; indications.conf ; Configuration file for location specific tone indications ; used by the pbx_indications module. ; ; NOTE: ; When adding countries to this file, please keep them in alphabetical ; order according to the 2-character country codes! ; ; The [general] category is for certain global variables. ; All other categories are interpreted as location specific indications ; ; [general] country=us ; default location ; [example] ; description = string ; The full name of your country, in English. ; alias = iso[,iso]* ; List of other countries 2-letter iso codes, which have the same ; tone indications. ; ringcadence = num[,num]* ; List of durations the physical bell rings. ; dial = tonelist ; Set of tones to be played when one picks up the hook. ; busy = tonelist ; Set of tones played when the receiving end is busy. ; congestion = tonelist ; Set of tones played when there is some congestion (on the network?) ; callwaiting = tonelist ; Set of tones played when there is a call waiting in the background. ; dialrecall = tonelist ; Not well defined; many phone systems play a recall dial tone after hook ; flash. ; record = tonelist ; Set of tones played when call recording is in progress. ; info = tonelist ; Set of tones played with special information messages (e.g., "number is ; out of service") ; 'name' = tonelist ; Every other variable will be available as a shortcut for the "PlayList" command ; but will not be used automatically by Asterisk. ; ; ; The tonelist itself is defined by a comma-separated sequence of elements. ; Each element consist of a frequency (f) with an optional duration (in ms) ; attached to it (f/duration). The frequency component may be a mixture of two ; frequencies (f1+f2) or a frequency modulated by another frequency (f1*f2). ; The implicit modulation depth is fixed at 90%, though. ; If the list element starts with a !, that element is NOT repeated, ; therefore, only if all elements start with !, the tonelist is time-limited, ; all others will repeat indefinitely. ; ; concisely: ; element = [!]freq[+|*freq2][/duration] ; tonelist = element[,element]* ; ; Please note that SPACES ARE NOT ALLOWED in tone lists! ; [at] description = Austria ringcadence = 1000,5000 ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf dial = 420 busy = 420/400,0/400 ring = 420/1000,0/5000 congestion = 420/200,0/200 callwaiting = 420/40,0/1960 dialrecall = 420 ; RECORDTONE - not specified record = 1400/80,0/14920 info = 950/330,1450/330,1850/330,0/1000 stutter = 380+420 [au] description = Australia ; Reference http://www.acif.org.au/__data/page/3303/S002_2001.pdf ; Normal Ring ringcadence = 400,200,400,2000 ; Distinctive Ring 1 - Forwarded Calls ; 400,400,200,200,400,1400 ; Distinctive Ring 2 - Selective Ring 2 + Operator + Recall ; 400,400,200,2000 ; Distinctive Ring 3 - Multiple Subscriber Number 1 ; 200,200,400,2200 ; Distinctive Ring 4 - Selective Ring 1 + Centrex ; 400,2600 ; Distinctive Ring 5 - Selective Ring 3 ; 400,400,200,400,200,1400 ; Distinctive Ring 6 - Multiple Subscriber Number 2 ; 200,400,200,200,400,1600 ; Distinctive Ring 7 - Multiple Subscriber Number 3 + Data Privacy ; 200,400,200,400,200,1600 ; Tones dial = 413+438 busy = 425/375,0/375 ring = 413+438/400,0/200,413+438/400,0/2000 ; XXX Congestion: Should reduce by 10 db every other cadence XXX congestion = 425/375,0/375,420/375,0/375 callwaiting = 425/200,0/200,425/200,0/4400 dialrecall = 413+438 ; Record tone used for Call Intrusion/Recording or Conference record = !425/1000,!0/15000,425/360,0/15000 info = 425/2500,0/500 ; Other Australian Tones ; The STD "pips" indicate the call is not an untimed local call std = !525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100 ; Facility confirmation tone (eg. Call Forward Activated) facility = 425 ; Message Waiting "stutter" dialtone stutter = 413+438/100,0/40 ; Ringtone for calls to Telstra mobiles ringmobile = 400+450/400,0/200,400+450/400,0/2000 [br] description = Brazil ringcadence = 1000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/4000 congestion = 425/250,0/250,425/750,0/250 callwaiting = 425/50,0/1000 ; Dialrecall not used in Brazil standard (using UK standard) dialrecall = 350+440 ; Record tone is not used in Brazil, use busy tone record = 425/250,0/250 ; Info not used in Brazil standard (using UK standard) info = 950/330,1400/330,1800/330 stutter = 350+440 [be] description = Belgium ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,3000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/3000 congestion = 425/167,0/167 callwaiting = 1400/175,0/175,1400/175,0/3500 ; DIALRECALL - not specified dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" ; RECORDTONE - not specified record = 1400/500,0/15000 info = 900/330,1400/330,1800/330,0/1000 stutter = 425/1000,0/250 [ch] description = Switzerland ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/200,0/200,425/200,0/4000 ; DIALRECALL - not specified dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 ; RECORDTONE - not specified record = 1400/80,0/15000 info = 950/330,1400/330,1800/330,0/1000 stutter = 425+340/1100,0/1100 [cl] description = Chile ; According to specs from Telefonica CTC Chile ringcadence = 1000,3000 dial = 400 busy = 400/500,0/500 ring = 400/1000,0/3000 congestion = 400/200,0/200 callwaiting = 400/250,0/8750 dialrecall = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 record = 1400/500,0/15000 info = 950/333,1400/333,1800/333,0/1000 stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 [cn] description = China ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 450 busy = 450/350,0/350 ring = 450/1000,0/4000 congestion = 450/700,0/700 callwaiting = 450/400,0/4000 dialrecall = 450 record = 950/400,0/10000 info = 450/100,0/100,450/100,0/100,450/100,0/100,450/400,0/400 ; STUTTER - not specified stutter = 450+425 [cz] description = Czech Republic ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425/330,0/330,425/660,0/660 busy = 425/330,0/330 ring = 425/1000,0/4000 congestion = 425/165,0/165 callwaiting = 425/330,0/9000 ; DIALRECALL - not specified dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425/330,0/330,425/660,0/660 ; RECORDTONE - not specified record = 1400/500,0/14000 info = 950/330,0/30,1400/330,0/30,1800/330,0/1000 ; STUTTER - not specified stutter = 425/450,0/50 [de] description = Germany ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425 busy = 425/480,0/480 ring = 425/1000,0/4000 congestion = 425/240,0/240 callwaiting = !425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,0 ; DIALRECALL - not specified dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 ; RECORDTONE - not specified record = 1400/80,0/15000 info = 950/330,1400/330,1800/330,0/1000 stutter = 425+400 [dk] description = Denmark ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = !425/200,!0/600,!425/200,!0/3000,!425/200,!0/200,!425/200,0 ; DIALRECALL - not specified dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 ; RECORDTONE - not specified record = 1400/80,0/15000 info = 950/330,1400/330,1800/330,0/1000 ; STUTTER - not specified stutter = 425/450,0/50 [ee] description = Estonia ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425 busy = 425/300,0/300 ring = 425/1000,0/4000 congestion = 425/200,0/200 ; CALLWAIT not in accordance to ITU callwaiting = 950/650,0/325,950/325,0/30,1400/1300,0/2600 ; DIALRECALL - not specified dialrecall = 425/650,0/25 ; RECORDTONE - not specified record = 1400/500,0/15000 ; INFO not in accordance to ITU info = 950/650,0/325,950/325,0/30,1400/1300,0/2600 ; STUTTER not specified stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 [es] description = Spain ringcadence = 1500,3000 dial = 425 busy = 425/200,0/200 ring = 425/1500,0/3000 congestion = 425/200,0/200,425/200,0/200,425/200,0/600 callwaiting = 425/175,0/175,425/175,0/3500 dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425 record = 1400/500,0/15000 info = 950/330,0/1000 dialout = 500 [fi] description = Finland ringcadence = 1000,4000 dial = 425 busy = 425/300,0/300 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/150,0/150,425/150,0/8000 dialrecall = 425/650,0/25 record = 1400/500,0/15000 info = 950/650,0/325,950/325,0/30,1400/1300,0/2600 stutter = 425/650,0/25 [fr] description = France ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1500,3500 ; Dialtone can also be 440+330 dial = 440 busy = 440/500,0/500 ring = 440/1500,0/3500 ; CONGESTION - not specified congestion = 440/250,0/250 callwait = 440/300,0/10000 ; DIALRECALL - not specified dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 ; RECORDTONE - not specified record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330 stutter = !440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,440 [gr] description = Greece ringcadence = 1000,4000 dial = 425/200,0/300,425/700,0/800 busy = 425/300,0/300 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/150,0/150,425/150,0/8000 dialrecall = 425/650,0/25 record = 1400/400,0/15000 info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 stutter = 425/650,0/25 [hu] description = Hungary ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1250,3750 dial = 425 busy = 425/300,0/300 ring = 425/1250,0/3750 congestion = 425/300,0/300 callwaiting = 425/40,0/1960 dialrecall = 425+450 ; RECORDTONE - not specified record = 1400/400,0/15000 info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 stutter = 350+375+400 [it] description = Italy ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 dial = 425/200,0/200,425/600,0/1000 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/400,0/100,425/250,0/100,425/150,0/14000 dialrecall = 470/400,425/400 record = 1400/400,0/15000 info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 stutter = 470/400,425/400 [lt] description = Lithuania ringcadence = 1000,4000 dial = 425 busy = 425/350,0/350 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/150,0/150,425/150,0/4000 ; DIALRECALL - not specified dialrecall = 425/500,0/50 ; RECORDTONE - not specified record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 ; STUTTER - not specified stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 [mx] description = Mexico ringcadence = 2000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/4000 congestion = 425/250,0/250 callwaiting = 425/200,0/600,425/200,0/10000 dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 record = 1400/500,0/15000 info = 950/330,0/30,1400/330,0/30,1800/330,0/1000 stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 [nl] description = Netherlands ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ringcadence = 1000,4000 ; Most of these 425's can also be 450's dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/250,0/250 callwaiting = 425/500,0/9500 ; DIALRECALL - not specified dialrecall = 425/500,0/50 ; RECORDTONE - not specified record = 1400/500,0/15000 info = 950/330,1400/330,1800/330,0/1000 stutter = 425/500,0/50 [no] description = Norway ringcadence = 1000,4000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/200,0/200 callwaiting = 425/200,0/600,425/200,0/10000 dialrecall = 470/400,425/400 record = 1400/400,0/15000 info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 stutter = 470/400,425/400 [nz] description = New Zealand ;NOTE - the ITU has different tonesets for NZ, but according to some residents there, ; this is, indeed, the correct way to do it. ringcadence = 400,200,400,2000 dial = 400 busy = 400/250,0/250 ring = 400+450/400,0/200,400+450/400,0/2000 congestion = 400/375,0/375 callwaiting = !400/200,!0/3000,!400/200,!0/3000,!400/200,!0/3000,!400/200 dialrecall = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,400 record = 1400/425,0/15000 info = 400/750,0/100,400/750,0/100,400/750,0/100,400/750,0/400 stutter = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,!400/100!0/100,!400/100,!0/100,!400/100,!0/100,400 unobtainable = 400/75,0/100,400/75,0/100,400/75,0/100,400/75,0/400 [pl] description = Poland ringcadence = 1000,4000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/500,0/500 callwaiting = 425/150,0/150,425/150,0/4000 ; DIALRECALL - not specified dialrecall = 425/500,0/50 ; RECORDTONE - not specified record = 1400/500,0/15000 ; 950/1400/1800 3x0.33 on 1.0 off repeated 3 times info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000 ; STUTTER - not specified stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 [pt] description = Portugal ringcadence = 1000,5000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/5000 congestion = 425/200,0/200 callwaiting = 440/300,0/10000 dialrecall = 425/1000,0/200 record = 1400/500,0/15000 info = 950/330,1400/330,1800/330,0/1000 stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 [ru] description = Russia / ex Soviet Union ringcadence = 800,3200 dial = 425 busy = 425/350,0/350 ring = 425/800,0/3200 congestion = 425/350,0/350 callwaiting = 425/200,0/5000 dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0 [se] description = Sweden ringcadence = 1000,5000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/5000 congestion = 425/250,0/750 callwaiting = 425/200,0/500,425/200,0/9100 dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 record = 1400/500,0/15000 info = !950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,0 stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 ; stutter = 425/320,0/20 ; Real swedish standard, not used for now [sg] description = Singapore ; Singapore ; Reference: http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf ; Frequency specs are: 425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation depth 100%; SIT +/- 50Hz ringcadence = 400,200,400,2000 dial = 425 ring = 425*24/400,0/200,425*24/400,0/2000 ; modulation should be 100%, not 90% busy = 425/750,0/750 congestion = 425/250,0/250 callwaiting = 425*24/300,0/200,425*24/300,0/3200 stutter = !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425 info = 950/330,1400/330,1800/330,0/1000 ; not currently in use acc. to reference dialrecall = 425*24/500,0/500,425/500,0/2500 ; unspecified in IDA reference, use repeating Holding Tone A,B record = 1400/500,0/15000 ; unspecified in IDA reference, use 0.5s tone every 15s ; additionally defined in reference nutone = 425/2500,0/500 intrusion = 425/250,0/2000 warning = 425/624,0/4376 ; end of period tone, warning acceptance = 425/125,0/125 holdinga = !425*24/500,!0/500 ; followed by holdingb holdingb = !425/500,!0/2500 [uk] description = United Kingdom ringcadence = 400,200,400,2000 ; These are the official tones taken from BT SIN350. The actual tones ; used by BT include some volume differences so sound slightly different ; from Asterisk-generated ones. dial = 350+440 ; Special dial is the intermittent dial tone heard when, for example, ; you have a divert active on the line specialdial = 350+440/750,440/750 ; Busy is also called "Engaged" busy = 400/375,0/375 ; "Congestion" is the Beep-bip engaged tone congestion = 400/400,0/350,400/225,0/525 ; "Special Congestion" is not used by BT very often if at all specialcongestion = 400/200,1004/300 unobtainable = 400 ring = 400+450/400,0/200,400+450/400,0/2000 callwaiting = 400/100,0/4000 ; BT seem to use "Special Call Waiting" rather than just "Call Waiting" tones specialcallwaiting = 400/250,0/250,400/250,0/250,400/250,0/5000 ; "Pips" used by BT on payphones. (Sounds wrong, but this is what BT claim it ; is and I've not used a payphone for years) creditexpired = 400/125,0/125 ; These two are used to confirm/reject service requests on exchanges that ; don't do voice announcements. confirm = 1400 switching = 400/200,0/400,400/2000,0/400 ; This is the three rising tones Doo-dah-dee "Special Information Tone", ; usually followed by the BT woman saying an appropriate message. info = 950/330,0/15,1400/330,0/15,1800/330,0/1000 ; Not listed in SIN350 record = 1400/500,0/60000 stutter = 350+440/750,440/750 [us] description = United States / North America ringcadence = 2000,4000 dial = 350+440 busy = 480+620/500,0/500 ring = 440+480/2000,0/4000 congestion = 480+620/250,0/250 callwaiting = 440/300,0/10000 dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0 stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 [us-old] description = United States Circa 1950/ North America ringcadence = 2000,4000 dial = 600*120 busy = 500*100/500,0/500 ring = 420*40/2000,0/4000 congestion = 500*100/250,0/250 callwaiting = 440/300,0/10000 dialrecall = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0 stutter = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120 [tw] description = Taiwan ; http://nemesis.lonestar.org/reference/telecom/signaling/dialtone.html ; http://nemesis.lonestar.org/reference/telecom/signaling/busy.html ; http://www.iproducts.com.tw/ee/kylink/06ky-1000a.htm ; http://www.pbx-manufacturer.com/ky120dx.htm ; http://www.nettwerked.net/tones.txt ; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/taiw_sup/taiw2.htm ; ; busy tone 480+620Hz 0.5 sec. on ,0.5 sec. off ; reorder tone 480+620Hz 0.25 sec. on,0.25 sec. off ; ringing tone 440+480Hz 1 sec. on ,2 sec. off ; ringcadence = 1000,4000 dial = 350+440 busy = 480+620/500,0/500 ring = 440+480/1000,0/2000 congestion = 480+620/250,0/250 callwaiting = 350+440/250,0/250,350+440/250,0/3250 dialrecall = 300/1500,0/500 record = 1400/500,0/15000 info = !950/330,!1400/330,!1800/330,0 stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 [ve] ; Tone definition source for ve found on ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf description = Venezuela / South America ringcadence = 1000,4000 dial = 425 busy = 425/500,0/500 ring = 425/1000,0/4000 congestion = 425/250,0/250 callwaiting = 400+450/300,0/6000 dialrecall = 425 record = 1400/500,0/15000 info = !950/330,!1440/330,!1800/330,0/1000 [za] description = South Africa ; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/safr_sup/saf02.htm ; (definitions for other countries can also be found there) ; Note, though, that South Africa uses two switch types in their network -- ; Alcatel switches -- mainly in the Western Cape, and Siemens elsewhere. ; The former use 383+417 in dial, ringback etc. The latter use 400*33 ; I've provided both, uncomment the ones you prefer ringcadence = 400,200,400,2000 ; dial/ring/callwaiting for the Siemens switches: dial = 400*33 ring = 400*33/400,0/200,400*33/400,0/2000 callwaiting = 400*33/250,0/250,400*33/250,0/250,400*33/250,0/250,400*33/250,0/250 ; dial/ring/callwaiting for the Alcatel switches: ; dial = 383+417 ; ring = 383+417/400,0/200,383+417/400,0/2000 ; callwaiting = 383+417/250,0/250,383+417/250,0/250,383+417/250,0/250,383+417/250,0/250 congestion = 400/250,0/250 busy = 400/500,0/500 dialrecall = 350+440 ; XXX Not sure about the RECORDTONE record = 1400/500,0/10000 info = 950/330,1400/330,1800/330,0/330 stutter = !400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,400*33