From b1742b89db7d0f0335f59a3b701895683e0f3d2f Mon Sep 17 00:00:00 2001 From: root Date: Thu, 17 Aug 2006 22:04:22 +0000 Subject: automerge commit git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.2-netsec@40332 f38db490-d61c-443f-a65b-d21fe96a405b --- doc/README.misdn | 36 ++++-------------------------------- 1 file changed, 4 insertions(+), 32 deletions(-) (limited to 'doc') diff --git a/doc/README.misdn b/doc/README.misdn index 652ba70cd..ab029e4d1 100644 --- a/doc/README.misdn +++ b/doc/README.misdn @@ -11,6 +11,7 @@ Features: * NT and TE mode * PP and PMP mode * BRI and PRI (with BNE1 and BN2E1 Cards) +* Hardware Bridging * DTMF Detection in HW+mISDNdsp (much better than asterisks internal!) * Display Messages to Phones (which support display msg) * HOLD/RETRIEVE/TRANSFER on ISDN Phones : ) @@ -21,6 +22,7 @@ Features: * Data (HDLC) callthrough * Data Calling (with app_ptyfork +pppd) * Echo cancellation +* CallDeflection * Some other Supported Hardware: @@ -54,8 +56,7 @@ channels/misdn. You just need to type: cd channels/misdn make misdn -Then all the necessary files are fetched from jollys homepage and are patched -with the Echocanellor. +Then all the necessary files are fetched from isdn4linux.de. Pre-Requisites @@ -64,7 +65,7 @@ Pre-Requisites To compile and install this driver, you'll need at least one mISDN Driver and the mISDNuser package. Chan_misdn works with both, the current release version and the development (svn trunk) version of Asterisk. mISDNuser and mISDN must -be fetched from jollys homepage and must be patched with the Echocancellor. +be fetched from cvs.isdn4linux.de. Please Note that mISDN works good for the linux-2.6.x kernels. Some of the mISDN drivers do not compile against the 2.4.x or older kernels, you can patch @@ -140,10 +141,6 @@ should insert here the msns which you'll like to give the Asterisk). Finally a context variable resides in the user sections, which tells chan_misdn where to send incoming calls to in the Asterisk dial plan (extension.conf). -In NT-Mode Ports there is a new option, directly after the port number you can -write ptp, this enables PP Mode for this port, please look at misdn.conf.sample for -an example. - Dial and Options String ----------------------- @@ -283,31 +280,6 @@ the pci_find_subgsys funktion, so hfc_multi from mISDN doesn't compile against it, you can just change pci_find_subsys to pci_get_subsys, this works. -- chan_misdn-0.0.3-rc1: - * linux-kernel >= 2.6.3 (but at least 2.6) - * asterisk >= v1-0 - * mISDN/mISDNuser since September/04 - -- chan_misdn-0.0.3-rc3: - * linux-kernel >= 2.6.3 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser since December/04 - -- chan_misdn-0.0.3-rc4: - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser head on cvs.isdn4linux.de - -- chan_misdn-0.0.3-rc6: - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser head on cvs.isdn4linux.de - -- chan_misdn-0.1.0 - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 , also CVS Head - * mISDN/mISDNuser (3.0-beta) from isdn.jolly.de - - chan_misdn-0.2.1 * linux-kernel >= 2.6.8 (but at least 2.6) * asterisk >= v1.2 , also CVS Head -- cgit v1.2.3