Age | Commit message (Collapse) | Author | Files | Lines |
|
or wrlock
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@96024 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
enabled.
(closes issue #11347)
Reported by: ys
Patches:
pbx.pbx_config.c.diff uploaded by ys (license 281)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@89592 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
where the semicolon is not escaped. Fixed this; User also wanted comments to be preserved across dialplan save, but this is impossible at this point in time, because comments are not stored in the dialplan. They are 'compiled' out of extensions.conf. The only way to preserve those comments is to use the config file reader/writer that the GUI uses to allow online user edits. extensions.conf is first and foremost, a config file, and is read in by the normal config-file reading routines. Then, it is processed into a dialplan (context/exten structs).
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@87849 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
user exists.
(closes issue #10971)
Reported by: dimas
Patches:
pbxconfig.patch uploaded by dimas (license 88)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@85540 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
reported by dome)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@73930 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r72267 | russell | 2007-06-27 16:06:45 -0500 (Wed, 27 Jun 2007) | 5 lines
Fix a minor issue with parsing the priority number. You could have as much
whitespace as you want around a numeric priority, but you couldn't have any
whitespace around a special priority like "n" or "hint".
(issue #10039, reported by mitheloc, fixed by me)
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@72272 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@68595 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r56850 | file | 2007-02-26 15:05:02 -0500 (Mon, 26 Feb 2007) | 2 lines
Obey the clearglobalvars option in extensions reload (or dialplan reload depending on your version). (issue #9146 reported by ramonpeek)
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@56856 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
pbx.c. However, if the option was not present in extensions.conf, then
pbx_config.c would set it back to disabled.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@54898 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@52679 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This looks like it may have been a chicken/egg scenario..
You had to call a cleanup func, because everything was allocated.
Then since you had to call a cleanup func, you were forced to allocate - ie; strdup("").
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@49742 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
creating the dial string for users. (issue #8697 reported by ssokol)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@49073 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@44186 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(issue 7983).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@43364 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@43212 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@43052 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
now reports AST_MODULE_LOAD_DECLINE when loading if config file
is not there, also fixed an error in res_config_pgsql where it
had a non static function when it should.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@41633 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r41269 | russell | 2006-08-29 09:33:34 -0400 (Tue, 29 Aug 2006) | 3 lines
clean up last commit ... most notably, there is no reason to do heap
allocations here, and it also included a potential memory leak
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@41270 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@41267 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@40722 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
- instead of defining a free() wrapper in a bunch of files, define it as
ast_free() in utils.h and remove the copies from all the files.
- centralize and abstract the code used for doing thread storage. The code
lives in threadstorage.h, with one function being implemented in utils.c.
This new API includes generic thread storage as well as special functions
for handling thread local dynamic length string buffers.
- update ast_inet_ntoa() to use the new threadstorage API
- update ast_state2str() to use the new threadstorage API
- update ast_cli() to use the new threadstorage API
- Modify manager_event() to use thread storage. Instead of using a buffer of
4096 characters as the workspace for building the manager event, use a thread
local dynamic string. Now there is no length limitation on the length of the
body of a manager event.
- Significantly simplify the handling of ast_verbose() ...
- Instead of using a static char buffer and a lock to make sure only one
thread can be using ast_verbose() at a time, use a thread local dynamic
string as the workspace for preparing the verbose message. Instead of
locking around the entire function, the only locking done now is when the
message has been built and is being deliviered to the list of registered
verbose message handlers.
- This function was doing a strdup() on every message passed to it and
keeping a queue of the last 200 messages in memory. This has been
completely removed. The only place this was used was that if there were
any messages in the verbose queue when a verbose handler was registered,
all of the messages in the queue would be fed to it. So, I just made sure
that the console verbose handler and the network verbose handler (for
remote asterisk consoles) were registered before any verbose messages.
pbx_gtkconsole and pbx_kdeconsole will now lose a few verbose messages at
startup, but I didn't feel the performance hit of this message queue was
worth saving the initial verbose output for these very rarely used modules.
- I have removed the last three arguments to the verbose handlers, leaving
only the string itself because they aren't needed anymore. For example,
ast_verbose had some logic for telling the verbose handler to add
a newline if the buffer was completely full. Now that the buffer can grow
as needed, this doesn't matter anymore.
- remove unused function, ast_verbose_dmesg() which was to dispatch the
message queue
- Convert the list of verbose handlers to use the linked list macros.
- add missing newline characters to a few ast_verbose() calls
- convert the list of log channels to use the linked list macros in logger.c
- fix close_logger() to close all of the files it opened for logging
- update ast_log() to use a thread local dynamic string for its workspace
for preparing log messages instead of a buffer of size BUFSIZ (8kB on my
system) allocated on the stack. The dynamic string in this case is limited
to only growing to a maximum size of BUFSIZ.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@39272 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r37417 | kpfleming | 2006-07-12 08:18:21 -0500 (Wed, 12 Jul 2006) | 2 lines
get rid of some more printf's (although most of these were ifdef-ed out)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@37418 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
again :-)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@32846 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
do so
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@32281 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@26170 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@20003 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r19345 | kpfleming | 2006-04-11 16:14:42 -0500 (Tue, 11 Apr 2006) | 2 lines
don't destroy the entire dialplan during 'reload', just atomically replace it like 'extensions reload' does (issue #6047)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@19346 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
description() and key() return values
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@18552 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
fix indentation of a large function, localize some variables
and add/remove whitespace where needed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@17827 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Also convert to MOD_1 style.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@17825 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This way the MALLOC_DEBUG code will always get the correct argument.
(bug introduced in SVN15818)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@17824 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
this...
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@16234 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
inconsistencies.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@15818 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@10989 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@10988 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(issue #6286)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@8203 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
/branches/1.2
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@7832 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
formatting, remove some unnecessary casts, and other little code cleanups.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@7331 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@7096 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@6847 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
it is no longer specified in extensions.conf
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@6771 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
and pbx_config
clean up some formatting
remove some commented out reference code
move unload_module in pbx_ael down to be with the rest of the standard module functions
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@6630 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@6596 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
get updated), settable in extensions.conf
change app_dial to use 'j' to _ENABLE_ priority jumping if it has been globally disabled
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@6224 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@5866 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
hardcoded paths (modules must now use run-time paths as they should) (bug #4116)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@5855 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@5825 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
#4320)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@5723 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
application
from the application arguments (bug #4306)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@5721 f38db490-d61c-443f-a65b-d21fe96a405b
|