Age | Commit message (Collapse) | Author | Files | Lines |
|
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@225692 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue AST-29)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@224637 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Explains new options for detecting DTMF CID on fxo lines
(issue #9096)
Reported by: fleed
Patches:
chan_dahid_sample_config.patch uploaded by sum (license 766)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@224144 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
ISDN PTMP CPE spans.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@215757 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@214272 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@207095 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@206603 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@204749 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
GR-303.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@203402 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
the new skip category feature unless supported
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@200799 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
realize this was never done but was working anyways
also added support for skip category request feature of openr2 and updated chan_dahdi.conf.sample
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@200477 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197535 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197528 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
the sample configuration files.
(closes issue #15207)
Reported by: seandarcy
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197089 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@188342 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@182355 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175411 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@172400 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
ability.
(closes issue #14104)
Reported by: alecdavis
Patches:
asttrunk-14104.diff2.txt uploaded by dbailey (license )
chan_dahdi.rpas_and_fsk.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, dbailey
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@169277 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This prevents the situation when MWI messages are added to caller ID spills causing the channel to be hung up
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@169153 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
until the originating line hangs up.
(closes issue #12382)
Reported by: one47
Patches:
zap-waitfordialtone-trunk.080901.patch uploaded by one47 (license 23)
zap-waitfordialtone-bra-1.4.21.2.patch uploaded by fleed (license 463)
Tested by: fleed
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@159317 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@155671 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@155637 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
option for discard of remote hold messages, and using the alternate logical channel mapping in Q.SIG instead of the default physical channel mapping.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@150640 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135536 | russell | 2008-08-04 15:15:03 -0500 (Mon, 04 Aug 2008) | 2 lines
fix a config sample typo
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135537 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135473 | russell | 2008-08-04 11:26:17 -0500 (Mon, 04 Aug 2008) | 2 lines
Add a minor clarification to the documentation of mohinterpret and mohsuggest
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135474 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134401 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134086 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132641 | kpfleming | 2008-07-22 14:49:11 -0500 (Tue, 22 Jul 2008) | 2 lines
use renamed libpri API call for controlling this feature (was improperly named before)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@132643 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130039 | kpfleming | 2008-07-11 10:41:56 -0500 (Fri, 11 Jul 2008) | 4 lines
add support for a configuration parameter for 'inband audio during RELEASE', which is currently mandatory in libpri-1.4.4 but will become configurable in libpri-1.4.5 later today
(related to issue #13042)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130040 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
application in the dialplan. Also minor documentation update explaining how to setup multiple signalling links within a linkset
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128122 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@126675 f38db490-d61c-443f-a65b-d21fe96a405b
|