; ; Skinny Configuration for Asterisk ; [general] bindaddr=0.0.0.0 ; Address to bind to bindport=2000 ; Port to bind to, default tcp/2000 dateformat=M-D-Y ; M,D,Y in any order (6 chars max) ; "A" may also be used, but it must be at the end. ; Use M for month, D for day, Y for year, A for 12-hour time. keepalive=120 ;allow=all ; see doc/rtp-packetization for framing options ;disallow= ;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- ;jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a ; skinny channel. Defaults to "no". An enabled jitterbuffer will ; be used only if the sending side can create and the receiving ; side can not accept jitter. The skinny channel can accept ; jitter, thus a jitterbuffer on the receive skinny side will be ; used only if it is forced and enabled. ;jbforce = no ; Forces the use of a jitterbuffer on the receive side of a skinny ; channel. Defaults to "no". ;jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is ; resynchronized. Useful to improve the quality of the voice, with ; big jumps in/broken timestamps, usually sent from exotic devices ; and programs. Defaults to 1000. ;jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a ; skinny channel. Two implementations are currently available ; - "fixed" (with size always equals to jbmaxsize) ; - "adaptive" (with variable size, actually the new jb of IAX2). ; Defaults to fixed. ;jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". ;----------------------------------------------------------------------------------- ;----------------------------------- DEVICE OPTIONS -------------------------------- ;earlyrtp=1 ; whether audio signalling should be provided by asterisk ; (earlyrtp=1) or device generated (earlyrtp=0). ; defaults to earlyrtp=1 ;----------------------------------------------------------------------------------- ; Typical config for 12SP+ ;[florian] ;device=SEP00D0BA847E6B ;version=P002G204 ; Thanks critch ;context=did ;line => 120 ; Dial(Skinny/120@florian) ; Typical config for a 7910 ;[duba] ; Device name ;device=SEP0007EB463101 ; Official identifier ;version=P002F202 ; Firmware version identifier ;host=192.168.1.144 ;permit=192.168.0/24 ; Optional, used for authentication ;nat=yes ;callerid="George W. Bush" <202-456-1414> ;mailbox=500 ;callwaiting=yes ;transfer=yes ;threewaycalling=yes ;context=default ;line => 500 ; Dial(Skinny/500@duba) ;mohinterpret=default ; This option specifies a default music on hold class to ; use when put on hold if the channel's moh class was not ; explicitly set with Set(CHANNEL(musicclass)=whatever) and ; the peer channel did not suggest a class to use. ;mohsuggest=default ; This option specifies which music on hold class to suggest to the peer channel ; when this channel places the peer on hold. It may be specified globally or on ; a per-user or per-peer basis. ; Typical config for a 7940 with dual 7914s ;[support] ;device=SEP0007EB463121 ;nat=yes ;callerid="Customer Support" <810-234-1212> ;mailbox=100 ;context=inbound ;linelabel="Support Line" ; Displays next to the line ; button on 7940's and 7960s ;line => 100 ;callerid="John Chambers" <408-526-4000> ;context=did ;linelabel="John" ;mailbox=110 ;line => 110 ;speeddial => 111,Jack Smith ;speeddial => 112,Bob Peterson ;addon => 7914 ;addon => 7914