1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
;
; Automatically generated from ../channels/chan_oss.c
;
[general]
; General config options, with default values shown.
; You should use one section per device, with [general] being used
; for the first device and also as a template for other devices.
;
; All but 'debug' can go also in the device-specific sections.
;
; debug = 0x0 ; misc debug flags, default is 0
; Set the device to use for I/O
; device = /dev/dsp
; Optional mixer command to run upon startup (e.g. to set
; volume levels, mutes, etc.
; mixer =
; Software mic volume booster (or attenuator), useful for sound
; cards or microphones with poor sensitivity. The volume level
; is in dB, ranging from -20.0 to +20.0
; boost = n ; mic volume boost in dB
; Set the callerid for outgoing calls
; callerid = John Doe <555-1234>
; autoanswer = no ; no autoanswer on call
; autohangup = yes ; hangup when other party closes
; extension = s ; default extension to call
; context = default ; default context for outgoing calls
; language = "" ; default language
; If you set overridecontext to 'yes', then the whole dial string
; will be interpreted as an extension, which is extremely useful
; to dial SIP, IAX and other extensions which use the '@' character.
; The default is 'no' just for backward compatibility, but the
; suggestion is to change it.
; overridecontext = no ; if 'no', the last @ will start the context
; if 'yes' the whole string is an extension.
; low level device parameters in case you have problems with the
; device driver on your operating system. You should not touch these
; unless you know what you are doing.
; queuesize = 10 ; frames in device driver
; frags = 8 ; argument to SETFRAGMENT
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
; OSS channel. Defaults to "no". An enabled jitterbuffer will
; be used only if the sending side can create and the receiving
; side can not accept jitter. The OSS channel can't accept jitter,
; thus an enabled jitterbuffer on the receive OSS side will always
; be used if the sending side can create jitter.
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
; resynchronized. Useful to improve the quality of the voice, with
; big jumps in/broken timestamps, usually sent from exotic devices
; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of an OSS
; channel. Two implementations are currently available - "fixed"
; (with size always equals to jbmax-size) and "adaptive" (with
; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
[card1]
; device = /dev/dsp1 ; alternate device
|
