From 0c43a5ab3637e311a9232ae77ecd8e7f05c2f8cc Mon Sep 17 00:00:00 2001 From: oej Date: Wed, 1 Feb 2006 17:49:02 +0000 Subject: - Removing the "README." from the name of the README files. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@9047 f38db490-d61c-443f-a65b-d21fe96a405b --- doc/asterisk-conf.txt | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 doc/asterisk-conf.txt (limited to 'doc/asterisk-conf.txt') diff --git a/doc/asterisk-conf.txt b/doc/asterisk-conf.txt new file mode 100644 index 000000000..4e210aacd --- /dev/null +++ b/doc/asterisk-conf.txt @@ -0,0 +1,76 @@ +Asterisk Main Configuration File +----------------------------------------------------- +Below is a sample of the main Asterisk configuration file, +asterisk.conf. Note that this file is _not_ provided in +sample form, because the Makefile creates it when needed +and does not touch it when it already exists. + +--------------- + +[directories] +; Make sure these directoriess have the right permissions if not +; running Asterisk as root + +; Where the configuration files (except for this one) are located +astetcdir => /etc/asterisk + +; Where the Asterisk loadable modules are located +astmoddir => /usr/lib/asterisk/modules + +; Where additional 'library' elements (scripts, etc.) are located +astvarlibdir => /var/lib/asterisk + +; Where AGI scripts/programs are located +astagidir => /var/lib/asterisk/agi-bin + +; Where spool directories are located +; Voicemail, monitor, dictation and other apps will create files here +; and outgoing call files (used with pbx_spool) must be placed here +astspooldir => /var/spool/asterisk + +; Where the Asterisk process ID (pid) file should be created +astrundir => /var/run/asterisk + +; Where the Asterisk log files should be created +astlogdir => /var/log/asterisk + + +[options] +;Under "options" you can enter configuration options +;that you also can set with command line options + +verbose = 0 ; Verbosity level for logging (-v) +debug = 3 ; Debug: "No" or value (1-4) +nofork=yes | no ; Background execution disabled (-f) +console= yes | no ; Console mode (-c) +highpriority = yes | no ; Execute with high priority (-p) +initcrypto = yes | no ; Initialize crypto at startup (-i) +nocolor = yes | no ; Disable ANSI colors (-n) +dumpcore = yes | no ; Dump core on failure (-g) +quiet = yes | no ; Run quietly (-q) +timestamp = yes | no ; Force timestamping on log entries to console (-T) +runuser = asterisk ; User to run asterisk as (-U) NOTE: will require changes to + ; directory and device permisions +rungroup = asterisk ; Group to run asterisk as (-G) + +;These options have no command line equivalent +cache_record_files = yes | no ; Cache record() files in another directory until completion +record_cache_dir = +transcode_via_sln = yes | no ; Build transcode paths via SLINEAR +transmit_silence_during_record = yes | no ; send SLINEAR silence while channel is being recorded +maxload = 1.0 ; The maximum load average we accept calls for +maxcalls = 255 ; The maximum number of concurrent calls you want to allow +execincludes = yes | no ; Allow #exec entries in configuration files +dontwarn = yes | no ; Don't over-inform the Asterisk sysadm, he's a guru + +[files] +; Changing the following lines may compromise your security +; Asterisk.ctl is the pipe that is used to connect the remote CLI +; (asterisk -r) to Asterisk. Changing these settings change the +; permissions and ownership of this file. +; The file is created when Asterisk starts, in the "astrundir" above. + +;astctlpermissions = 0660 +;astctlowner = root +;astctlgroup = asterisk +;astctl = asterisk.ctl -- cgit v1.2.3