Asterisk
;
; Syntax for specifying a SIP device in extensions.conf is
; SIP/devicename where devicename is defined in a section below.
;
; You may also use 
; SIP/username@domain to call any SIP user on the Internet
; (Don't forget to enable DNS SRV records if you want to use this)
; 
; If you define a SIP proxy as a peer below, you may call
; SIP/proxyhostname/user or SIP/user@proxyhostname 
; where the proxyhostname is defined in a section below 
; 
; Useful CLI commands to check peers/users:
;   sip show peers		Show all SIP peers (including friends)
;   sip show users		Show all SIP users (including friends)
;   sip show registry		Show status of hosts we register with
;
;   sip debug			Show all SIP messages
;

[general]
context=default			; Default context for incoming calls
;recordhistory=yes		; Record SIP history by default 
				; (see sip history / sip no history)
;realm=mydomain.tld		; Realm for digest authentication
				; defaults to "asterisk"
				; Realms MUST be globally unique according to RFC 3261
				; Set this to your host name or domain name
port=5060			; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0		; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes			; Enable DNS SRV lookups on outbound calls
				; Note: Asterisk only uses the first host 
				; in SRV records
				; Disabling DNS SRV lookups disables the 
				; ability to place SIP calls based on domain 
				; names to some other SIP users on the Internet
				
;pedantic=yes			; Enable slow, pedantic checking for Pingtel
				; and multiline formatted headers for strict
				; SIP compatibility (defaults to "no")
;tos=184                        ; Set IP QoS to either a keyword or numeric val
;tos=lowdelay                   ; lowdelay,throughput,reliability,mincost,none
;maxexpirey=3600		; Max length of incoming registration we allow
;defaultexpirey=120		; Default length of incoming/outoing registration
;notifymimetype=text/plain	; Allow overriding of mime type in MWI NOTIFY
;videosupport=yes		; Turn on support for SIP video

;disallow=all			; First disallow all codecs
;allow=ulaw			; Allow codecs in order of preference
;allow=ilbc			; Note: codec order is respected only in [general]
;musicclass=default		; Sets the default music on hold class for all SIP calls
				; This may also be set for individual users/peers
;language=en			; Default language setting for all users/peers
				; This may also be set for individual users/peers
;relaxdtmf=yes			; Relax dtmf handling
;rtptimeout=60			; Terminate call if 60 seconds of no RTP activity
				; when we're not on hold
;rtpholdtimeout=300		; Terminate call if 300 seconds of no RTP activity
				; when we're on hold (must be > rtptimeout)
;trustrpid = no			; If Remote-Party-ID should be trusted
;progressinband=no		; If we should generate in-band ringing always
;useragent=Asterisk PBX		; Allows you to change the user agent string
;nat=no				; NAT settings 
                                ; yes = Always ignore info and assume NAT
                                ; no = Use NAT mode only according to RFC3581 
                                ; never = Never attempt NAT mode or RFC3581 support
				; route = Assume NAT, don't send rport (work around more UNIDEN bugs)
;promiscredir = no      ; If yes, allows 302 or REDIR to non-local SIP address
;                       ; Note that promiscredir when redirects are made to the
;                       ; local system will cause loops since SIP is incapable
;                       ; of performing a "hairpin" call.
;
; If regcontext is specified, Asterisk will dynamically 
; create and destroy a NoOp priority 1 extension for a given
; peer who registers or unregisters with us.  The actual extension
; is the 'regexten' parameter of the registering peer or its
; name if 'regexten' is not provided.  More than one regexten may be supplied
; if they are separated by '&'.  Patterns may be used in regexten.
;
;regcontext=iaxregistrations
;
; Asterisk can register as a SIP user agent to a SIP proxy (provider)
; Format for the register statement is:
;       register => user[:secret[:authuser]]@host[:port][/extension]
;
; If no extension is given, the 's' extension is used. The extension
; needs to be defined in extensions.conf to be able to accept calls
; from this SIP proxy (provider)
;
; host is either a host name defined in DNS or the name of a 
; section defined below.
;
; Examples:
;
;register => 1234:password@mysipprovider.com	
;
;     This will pass incoming calls to the 's' extension
;
;
;register => 2345:password@sip_proxy/1234
;
;    Register 2345 at sip provider 'sip_proxy'.  Calls from this provider connect to local 
;    extension 1234 in extensions.conf default context, unless you define 
;    unless you configure a [sip_proxy] section below, and configure a context.
;	 Tip 1: Avoid assigning hostname to a sip.conf section like [provider.com]
;        Tip 2: Use separate type=peer and type=user sections for SIP providers
;                      (instead of type=friend) if you have calls in both directions
  

;externip = 200.201.202.203	; Address that we're going to put in outbound SIP messages
				; if we're behind a NAT

				; The externip and localnet is used
				; when registering and communicating with other proxies
				; that we're registered with
				; You may add multiple local networks.  A reasonable set of defaults
				; are:
;localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks
;localnet=10.0.0.0/255.0.0.0	; Also RFC1918
;localnet=172.16.0.0/12		; Another RFC1918 with CIDR notation
;localnet=169.254.0.0/255.255.0.0 ;Zero conf local network

;-----------------------------------------------------------------------------------
; Users and peers have different settings available. Friends have all settings,
; since a friend is both a peer and a user
;
; User config options:        Peer configuration:
; --------------------        -------------------
; context                     context
; permit                      permit
; deny                        deny
; secret                      secret
; md5secret                   md5secret
; dtmfmode                    dtmfmode
; canreinvite                 canreinvite
; nat                         nat
; callgroup                   callgroup
; pickupgroup                 pickupgroup
; language                    language
; allow                       allow
; disallow                    disallow
; insecure                    insecure
; trustrpid                   trustrpid
; progressinband              progressinband
; promiscredir                promiscredir
; callerid
; accountcode
; amaflags
; incominglimit
; restrictcid
;                             mailbox
;                             username
;                             template
;                             fromdomain
;                             regexten
;                             fromuser
;                             host
;                             mask
;                             port
;                             qualify
;                             defaultip
;                             rtptimeout
;                             rtpholdtimeout

;[sip_proxy]
; For incoming calls only. Example: FWD (Free World Dialup)
;type=user
;context=from-fwd

;[sip_proxy-out]
;type=peer          		; we only want to call out, not be called
;secret=guessit
;username=yourusername		; Authentication user for outbound proxies
;fromuser=yourusername		; Many SIP providers require this!
;host=box.provider.com

;[grandstream1]
;type=friend 			; either "friend" (peer+user), "peer" or "user"
;context=from-sip
;fromuser=grandstream1		; overrides the callerid, e.g. required by FWD
;callerid=John Doe <1234>
;host=192.168.0.23		; we have a static but private IP address
;nat=no				; there is not NAT between phone and Asterisk
;canreinvite=yes		; allow RTP voice traffic to bypass Asterisk
;dtmfmode=info			; either RFC2833 or INFO for the BudgeTone
;incominglimit=1		; permit only 1 outgoing call at a time
				; from the phone to asterisk
;mailbox=1234@default  ; mailbox 1234 in voicemail context "default"
;disallow=all			; need to disallow=all before we can use allow=
;allow=ulaw			; Note: In user sections the order of codecs
				; listed with allow= does NOT matter!
;allow=alaw
;allow=g723.1			; Asterisk only supports g723.1 pass-thru!
;allow=g729			; Pass-thru only unless g729 license obtained


;[xlite1]
;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)!
;Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
;type=friend
;regexten=1234                 ; When they register, create extension 1234
;username=xlite1
;callerid="Jane Smith" <5678>
;host=dynamic
;nat=yes                       ; X-Lite is behind a NAT router
;canreinvite=no                ; Typically set to NO if behind NAT
;disallow=all
;allow=gsm                     ; GSM consumes far less bandwidth than ulaw
;allow=ulaw
;allow=alaw


;[snom]
;type=friend			; Friends place calls and receive calls
;context=from-sip		; Context for incoming calls from this user
;secret=blah
;language=de			; Use German prompts for this user 
;host=dynamic			; This peer register with us
;dtmfmode=inband		; Choices are inband, rfc2833, or info
;defaultip=192.168.0.59		; IP used until peer registers
;username=snom			; Username to use in INVITE until peer registers
;mailbox=1234,2345		; Mailboxes for message waiting indicator
;restrictcid=yes		; To have the callerid restriced -> sent as ANI
;disallow=all
;allow=ulaw                     ; dtmfmode=inband only works with ulaw or alaw!
;mailbox=1234@context,2345      ; Mailbox(-es) for message waiting indicator


;[polycom]
;type=friend			; Friends place calls and receive calls
;context=from-sip		; Context for incoming calls from this user
;secret=blahpoly
;host=dynamic			; This peer register with us
;dtmfmode=rfc2833		; Choices are inband, rfc2833, or info
;username=polly			; Username to use in INVITE until peer registers
;disallow=all
;allow=ulaw                     ; dtmfmode=inband only works with ulaw or alaw!
;progressinband=no		; Polycom phones don't work properly with "never"


;[pingtel]
;type=friend
;username=pingtel
;secret=blah
;host=dynamic
;insecure=yes			; To match a peer based by IP address only and not peer
;insecure=very			; To allow registered hosts to call without re-authenticating
;qualify=1000			; Consider it down if it's 1 second to reply
				; Helps with NAT session
				; qualify=yes uses default value
;callgroup=1,3-4		; We are in caller groups 1,3,4
;pickupgroup=1,3-5		; We can do call pick-p for call group 1,3,4,5
;defaultip=192.168.0.60		; IP address to use if peer has not registred

;[cisco1]
;type=friend
;username=cisco1
;secret=blah
;qualify=200			; Qualify peer is no more than 200ms away
;nat=yes			; This phone may be natted
				; Send SIP and RTP to  IP address that packet is 
				; received from instead of trusting SIP headers 
;host=dynamic			; This device registers with us
;canreinvite=no			; Asterisk by default tries to redirect the
				; RTP media stream (audio) to go directly from
				; the caller to the callee.  Some devices do not
				; support this (especially if one of them is 
				; behind a NAT).
;defaultip=192.168.0.4

;[cisco2]
;type=friend
;username=cisco2
;fromuser=markster		; Specify user to put in "from" instead of callerid
;fromdomain=yourdomain.com	; Specify domain to put in "from" instead of callerid
				; fromuser and fromdomain are used when Asterisk
				; places calls to this account.  It is not used for
				; calls from this account.
;secret=blah
;host=dynamic
;defaultip=192.168.0.4
;amaflags=default		; Choices are default, omit, billing, documentation
;accountcode=markster		; Users may be associated with an accountcode to ease billing