1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
; Radio Repeater / Remote Base configuration file (for use with app_rpt)
;
;[000] ; Node ID of first repeater
;rxchannel = Zap/1 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/2 ; Tx audio/signalling channel
;functions = functions-repeater ; DTMF function list
;; specify this for a different function list then local when on link
;;link_functions = functions-different ; DTMF function list for link
;tonezone = us ; use US tones (default)
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
;funcchar = * ; function lead-in character (defaults to '*')
;endchar = # ; command mode end character (defaults to '#')
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
;politeid=30000 ; time in milliseconds before ID timer
; expires to try and ID in the tail.
; (optional, default is 30000).
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively
;[001] ; Node ID of second repeater
;rxchannel = Zap/3 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/4 ; Tx audio/signalling channel
;tonezone = us ; use US tones (default)
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
;funcchar = * ; function lead-in character (defaults to '*')
;endchar = # ; command mode end character (defaults to '#')
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
;politeid=30000 ; time in milliseconds before ID timer
; expires to try and ID in the tail.
; (optional, default is 30000).
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
;[002] ; Node ID of remote base
;rxchannel = Zap/5 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/6 ; Tx audio/signalling channel
;functions = functions-remote
;remote = yes
;iobase = 0x378 ; Specify IO port for parallel port (optional)
;[functions-repeater]
;1=ilink,1 ; Specific link disconnect
;2=ilink,2 ; Specific Link connect - monitor only
;3=ilink,3 ; Specific Link connect - transceive
;4=ilink,4 ; Enter command mode on a specific link
;7=ilink,5 ; Link status
;;XX=ilink,6 ; Disconnect all links (not used here)
;80=status,1 ; System info
;81=status,2 ; Time
;82=status,3 ; app_rpt.c Version
;6=autopatchup ; Autopatch up
;0=autopatchdn ; Autopatch down
;90=cop,1 ; System warm boot
;91=cop,2 ; System enable
;92=cop,3 ; System disable
;[functions-remote]
;0=remote,1 ; Retrieve Memory
;1=remote,2 ; Set freq.
;2=remote,3 ; Set Rx PL tone.
;40=remote,100 ; Rx PL off
;41=remote,101 ; Rx PL on
;42=remote,102 ; Tx PL off
;43=remote,103 ; Tx PL on
;44=remote,104 ; Low Pwr
;45=remote,105 ; Med Pwr
;46=remote,106 ; Hi Pwr
;5=remote,5 ; Status
;[telemetry]
; Telemetry entries are shared across all repeaters
; Can be a tone sequence, morse string, or a file
;
; |t - Tone escape sequence
;
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
; Single frequencies are created by setting freq1 or freq2 to zero.
;
; |m - Morse escape sequence
;
; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
; [morse] section.
;
; Follow with an alphanumeric string
;
; |i - Morse ID escape sequence
;
; Sends Morse code at the ID amplitude and ID frequency as defined in the
; [morse] section.
;
; Follow with an alphanumeric string
;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
;ct2=|t(660,880,150,2048)
;ct3=|t(440,0,150,2048)
;ct4=|t(550,0,150,2048)
;ct5=|t(660,0,150,2048)
;ct6=|t(880,0,150,2048)
;ct7=|t(660,440,150,2048)
;ct8=|t(700,1100,150,2048)
;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048);
;remotemon=|t(1600,0,75,2048)
;cmdmode=|t(900,903,200,2048)
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
;[morse]
;speed=20 ; Approximate speed in WPM
;frequency=800 ; Morse Telemetry Frequency
;amplitude=4096 ; Morse Telemetry Amplitude
;idfrequency=330 ; Morse ID Frequency
;idamplitude=2048 ; Morse ID Amplitude
;[nodes]
;000 = context_A@1.2.3.4/1234
;001 = context_B@5.6.7.8/4321
;of course, you can also specify these with domain names, but why rely
;on DNS working unnecessarily?
;[memory]
;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
;00 = 146.460,100.0,sht
;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
;01 = 146.940,100.0,-l
; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes
; Attributes: l=low power, m=medium power, h=high power, -=minus offset,
; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable
|
