; Radio Repeater / Remote Base configuration file (for use with app_rpt)
;

;[000]					; Node ID of first repeater

;rxchannel = Zap/1			; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/2			; Tx audio/signalling channel
;tonezone = us				; use US tones (default)
;simple = no				; Not in "simple" mode
;context = default			; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234>  ; Callerid for phone calls
;idrecording = wb6nil			; id recording
;accountcode=RADIO			; account code (optional)
;hangtime=1000				; squelch tail hang time (in ms) (optional)
;totime=100000				; transmit time-out time (in ms) (optional)
;idtime=30000				; id interval time (in ms) (optional)

; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms),  3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively

;[001]					; Node ID of second repeater

;rxchannel = Zap/3			; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/4			; Tx audio/signalling channel
;tonezone = us				; use US tones (default)
;simple = no				; Not in "simple" mode
;context = default			; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234>  ; Callerid for phone calls
;idrecording = wb6nil			; id recording
;accountcode=RADIO			; account code (optional)
;hangtime=1000				; squelch tail hang time (in ms) (optional)
;totime=100000				; transmit time-out time (in ms) (optional)
;idtime=30000				; id interval time (in ms) (optional)

;[002]					; Node ID of remote base

;rxchannel = Zap/5			; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/6			; Tx audio/signalling channel
;remote = yes