From 41300db58d9523d50ce0dc32f98ab06ed058e1ec Mon Sep 17 00:00:00 2001
From: markster <markster@f38db490-d61c-443f-a65b-d21fe96a405b>
Date: Wed, 7 Jul 2004 09:34:01 +0000
Subject: Add IAX provisioning support to Asterisk

git-svn-id: http://svn.digium.com/svn/asterisk/trunk@3382 f38db490-d61c-443f-a65b-d21fe96a405b
---
 configs/iaxprov.conf.sample | 86 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100755 configs/iaxprov.conf.sample

(limited to 'configs/iaxprov.conf.sample')

diff --git a/configs/iaxprov.conf.sample b/configs/iaxprov.conf.sample
new file mode 100755
index 000000000..f39db1834
--- /dev/null
+++ b/configs/iaxprov.conf.sample
@@ -0,0 +1,86 @@
+;
+; IAX2 Provisioning Information
+;
+; Contains provisioning information for templates
+; and for specific service entries.
+;
+; Templates provide a group of settings from which provisioning takes
+; place.  A template may be based upon any template that has been
+; specified before it.  If the template that an entry is based on is not
+; specified then it is presumed to be 'default' (unless it is the first
+; of course).  
+;
+; Templates which begin with 'si-' are used for provisioning 
+; units with specific service identifiers.  For example the
+; entry "si-000364000126" would be used when the device with the
+; corresponding service identifier of "000364000126" attempts
+; to register or make a call.
+;
+[default]
+;
+; The port number the device should use to bind to.  The default
+; is 4569
+;
+;port=4569
+;
+; server is our PRIMARY server for registration and placing calls
+;
+;server=192.168.69.3
+;
+; altserver is the BACKUP server for registration and placing calls
+; in the event the primary server is unavailable.
+;
+;altserver=192.168.69.4
+;
+; port is the port number to use for IAX2 outbound.  The 
+; connections to the server and altserver -- default is of course
+; 4569.
+;serverport=4569
+;
+; language is the preferred language for the device
+;
+;language=en
+;
+; codec is the requested codec.  The iaxy supports ulaw and adpcm
+;
+codec=ulaw
+;
+; flags is a comma separated list of flags which the device should
+; use and may contain any of the following keywords:
+;
+;  "register"  - Register with server
+;  "secure"    - Do not accept calls / provisioning not originated by the server
+;  "heartbeat" - Generate status packets on port 9999 sent to 255.255.255.255
+;  "debug"     - Output extra debugging to port 9999
+;
+;  Note that use can use += and -= to adjust parameters
+;
+flags=register,heartbeat
+;
+; tos is the requested type of service setting and may be one a number or
+; 'lowdelay','throughput','reliability','mincost' or 'none'
+;
+tos=lowdelay
+;
+; Example iaxy provisioning
+;
+;[si-000364000126]
+;user=iaxy
+;pass=bitsy
+;flags += debug
+
+;[si-000364000127]
+;user=iaxy2
+;pass=bitsy2
+;template=si-000364000126
+;flags += debug
+
+;
+;[*]
+;
+;  If specified, the '*' provisioning is used for all devices which do
+;  not have another provisioning entry within the file.  If unspecified, no
+;  provisioning will take place for devices which have no entry.  DO NOT
+;  USE A '*' PROVISIONING ENTRY UNLESS YOU KNOW WHAT YOU'RE DOING.
+;
+;template=default
-- 
cgit v1.2.3