blob: 3cc787e8084242115f95156df5aa876203fa7556 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
; Radio Repeater / Remote Base configuration file (for use with app_rpt)
;
;[000] ; Node ID of first repeater
;rxchannel = Zap/1 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/2 ; Tx audio/signalling channel
;tonezone = us ; use US tones (default)
;simple = no ; Not in "simple" mode
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively
;[001] ; Node ID of second repeater
;rxchannel = Zap/3 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/4 ; Tx audio/signalling channel
;tonezone = us ; use US tones (default)
;simple = no ; Not in "simple" mode
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
;[002] ; Node ID of remote base
;rxchannel = Zap/5 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/6 ; Tx audio/signalling channel
;remote = yes
|