Age | Commit message (Collapse) | Author | Files | Lines |
|
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@321546 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319938 | jrose | 2011-05-20 08:28:24 -0500 (Fri, 20 May 2011) | 12 lines
Adds legacy_useroption_parsing to address interoperability concerns.
With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@319939 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314666 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #19076)
Reported by: lmadsen
Patches:
__20110408-channel-description.txt uploaded by lmadsen (license 10)
Tested by: lmadsen
Review: https://reviewboard.asterisk.org/r/1163/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313528 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309765 | mmichelson | 2011-03-06 18:13:36 -0600 (Sun, 06 Mar 2011) | 3 lines
Indicate that Asterisk uses the Allow header to determine if MESSAGE requests should be sent.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@309766 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308679 | twilson | 2011-02-23 21:41:34 -0600 (Wed, 23 Feb 2011) | 15 lines
Merged revisions 308678 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r308678 | twilson | 2011-02-23 21:38:22 -0600 (Wed, 23 Feb 2011) | 8 lines
Use remotesecret to authenticate with a remote party
The remotesecret option was only being used for outbound registration
and not for placing calls. This patch uses remotesecret on outbound
calls if it is set, otherwise secret is still used.
Review: https://reviewboard.asterisk.org/r/1107/
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@308680 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Adding links to http(s)://wiki.asterisk.org
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@305843 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Adding links to http(s)://wiki.asterisk.org
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@305799 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
sip show settings reports qualifyfreq in milliseconds.
sip.conf configures qualifyfreg in seconds.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@305650 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@305248 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302005 | twilson | 2011-01-17 09:04:59 -0600 (Mon, 17 Jan 2011) | 2 lines
Document "encryption" option in sip.conf.sample
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@302006 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r298773 | marquis | 2010-12-17 12:26:31 -0500 (Fri, 17 Dec 2010) | 10 lines
Fix parsing of mwi => lines in sip.conf
Reworking parsing of mwi => lines to resolve a segfault. Also add a set of unit tests for the function that does the parsing.
(closes issue #18350)
Reported by: gbour
Tested by: Marquis, gbour
Review: https://reviewboard.asterisk.org/r/1053/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@298774 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r285006 | dvossel | 2010-09-03 17:21:50 -0500 (Fri, 03 Sep 2010) | 9 lines
Disables auth_options_request option by default.
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@285007 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284950 | dvossel | 2010-09-03 12:29:02 -0500 (Fri, 03 Sep 2010) | 14 lines
authenticate OPTIONS requests just like we would an INVITE
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@284951 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283493 | dvossel | 2010-08-24 15:34:03 -0500 (Tue, 24 Aug 2010) | 2 lines
Changes the default behavior for sip.conf's pedantic option from "no" to "yes".
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@283494 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282740 | twilson | 2010-08-18 21:18:50 -0500 (Wed, 18 Aug 2010) | 16 lines
Merged revisions 282730 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282730 | twilson | 2010-08-18 21:14:28 -0500 (Wed, 18 Aug 2010) | 9 lines
Merged revisions 282729 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282729 | twilson | 2010-08-18 21:12:55 -0500 (Wed, 18 Aug 2010) | 2 lines
Add some documentation about codec negotiation to sip.conf
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@282751 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282302 | dvossel | 2010-08-13 17:23:38 -0500 (Fri, 13 Aug 2010) | 10 lines
remove current STUN support from chan_sip.c
This patch removes the current broken/useless stun
support from chan_sip.
(closes issue #17622)
Reported by: philipp2
Review: https://reviewboard.asterisk.org/r/855/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@282304 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282269 | dvossel | 2010-08-13 15:03:56 -0500 (Fri, 13 Aug 2010) | 4 lines
res_stun_monitor for monitoring network changes behind a NAT device
Review: https://reviewboard.asterisk.org/r/854
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@282270 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281687 | simon.perreault | 2010-08-11 09:30:59 -0400 (Wed, 11 Aug 2010) | 9 lines
Fix parsing of IPv6 address literals in outboundproxy
(closes issue #17757)
Reported by: oej
Patches:
17757.diff uploaded by sperreault (license 252)
sip.conf.diff uploaded by sperreault (license 252)
Tested by: oej
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@281688 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281650 | russell | 2010-08-10 16:47:31 -0500 (Tue, 10 Aug 2010) | 5 lines
Change the default value for alwaysauthreject in sip.conf to "yes".
(closes issue #17756)
Reported by: oej
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@281651 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281356 | simon.perreault | 2010-08-09 10:31:40 -0400 (Mon, 09 Aug 2010) | 2 lines
Added comment about IPv4-mapped IPv6 addresses and the output of netstat.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@281357 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r280777 | simon.perreault | 2010-08-03 15:53:07 -0400 (Tue, 03 Aug 2010) | 8 lines
Better documentation related to IPv6.
(closes issue #17737)
Reported by: oej
Patches:
doc.diff uploaded by sperreault (license 252)
Tested by: mmichelson
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@280779 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
properly.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@280745 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@280706 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277873 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277814 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277028 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@276951 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274283 | jpeeler | 2010-07-06 17:15:21 -0500 (Tue, 06 Jul 2010) | 7 lines
Correct sip.conf.sample comments for prematuremedia option.
(closes issue #17513)
Reported by: festr
Patches:
patch uploaded by festr (license 443)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274316 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Update note in sip.conf.sample about externip and externhost with STUN.
(closes issue #16323)
Reported by: klaus3000
Patches:
sip.conf.sample-patch.txt uploaded by klaus3000 (license 65)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@268988 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@267096 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
directmediapermit/directmediadeny support to restrict which peers can do
directmedia based on ip address. In some networks not all phones are fully
routed, i.e. not all phones can ping each other. This patch adds a way to
restrict directmedia for certain peers between certain networks.
(closes issue #16645)
Reported by: raarts
Patches:
directmediapermit.patch uploaded by raarts (license 937)
Tested by: raarts
Review: https://reviewboard.asterisk.org/r/467/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@264626 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@257032 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
sip.conf
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@255751 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #17021)
Reported by: kovzol
Tested by: lmadsen, kovzol, davidw, ebroad
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@255504 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This documentation associated wth tlsbindaddr is still useful so lets
synchronize it between trunk and 1.6.x branches.
(issue #17054)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@255066 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Update some confusing documentation for the tlsbindaddr
option in sip.conf.sample. Point at a link instead which
has better documentation.
(closes issue #17054)
Reported by: klaus3000
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@255021 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@254450 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@252089 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@249893 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
First off, these options weren't actually doing anything.
By the time the options were parsed, the peer and dialog
containers had already been allocated with their default
values.
Second, hash table size is something that doesn't really
make sense to change in a config file. If a user is that
interested in changing the hashtable size, he can modify
the source itself.
I have removed the parsing of the hash_peer, hash_user,
and hash_dialog options. I have removed the hash_user_size
variable altogether since it is not used at all. I also
changed hash_peer_size and hash_dialog_size to be constant,
and have changed the symbols to be in all caps as constants
typically are. I have also removed the entire section in
sip.conf.sample regarding configurable hashtable sizes.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@245192 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@240328 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #16411)
Reported by: stanusr
Patches:
__20091210-sip.conf.sample-documentation.txt uploaded by lmadsen (license 10)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@239520 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@238313 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235181 | jsmith | 2009-12-15 15:07:55 -0600 (Tue, 15 Dec 2009) | 4 lines
Add a line showing that we can use CIDR notation.
patch by jsmith, after discussion with jtodd
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@235298 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Internally the way T.38 is negotiated has changed and the option no longer
reflects a behavior that is valid. It will now look for a CNG tone on
received calls and if present send the call to the 'fax' extension. It is
then up to the application or channel to request the switch over to T.38.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@230881 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Just updating a spelling error and some capitalization in a
documentation update that Olle added. May the Swenglish be
with you.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@229639 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@229607 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@229606 f38db490-d61c-443f-a65b-d21fe96a405b
|