From deaeb590ca51209f721a43569f807adc8beec93d Mon Sep 17 00:00:00 2001 From: root Date: Fri, 18 Aug 2006 20:04:23 +0000 Subject: automerge commit git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.2-netsec@40423 f38db490-d61c-443f-a65b-d21fe96a405b --- configs/zapata.conf.sample | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'configs') diff --git a/configs/zapata.conf.sample b/configs/zapata.conf.sample index 690eb8797..d24f0e56a 100644 --- a/configs/zapata.conf.sample +++ b/configs/zapata.conf.sample @@ -303,10 +303,17 @@ callreturn=yes ; Use either "yes", "no", or a power of two from 32 to 256 if you wish to ; actually set the number of taps of cancellation. ; +; Note that if any of your Zaptel cards have hardware echo cancellers, +; then this setting only turns them on and off; numeric settings will +; be treated as "yes". There are no special settings required for +; hardware echo cancellers; when present and enabled in their kernel +; modules, they take precedence over the software echo canceller compiled +; into Zaptel automatically. +; echocancel=yes ; ; Generally, it is not necessary (and in fact undesirable) to echo cancel when -; the circuit path is entirely TDM. You may, however, reverse this behavior +; the circuit path is entirely TDM. You may, however, change this behavior ; by enabling the echo cancel during pure TDM bridging below. ; echocancelwhenbridged=yes @@ -318,6 +325,8 @@ echocancelwhenbridged=yes ; closer idea of the actual echo. Value may be "yes", "no", or a number of ; milliseconds to delay before training (default = 400) ; +; Note that these parameters do not apply to hardware echo cancellers. +; ;echotraining=yes ;echotraining=800 ; -- cgit v1.2.3