Age | Commit message (Collapse) | Author | Files | Lines |
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r221592 | kpfleming | 2009-10-01 11:16:09 -0500 (Thu, 01 Oct 2009) | 12 lines
Remove ability to control T.38 FAX error correction from udptl.conf.
chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@221622 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r221432 | mnicholson | 2009-09-30 15:40:20 -0500 (Wed, 30 Sep 2009) | 17 lines
Merged revisions 221360 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221360 | mnicholson | 2009-09-30 14:36:06 -0500 (Wed, 30 Sep 2009) | 10 lines
Fix SRV lookup and Request-URI generation in chan_sip.
This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur.
(closes issue #14418)
Reported by: klaus3000
Tested by: klaus3000, mnicholson
Review: https://reviewboard.asterisk.org/r/369/
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@221477 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r221368 | mnick | 2009-09-30 14:42:36 -0500 (Wed, 30 Sep 2009) | 23 lines
Merged revisions 221153,221157,221303 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221153 | mnick | 2009-09-30 10:37:39 -0500 (Wed, 30 Sep 2009) | 2 lines
check bounds - prevents for buffer overflow
........
r221157 | mnick | 2009-09-30 10:41:46 -0500 (Wed, 30 Sep 2009) | 8 lines
added a new dialplan function 'CSV_QUOTE' and changed the cdr_custom.sample.conf
(closes issue #15471)
Reported by: dkerr
Patches:
csv_quote_14.txt uploaded by mnick (license )
Tested by: mnick
........
r221303 | mnick | 2009-09-30 14:02:00 -0500 (Wed, 30 Sep 2009) | 2 lines
changed the prototype definition of csv_quote
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@221371 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r221266 | twilson | 2009-09-30 12:52:30 -0500 (Wed, 30 Sep 2009) | 32 lines
Merged revisions 221086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@221304 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r219061 | tilghman | 2009-09-16 18:42:12 -0500 (Wed, 16 Sep 2009) | 15 lines
Merged revisions 219023 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219023 | tilghman | 2009-09-16 18:21:53 -0500 (Wed, 16 Sep 2009) | 8 lines
Properly deal with quotes in the arguments of '#exec' includes.
(closes issue #15583)
Reported by: pkempgen
Patches:
20090726__issue15583.diff.txt uploaded by tilghman (license 14)
20090726__issue15583-1.4-4.diff.txt uploaded by pkempgen (license 169)
Tested by: pkempgen
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@219063 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r218361 | tilghman | 2009-09-14 14:29:48 -0500 (Mon, 14 Sep 2009) | 11 lines
Recorded merge of revisions 218331 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r218331 | tilghman | 2009-09-14 14:16:35 -0500 (Mon, 14 Sep 2009) | 4 lines
Don't say "Please try again" if we don't give the user another chance to try again.
(issue #15055, SWP-129)
Reported by: jthurman
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@218364 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r216438 | oej | 2009-09-04 16:02:34 +0200 (Fre, 04 Sep 2009) | 35 lines
Merged revisions 216430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines
Make apps send PROGRESS control frame for early media and fix too early media issue in SIP
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@216647 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r215955 | dvossel | 2009-09-03 11:31:54 -0500 (Thu, 03 Sep 2009) | 6 lines
Merge code associated with AST-2009-006
(closes issue #12912)
Reported by: rathaus
Tested by: tilghman, russell, dvossel, dbrooks
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@216007 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r213494 | qwell | 2009-08-21 11:04:21 -0500 (Fri, 21 Aug 2009) | 12 lines
Merged revisions 213493 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r213493 | qwell | 2009-08-21 11:03:21 -0500 (Fri, 21 Aug 2009) | 5 lines
Clarify queues.conf comments to specify that variables should be set in the dialplan.
(closes issue #15755)
Reported by: trendboy
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@213497 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r213098 | tilghman | 2009-08-19 16:05:17 -0500 (Wed, 19 Aug 2009) | 9 lines
Better parsing for the "register" line
Allows characters that are otherwise used as delimiters to be used within
certain fields (like the secret).
(closes issue #15008, closes issue #15672)
Reported by: tilghman
Patches:
20090818__issue15008.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, tilghman
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@213117 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r212857 | tilghman | 2009-08-18 14:25:09 -0500 (Tue, 18 Aug 2009) | 4 lines
Make the default extconfig.conf match entries with the sample res_mysql.conf.
This eliminates a future source of possible confusion with the configuration of
1.6.1 and higher.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@212866 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r210190 | kpfleming | 2009-08-03 15:48:48 -0500 (Mon, 03 Aug 2009) | 11 lines
Rename 'canreinvite' option to 'directmedia', with backwards compatibility.
It is clear from multiple mailing list, forum, wiki and other sorts of posts
that users don't really understand the effects that the 'canreinvite' config
option actually has, and that in some cases they think that setting it to 'no'
will actually cause various other features (T.38, MOH, etc.) to not work properly,
when in fact this is not the case. This patch changes the proper name of the
option to what it should have been from the beginning ('directmedia'), but
preserves backwards compatibility for existing configurations.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@210191 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r209132 | mmichelson | 2009-07-27 12:50:04 -0500 (Mon, 27 Jul 2009) | 24 lines
Merged revisions 209131 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209131 | mmichelson | 2009-07-27 12:44:06 -0500 (Mon, 27 Jul 2009) | 18 lines
Allow for UDPTL to use only even-numbered ports if desired.
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@209135 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r208813 | mvanbaak | 2009-07-25 14:03:25 +0200 (Sat, 25 Jul 2009) | 10 lines
add default alias reload to run module reload.
Requiring 'module reload' to reload everything, including
core etc makes russell very unhappy.
The default configuration already loads the 'friendly' aliases template.
Added 'reload=module reload' to that template.
Also removed the comment in main/cli.c that reload should come back.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@208816 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r207095 | jpeeler | 2009-07-17 14:16:35 -0500 (Fri, 17 Jul 2009) | 2 lines
Update some missing allowed options for overlapdial
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@207104 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r206873 | dvossel | 2009-07-16 16:33:51 -0500 (Thu, 16 Jul 2009) | 12 lines
Merged revisions 206872 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206872 | dvossel | 2009-07-16 16:33:19 -0500 (Thu, 16 Jul 2009) | 6 lines
error in iax.conf related IP-based access control
(closes issue #15518)
Reported by: pkempgen
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@206874 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r204440 | russell | 2009-06-30 12:22:16 -0500 (Tue, 30 Jun 2009) | 2 lines
Rename res_config_sqlite.conf to res_config_sqlite.conf.sample (missing .sample).
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@204442 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r203699 | file | 2009-06-26 16:27:24 -0300 (Fri, 26 Jun 2009) | 2 lines
Improve T.38 negotiation by exchanging session parameters between application and channel.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@203705 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r200799 | moy | 2009-06-15 21:24:30 -0500 (Mon, 15 Jun 2009) | 2 lines
keep backwards compatible chan_dahdi with older openr2 versions by not using the new skip category feature unless supported
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@200807 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r200477 | moy | 2009-06-14 01:13:48 -0500 (Sun, 14 Jun 2009) | 3 lines
added openr2 to menuselect-deps.in, recent commit in menuselect made me realize this was never done but was working anyways
also added support for skip category request feature of openr2 and updated chan_dahdi.conf.sample
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@200512 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r198791 | file | 2009-06-02 10:48:06 -0300 (Tue, 02 Jun 2009) | 5 lines
Correct documentation for the register line, specifically where the domain should be specified.
(closes issue #14367)
Reported by: Nick_Lewis
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@198794 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r198186 | russell | 2009-05-29 18:04:31 -0500 (Fri, 29 May 2009) | 2 lines
Suggesting that only a single timing module be loaded is no longer necessary.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@198188 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@197441 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r197089 | seanbright | 2009-05-27 12:07:57 -0400 (Wed, 27 May 2009) | 6 lines
Fix references to /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf in
the sample configuration files.
(closes issue #15207)
Reported by: seandarcy
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@197092 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r196416 | dvossel | 2009-05-22 16:09:45 -0500 (Fri, 22 May 2009) | 19 lines
SIP set outbound transport type from Registration
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@196452 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r194765 | russell | 2009-05-15 13:43:42 -0500 (Fri, 15 May 2009) | 10 lines
Merged revisions 194764 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194764 | russell | 2009-05-15 13:43:18 -0500 (Fri, 15 May 2009) | 2 lines
Fix some spelling fail.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@194768 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r193194 | kpfleming | 2009-05-08 09:06:15 -0500 (Fri, 08 May 2009) | 13 lines
Merged revisions 193193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193193 | kpfleming | 2009-05-08 09:03:28 -0500 (Fri, 08 May 2009) | 7 lines
Make absolute paths for logger channels work properly
(Note: This is not a new feature, it was previously undocumented and broken.)
The Asterisk logger has a feature to support absolute pathnames for logger channels, but the code implementing the feature was broken. This has been fixed, and the absolute path feature is now documented in the sample logger.conf.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@193197 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r191955 | kpfleming | 2009-05-04 11:57:36 +0200 (Mon, 04 May 2009) | 8 lines
Ensure that by default only one console channel driver is loaded
This configuration file was changed to ensure that only one console channel driver
(chan_oss) is loaded by default, but the change would only work if chan_console
was not built. Now it will work as expected; if chan_alsa or chan_console are built
and installed, they will not be loaded unless explicity requested.
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@191958 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r186444 | tilghman | 2009-04-03 14:30:34 -0500 (Fri, 03 Apr 2009) | 14 lines
Merged revisions 186415 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186415 | tilghman | 2009-04-03 14:06:58 -0500 (Fri, 03 Apr 2009) | 7 lines
Distinguish in a sent email between simple sends and forwards.
(closes issue #11678)
Reported by: jamessan
Patches:
20090330__bug11678.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, lmadsen
........
................
r186447 | tilghman | 2009-04-03 14:59:55 -0500 (Fri, 03 Apr 2009) | 9 lines
Merged revisions 186445 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186445 | tilghman | 2009-04-03 14:56:48 -0500 (Fri, 03 Apr 2009) | 2 lines
Found a conflict in the last commit, due to multiple targets
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@186449 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r186175 | mmichelson | 2009-04-02 16:56:21 -0500 (Thu, 02 Apr 2009) | 11 lines
Merged revisions 186174 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186174 | mmichelson | 2009-04-02 16:55:34 -0500 (Thu, 02 Apr 2009) | 5 lines
Fix instructions in one-step parking comment to make more sense.
Changed a capital K to a lowercase k.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@186178 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r186060 | tilghman | 2009-04-02 12:10:28 -0500 (Thu, 02 Apr 2009) | 16 lines
Merged revisions 186059 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r186059 | tilghman | 2009-04-02 12:09:13 -0500 (Thu, 02 Apr 2009) | 9 lines
Merged revisions 186056 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r186056 | tilghman | 2009-04-02 12:02:18 -0500 (Thu, 02 Apr 2009) | 2 lines
Fix for AST-2009-003
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@186063 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r185123 | rmudgett | 2009-03-30 15:42:14 -0500 (Mon, 30 Mar 2009) | 9 lines
Merged revisions 185121 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185121 | rmudgett | 2009-03-30 15:40:11 -0500 (Mon, 30 Mar 2009) | 1 line
Update the channel allocation method documentation.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@185129 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
................
r183914 | tilghman | 2009-03-24 10:26:42 -0500 (Tue, 24 Mar 2009) | 10 lines
Merged revisions 183913 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183913 | tilghman | 2009-03-24 10:25:42 -0500 (Tue, 24 Mar 2009) | 3 lines
Additionally note that the operator option needs an 'o' extension.
(Related to issue #14731)
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.2@183917 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@182355 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #14646)
Reported by: strk
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@181499 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180380 | mmichelson | 2009-03-05 12:58:48 -0600 (Thu, 05 Mar 2009) | 25 lines
Fix broken mailbox parsing when searchcontexts option is enabled.
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@180383 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@180155 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180006 | mmichelson | 2009-03-03 16:48:18 -0600 (Tue, 03 Mar 2009) | 17 lines
Clarify some documentation of queues.conf.sample
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@180007 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@179164 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@178986 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #13826)
Reported by: azielke
Patches:
pickupsound2-trunk.patch uploaded by azielke (license 548)
__20081124_bug_13826_updated.patch uploaded by lmadsen (license 10)
Tested by: lmadsen
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@178919 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@178733 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178445 | tilghman | 2009-02-24 17:25:24 -0600 (Tue, 24 Feb 2009) | 5 lines
Add section about the #exec command in configuration files.
(closes issue #14540)
Reported by: jtodd
Patch by: jtodd, with additional notes by tilghman (license 14)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@178446 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #14372)
Reported by: fhackenberger
Patches:
voicemail_individual_subject_and_body_1.6.1 uploaded by fhackenberger (license 592)
with additional fixes by Corydon76 (license 14)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@178107 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@177320 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@176627 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@176556 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
Review: http://reviewboard.digium.com/r/159/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175597 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175411 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175344 f38db490-d61c-443f-a65b-d21fe96a405b
|