From f8247040e6231c4b3b5099ea3a526348b7941566 Mon Sep 17 00:00:00 2001 From: russell Date: Sat, 19 Jan 2008 00:19:29 +0000 Subject: Creating tag for the release of asterisk-1.6.0-beta1 git-svn-id: http://svn.digium.com/svn/asterisk/tags/1.6.0-beta1@99163 f38db490-d61c-443f-a65b-d21fe96a405b --- trunk/README | 262 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 trunk/README (limited to 'trunk/README') diff --git a/trunk/README b/trunk/README new file mode 100644 index 000000000..176bfca44 --- /dev/null +++ b/trunk/README @@ -0,0 +1,262 @@ +The Asterisk(R) Open Source PBX +by Mark Spencer +and the Asterisk.org developer community + +Copyright (C) 2001-2006 Digium, Inc. +and other copyright holders. +================================================================ + +* SECURITY + It is imperative that you read and fully understand the contents of +the security information file (doc/security.txt) before you attempt +to configure and run an Asterisk server. + +* WHAT IS ASTERISK ? + Asterisk is an Open Source PBX and telephony toolkit. It is, in a +sense, middleware between Internet and telephony channels on the bottom, +and Internet and telephony applications at the top. For more information +on the project itself, please visit the Asterisk home page at: + + http://www.asterisk.org + +In addition you'll find lots of information compiled by the Asterisk +community on this Wiki: + + http://www.voip-info.org/wiki-Asterisk + +There is a book on Asterisk published by O'Reilly under the +Creative Commons License. It is available in book stores as well +as in a downloadable version on the http://www.asteriskdocs.org +web site. + +* SUPPORTED OPERATING SYSTEMS + +== Linux == + The Asterisk Open Source PBX is developed and tested primarily on the +GNU/Linux operating system, and is supported on every major GNU/Linux +distribution. + +== Others == + Asterisk has also been 'ported' and reportedly runs properly on other +operating systems as well, including Sun Solaris, Apple's Mac OS X, and +the BSD variants. + +* GETTING STARTED + + First, be sure you've got supported hardware (but note that you don't need +ANY special hardware, not even a soundcard) to install and run Asterisk. + + Supported telephony hardware includes: + + * All Wildcard (tm) products from Digium (www.digium.com) + * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net) + * any full duplex sound card supported by ALSA or OSS + * any ISDN card supported by mISDN on Linux (BRI) + * The Xorcom AstriBank channel bank + * VoiceTronix OpenLine products + +The are several drivers for ISDN BRI cards available from third party sources. +Check the voip-info.org wiki for more information on chan_capi and +zaphfc. + +* UPGRADING FROM AN EARLIER VERSION + + If you are updating from a previous version of Asterisk, make sure you +read the UPGRADE.txt file in the source directory. There are some files +and configuration options that you will have to change, even though we +made every effort possible to maintain backwards compatibility. + + In order to discover new features to use, please check the configuration +examples in the /configs directory of the source code distribution. +To discover the major new features of Asterisk 1.2, please visit +http://edvina.net/asterisk1-2/ + +* NEW INSTALLATIONS + + Ensure that your system contains a compatible compiler and development +libraries. Asterisk requires either the GNU Compiler Collection (GCC) version +3.0 or higher, or a compiler that supports the C99 specification and some of +the gcc language extensions. In addition, your system needs to have the C +library headers available, and the headers and libraries for OpenSSL, +ncurses and zlib. +On many distributions, these files are installed by packages with names like +'glibc-devel', 'ncurses-devel', 'openssl-devel' and 'zlib-devel' or similar. + + So let's proceed: + +1) Read this README file. + + There are more documents than this one in the doc/ directory. +You may also want to check the configuration files that contain +examples and reference guides. They are all in the configs/ +directory. + +2) Run "./configure" + + Execute the configure script to guess values for system-dependent +variables used during compilation. + +3) Run "make menuselect" [optional] + + This is needed if you want to select the modules that will be +compiled and to check modules dependencies. + +4) Run "make" + + Assuming the build completes successfully: + +5) Run "make install" + + Each time you update or checkout from the repository, you are strongly +encouraged to ensure all previous object files are removed to avoid internal +inconsistency in Asterisk. Normally, this is automatically done with +the presence of the file .cleancount, which increments each time a 'make clean' +is required, and the file .lastclean, which contains the last .cleancount used. + + If this is your first time working with Asterisk, you may wish to install +the sample PBX, with demonstration extensions, etc. If so, run: + +6) "make samples" + + Doing so will overwrite any existing config files you have. + + Finally, you can launch Asterisk in the foreground mode (not a daemon) +with: + +# asterisk -vvvc + + You'll see a bunch of verbose messages fly by your screen as Asterisk +initializes (that's the "very very verbose" mode). When it's ready, if +you specified the "c" then you'll get a command line console, that looks +like this: + +*CLI> + + You can type "help" at any time to get help with the system. For help +with a specific command, type "help ". To start the PBX using +your sound card, you can type "dial" to dial the PBX. Then you can use +"answer", "hangup", and "dial" to simulate the actions of a telephone. +Remember that if you don't have a full duplex sound card (and Asterisk +will tell you somewhere in its verbose messages if you do/don't) then it +won't work right (not yet). + + "man asterisk" at the Unix/Linux command prompt will give you detailed +information on how to start and stop Asterisk, as well as all the command +line options for starting Asterisk. + + Feel free to look over the configuration files in /etc/asterisk, where +you'll find a lot of information about what you can do with Asterisk. + +* ABOUT CONFIGURATION FILES + + All Asterisk configuration files share a common format. Comments are +delimited by ';' (since '#' of course, being a DTMF digit, may occur in +many places). A configuration file is divided into sections whose names +appear in []'s. Each section typically contains two types of statements, +those of the form 'variable = value', and those of the form 'object => +parameters'. Internally the use of '=' and '=>' is exactly the same, so +they're used only to help make the configuration file easier to +understand, and do not affect how it is actually parsed. + + Entries of the form 'variable=value' set the value of some parameter in +asterisk. For example, in zapata.conf, one might specify: + + switchtype=national + +in order to indicate to Asterisk that the switch they are connecting to is +of the type "national". In general, the parameter will apply to +instantiations which occur below its specification. For example, if the +configuration file read: + + switchtype = national + channel => 1-4 + channel => 10-12 + switchtype = dms100 + channel => 25-47 + +the "national" switchtype would be applied to channels one through +four and channels 10 through 12, whereas the "dms100" switchtype would +apply to channels 25 through 47. + + The "object => parameters" instantiates an object with the given +parameters. For example, the line "channel => 25-47" creates objects for +the channels 25 through 47 of the card, obtaining the settings +from the variables specified above. + +* SPECIAL NOTE ON TIME + + Those using SIP phones should be aware that Asterisk is sensitive to +large jumps in time. Manually changing the system time using date(1) +(or other similar commands) may cause SIP registrations and other +internal processes to fail. If your system cannot keep accurate time +by itself use NTP (http://www.ntp.org/) to keep the system clock +synchronized to "real time". NTP is designed to keep the system clock +synchronized by speeding up or slowing down the system clock until it +is synchronized to "real time" rather than by jumping the time and +causing discontinuities. Most Linux distributions include precompiled +versions of NTP. Beware of some time synchronization methods that get +the correct real time periodically and then manually set the system +clock. + + Apparent time changes due to daylight savings time are just that, +apparent. The use of daylight savings time in a Linux system is +purely a user interface issue and does not affect the operation of the +Linux kernel or Asterisk. The system clock on Linux kernels operates +on UTC. UTC does not use daylight savings time. + + Also note that this issue is separate from the clocking of TDM +channels, and is known to at least affect SIP registrations. + +* FILE DESCRIPTORS + + Depending on the size of your system and your configuration, +Asterisk can consume a large number of file descriptors. In UNIX, +file descriptors are used for more than just files on disk. File +descriptors are also used for handling network communication +(e.g. SIP, IAX2, or H.323 calls) and hardware access (e.g. analog and +digital trunk hardware). Asterisk accesses many on-disk files for +everything from configuration information to voicemail storage. + + Most systems limit the number of file descriptors that Asterisk can +have open at one time. This can limit the number of simultaneous +calls that your system can handle. For example, if the limit is set +at 1024 (a common default value) Asterisk can handle approxiately 150 +SIP calls simultaneously. To change the number of file descriptors +follow the instructions for your system below: + +== PAM-based Linux System == + + If your system uses PAM (Pluggable Authentication Modules) edit +/etc/security/limits.conf. Add these lines to the bottom of the file: + +root soft nofile 4096 +root hard nofile 8196 +asterisk soft nofile 4096 +asterisk hard nofile 8196 + +(adjust the numbers to taste). You may need to reboot the system for +these changes to take effect. + +== Generic UNIX System == + + If there are no instructions specifically adapted to your system +above you can try adding the command "ulimit -n 8192" to the script +that starts Asterisk. + +* MORE INFORMATION + + See the doc directory for more documentation on various features. Again, +please read all the configuration samples that include documentation on +the configuration options. + + Finally, you may wish to visit the web site and join the mailing list if +you're interested in getting more information. + + http://www.asterisk.org/support + + Welcome to the growing worldwide community of Asterisk users! + +Mark Spencer + +---- +Asterisk is a trademark belonging to Digium, inc -- cgit v1.2.3