;
; Configuration for Shared Line Appearances (SLA).
;

; ---- General Options ----------------
[general]
; There are none!

; -------------------------------------


; ---- Trunk Declarations -------------
;
;[line1]                  ; Provide a name for this trunk.
;type=trunk               ; This line is what marks this entry as a trunk.
;
;device=Zap/3             ; Map this trunk declaration to a specific device.
                          ; NOTE: At this point, this *must* be a zap channel!

;autocontext=line1        ; This supports automatic generation of the dialplan entries 
                          ; if the autocontext option is used.  Each trunk should have 
                          ; a unique context name.  Then, in zapata.conf, this device 
                          ; should be configured to have incoming calls go to this context.

;[line2]
;type=trunk
;device=Zap/4
;autocontext=line2

;[line3]
;type=trunk
;device=Zap/3
;autocontext=line3

;[line4]
;type=trunk
;device=Zap/4
;autocontext=line4
; --------------------------------------


; ---- Station Declarations ------------

;[station](!)                       ; In this example, all stations have the same trunks, so this 
                                    ; configuration template is used to simplify the declaration 
                                    ; of each station.

;type=station                       ; This line indicates that this entry is a station.

;autocontext=sla_stations           ; This supports automatic generation of the dialplan entries if 
                                    ; the autocontext option is used.  All stations can use the same 
                                    ; context without conflict.  The device for this station should 
                                    ; have its context configured to the same one listed here.

;trunk=line1                        ; Individually list all of the trunks that will appear on this station.  This
                                    ; order is significant.  It should be the same order as they appear on the
                                    ; phone.  The order here defines the order of preference that the trunks will
                                    ; be used.
;trunk=line2
;trunk=line3
;trunk=line4

;[station1](station)                ; Define a station that uses the configuration from the template "station".
;device=SIP/station1                ; Each station must be mapped to a device.
;
;[station2](station)
;device=SIP/station2
;
;[station3](station)
;device=SIP/station3
;
;[station4](station)
;device=SIP/station4
;
;[station5](station)
;device=SIP/station5
; --------------------------------------