From ccb307b7a87bd930f286efcf887513f034cab9da Mon Sep 17 00:00:00 2001 From: oej Date: Sun, 6 Jul 2008 20:19:04 +0000 Subject: - Adding alias "udpbindaddr" for the UDP port to comply with "tcpbindaddr" and "tlsbindaddr". Note: I don't think we can start properly without UDP port open, that needs to be tested. - Removing "bindport" from configuration example, not needed to mention this any more I suggest we deprecate "bindaddr" and "bindport" in trunk (for 1.6.1) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128525 f38db490-d61c-443f-a65b-d21fe96a405b --- configs/sip.conf.sample | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'configs') diff --git a/configs/sip.conf.sample b/configs/sip.conf.sample index 64adbf2c1..54f497328 100644 --- a/configs/sip.conf.sample +++ b/configs/sip.conf.sample @@ -75,11 +75,8 @@ allowoverlap=no ; Disable overlap dialing support. (Default is yes) ; asterisk.conf, it defaults to that system name ; Realms MUST be globally unique according to RFC 3261 ; Set this to your host name or domain name -bindport=5060 ; UDP Port to bind to (SIP standard port for unencrypted UDP - ; and TCP sessions is 5060) - ; bindport is the local UDP port that Asterisk will listen on -bindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) - ; You can specify port here too, like 123.123.123.123:5080 +udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) + ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) ; ; Note that the TCP and TLS support for chan_sip is currently considered -- cgit v1.2.3