Age | Commit message (Collapse) | Author | Files | Lines |
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@326412 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325212 | rmudgett | 2011-06-28 12:30:16 -0500 (Tue, 28 Jun 2011) | 7 lines
Use the device name and not the channel name to initialize the device state.
Correct ASTERISK-11323 implementation as I don't see how it ever worked as
claimed when it used the channel name and not the device name.
(issue ASTERISK-11323)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@325213 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324174 | rmudgett | 2011-06-17 13:23:19 -0500 (Fri, 17 Jun 2011) | 5 lines
Add header string to libpri debug output.
Add header string to libpri debug output so the libpri output can be
found/extracted easier from huge debug trace files.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@324175 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@319427 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317479 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316224 | rmudgett | 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) | 16 lines
The dahdi_hangup() call does not clean up the channel fully.
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@316240 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r315001 | alecdavis | 2011-04-23 10:59:18 +1200 (Sat, 23 Apr 2011) | 12 lines
chan_dahdi: Can't return to normal ring after distinctive ring on FXS
clear a previous distinctivering pattern before each new call
(closes issue #18985)
Reported by: bromont
Patches:
bug18985.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, bromont
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@315002 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314735 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314732 | rmudgett | 2011-04-21 17:38:44 -0500 (Thu, 21 Apr 2011) | 1 line
Correct DAHDIShowChannels XML documentation.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314733 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@314116 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313780 | rmudgett | 2011-04-14 15:59:56 -0500 (Thu, 14 Apr 2011) | 20 lines
Leftover debug messages unconditionally sent to the console.
Executing Dial(DAHDI/1/18475551212,300,) with the echotraining config
option enabled outputs the following debug messages unconditionally:
Dialing T1847555121 on 1
Dialing www2w on 1
* Made debug messages in my_dial_digits() normal debug messages that do
not get output unless enabled.
* Reworded some debug messages in my_dial_digits() to be clearer.
* Replace strncpy() with ast_copy_string() in my_dial_digits() which does
the same job better.
(closes issue #18847)
Reported by: vmikhelson
Tested by: rmudgett
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313781 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #19076)
Reported by: lmadsen
Patches:
__20110408-channel-description.txt uploaded by lmadsen (license 10)
Tested by: lmadsen
Review: https://reviewboard.asterisk.org/r/1163/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313528 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
also went ahead and fixed the problem it introduces before committing.
........
r313435 | jrose | 2011-04-12 13:44:44 -0500 (Tue, 12 Apr 2011) | 1 line
fixing stupid mistake with putting code before variable declaration
........
Merged revisions 313433 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r313432 | jrose | 2011-04-12 13:12:29 -0500 (Tue, 12 Apr 2011) | 14 lines
reload Chan_dahdi memory leak caused by variables
chan_dahdi reloading with variables set via setvar in chan_dahdi.conf would
stay in the dahdi_pvt structs for individual channels (causing them to just
continue adding the new ones to the list) and also there was a memory leak
causes by the conf objects. This patch resolves both of these by using
ast_variables_destroy during the loading process.
(closes issue #17450)
Reported by: nahuelgreco
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: tilghman, jrose
Review: https://reviewboard.asterisk.org/r/1170/
........
........
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313437 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313190 | rmudgett | 2011-04-11 10:40:30 -0500 (Mon, 11 Apr 2011) | 39 lines
Merged revisions 313189 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313189 | rmudgett | 2011-04-11 10:32:53 -0500 (Mon, 11 Apr 2011) | 32 lines
Merged revisions 313188 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313188 | rmudgett | 2011-04-11 10:27:52 -0500 (Mon, 11 Apr 2011) | 25 lines
Stuck channel using FEATD_MF if caller hangs up at the right time.
The cause was actually a caller hanging up just at the end of the Feature
Group D DTMF tones that setup the call. The reason for this is a "guard
timer" that's implemented using ast_safe_sleep(100). If the caller
happens to hang up AFTER the final tone of the DTMF string but BEFORE the
end of that ast_safe_sleep(), then ast_safe_sleep() will return non-zero.
This causes the code to bounce to the end of ss_thread(), but it does NOT
tear down the call properly.
This should be a rare occurrence because the caller has to hang up at
EXACTLY the right time. Nonetheless, it was happening quite regularly on
the reporter's system. It's not easily reproducible, unless you purposely
increase the guard-time to 2000 or more. Once you do that, you can
reproduce it every time by watching the DTMF debug and hanging up just as
it ends.
Simply add an ast_hangup() before goto quit.
(closes issue #15671)
Reported by: jcromes
Patches:
issue15671.patch uploaded by pabelanger (license 224)
Tested by: jcromes
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313191 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Factor out the equivalent function for analog.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313100 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines
Crash if ISDN span layer 1 is down on initial load.
Regression from -r312575 B channel shifting during negotiation.
* Also combine updating the alarm flag with clearing the resetting flag.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@312950 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines
Merged revisions 312574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines
Merged revisions 312573 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines
Issues with ISDN calls changing B channels during call negotiations.
The handling of the PROCEEDING message was not using the correct call
structure if the B channel was changed. (The same for PROGRESS.) The call
was also not hungup if the new B channel is not provisioned or is busy.
* Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING,
PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are
using the correct structure and B channel. If there is any problem with
the operations then the call is now hungup with an appropriate cause code.
* Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the
correct structure by looking for the call and not using the channel ID.
NOTIFY is an exception with versions of libpri before v1.4.11 because a
call pointer is not available for Asterisk to use.
* Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find
the correct structure by looking for the call and not using the channel
ID.
(closes issue #18313)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2620
(closes issue #18231)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2924
(closes issue #18488)
Reported by: jpokorny
JIRA SWP-2929
JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.)
JIRA DAHDI-406
JIRA LIBPRI-33 (Stuck resetting flag likely fixed)
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@312579 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@312423 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@312384 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311874 | rmudgett | 2011-03-29 20:56:05 -0500 (Tue, 29 Mar 2011) | 1 line
Update some setup_dahdi_int() comments.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@311875 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309808 | tilghman | 2011-03-06 18:54:42 -0600 (Sun, 06 Mar 2011) | 14 lines
Merged revisions 309251 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@309809 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309720 | moy | 2011-03-05 12:44:30 -0500 (Sat, 05 Mar 2011) | 6 lines
Fix caller id passed to openr2_chan_make_call
(closes issue #18894)
Reported by: malufrj
Tested by: moy
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@309721 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines
Get real channel of a DAHDI call.
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@309446 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@308205 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
List the current mapping of DAHDI B channels to Asterisk channel names and
which calls are on hold or call-waiting. Calls on hold or call-waiting
are not associated with any B channel.
JIRA LIBPRI-27
JIRA SWP-2547
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@307964 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@307883 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306755 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306464 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306396 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #18556)
Reported by: kkm
Review: https://reviewboard.asterisk.org/r/1071/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306258 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r304341 | rmudgett | 2011-01-26 16:38:39 -0600 (Wed, 26 Jan 2011) | 7 lines
Add connected line chan_dahdi.conf pricpndialplan option.
* Added from_channel value to prilocaldialplan option.
JIRA ABE-2731
JIRA SWP-2842
..........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@304385 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304150 | rmudgett | 2011-01-26 13:39:35 -0600 (Wed, 26 Jan 2011) | 16 lines
Merged revisions 304149 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304149 | rmudgett | 2011-01-26 13:38:38 -0600 (Wed, 26 Jan 2011) | 9 lines
Merged revisions 304148 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r304148 | rmudgett | 2011-01-26 13:23:46 -0600 (Wed, 26 Jan 2011) | 2 lines
Update documentation for DAHDISendCallreroutingFacility() application.
..........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@304151 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines
Merged revisions 303769 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines
Merged revisions 303765 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
* Added diagnostic messages for deferred overlap digits handling corner
cases.
(closes issue #17085)
Reported by: shawkris
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@303772 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303467 | qwell | 2011-01-24 11:20:03 -0600 (Mon, 24 Jan 2011) | 22 lines
Merged revisions 303285 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303285 | qwell | 2011-01-21 15:48:09 -0600 (Fri, 21 Jan 2011) | 15 lines
Merged revisions 303284 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303284 | qwell | 2011-01-21 15:45:34 -0600 (Fri, 21 Jan 2011) | 8 lines
Reset configuration before parsing users.conf.
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
ASTNOW-125
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@303468 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@303376 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303286 | qwell | 2011-01-21 15:50:11 -0600 (Fri, 21 Jan 2011) | 22 lines
Merged revisions 303285 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303285 | qwell | 2011-01-21 15:48:09 -0600 (Fri, 21 Jan 2011) | 15 lines
Merged revisions 303284 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303284 | qwell | 2011-01-21 15:45:34 -0600 (Fri, 21 Jan 2011) | 8 lines
Reset configuration before parsing users.conf.
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
ASTNOW-125
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@303288 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301134 | rmudgett | 2011-01-07 19:11:31 -0600 (Fri, 07 Jan 2011) | 7 lines
The DTMF attended transfer feature cannot callback a chan_dahdi BRI phone.
The DAHDI ISDN channel name is not dialable.
Make a channel name like DAHDI/i3/400-12 dialable when the sequence number
is stripped off of the name.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@301135 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #18576)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@300345 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
hold.
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@300212 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
accepted
(closes issue #18438)
Reported by: mariner7
Tested by: moy
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@299493 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298195 | rmudgett | 2010-12-13 11:11:43 -0600 (Mon, 13 Dec 2010) | 33 lines
Merged revisions 298194 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298194 | rmudgett | 2010-12-13 11:04:41 -0600 (Mon, 13 Dec 2010) | 26 lines
Merged revisions 298193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298193 | rmudgett | 2010-12-13 10:56:07 -0600 (Mon, 13 Dec 2010) | 19 lines
Outgoing PRI/BRI calls cannot do DTMF triggered transfers.
Outgoing PRI/BRI calls cannot do DTMF triggered transfers if a PROCEEDING
message is not received. The debug output shows that the DTMF begin event
is seen, but the DTMF end event is missing. When the DTMF begin happens,
the call is muted so we now have one way audio (until a DTMF end event is
somehow seen).
* Made set the proceeding flag when the PRI_EVENT_ANSWER event is
received.
* Made absorb the DTMF begin and DTMF end events if we are overlap dialing
and have not seen a PROCEEDING message.
* Added a debug message when absorbing a DTMF event.
JIRA SWP-2690
JIRA ABE-2697
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@298201 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines
Merged revisions 296166 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines
Merged revisions 296165 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines
Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip.
The FXS connected phone has to have CW/CID support to fail, as it will
send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal
phone with no CID never fails. Also the SIP phone does not hear MOH when
the CW call is answered.
The DTMF end frame is suppressed when the phone acknowledges the CW signal
for CID. The problem is the DTMF begin frame needs to be suppressed as
well. The DTMF begin frame is causing SIP to start sending the DTMF RTP
frames. Since the DTMF end frame is suppressed, SIP will not stop sending
those DTMF RTP packets.
* Suppress the DTMF begin and end frames when the channel driver is
looking for DTMF digits.
* Fixed a couple issues caused by not cleaning up the CID spill if you
answer the CW call while it is sending the CID spill.
* Fixed not sending CW/CID spill to the phone when the call is natively
bridged. (Fixed by not using native bridge if CW/CID is possible.)
* Suppress received audio when sending CW/CID spills. The other parties
involved do not need to hear the CW/CID spills and may be confused if the
CW call is for them.
(closes issue #18129)
Reported by: alecdavis
Patches:
issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
NOTE:
* v1.4 does not have the main problem fixed by suppressing the DTMF start
frames. The other three items fixed are relevant.
* If you really must restore native bridging between analog ports, you
need to disable CW/CID either by configuring chan_dahdi.conf
callwaitingcallerid=no or dialing *70 before dialing the number to
temporarily disable CW.
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@296168 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295747 | rmudgett | 2010-11-19 21:11:15 -0600 (Fri, 19 Nov 2010) | 13 lines
One way audio before answering call waiting call on analog port.
* Analog call waiting Caller ID spills could get stuck resulting in one
way audio until the waiting call is answered. This only happens on the
second (and later) call waiting call if the active call is not the first
call.
* The CLI/AMI "dahdi show channel" command could report the wrong channel
information.
Must keep the struct analog_pvt.owner and struct dahdi_pvt.owner pointer
in sync.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@295748 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295516 | rmudgett | 2010-11-19 10:47:11 -0600 (Fri, 19 Nov 2010) | 13 lines
Bring sig_analog extraction more into alignment with orig-trunk/v1.6.2 chan_dahdi.
* Restore SMDI support.
* Fixed initial value of struct analog_pvt.use_callerid. It may get
forced on depending upon other config options.
* Call analog_dnd() instead of manual inlined code.
* Removed unused struct analog_pvt.usedistinctiveringdetection.
* Removed the struct analog_pvt.unknown_alarm flag. It was really the
struct analog_pvt.inalarm flag.
* Use ast_debug() instead of ast_log(LOG_DEBUG).
* Rename several function's index variable to idx.
* Some formatting tweaks.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@295517 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293807 | rmudgett | 2010-11-03 13:35:19 -0500 (Wed, 03 Nov 2010) | 34 lines
Merged revisions 293806 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293806 | rmudgett | 2010-11-03 13:31:57 -0500 (Wed, 03 Nov 2010) | 27 lines
Merged revisions 293805 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293805 | rmudgett | 2010-11-03 13:23:04 -0500 (Wed, 03 Nov 2010) | 20 lines
Party A in an analog 3-way call would continue to hear ringback after party C answers.
All parties are analog FXS ports.
1) A calls B.
2) A flash hooks to call C.
3) A flash hooks to bring C into 3-way call before C answers. (A and B hear ringback)
4) C answers
5) A continues to hear ringback during the 3-way call. (All parties can hear each other.)
* Fixed use of wrong variable in dahdi_bridge() that stopped ringback on
the wrong subchannel.
* Made several debug messages have more information.
A similar issue happens if B and C are SIP channels. B continues to hear
ringback. For some reason this only affects v1.8 and trunk.
* Don't start ringback on the real and 3-way subchannels when creating the
3-way conference. Removing this code is benign on v1.6.2 and earlier.
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293808 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293648 | rmudgett | 2010-11-02 16:29:25 -0500 (Tue, 02 Nov 2010) | 20 lines
Merged revisions 293647 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293647 | rmudgett | 2010-11-02 16:26:30 -0500 (Tue, 02 Nov 2010) | 13 lines
Merged revisions 293639 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293639 | rmudgett | 2010-11-02 16:24:13 -0500 (Tue, 02 Nov 2010) | 6 lines
Make warning message have more useful information in it.
Change "Unable to get index, and nullok is not asserted" to "Unable to get
index for '<channel-name>' on channel <number> (<function>(), line
<number>)".
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293649 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293530 | rmudgett | 2010-11-01 12:29:30 -0500 (Mon, 01 Nov 2010) | 10 lines
Analog 3-way call would not connect all parties if one was using sig_pri.
Also the "dahdi show channel" would not show the correct 3-way call
status.
* Synchronized the inthreeway flag between chan_dahdi and sig_analog.
* Fixed a my_set_linear_mode() sign error and made take an analog sub
channel enum.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293531 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293418 | rmudgett | 2010-10-29 20:53:29 -0500 (Fri, 29 Oct 2010) | 16 lines
Merged revisions 293417 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293417 | rmudgett | 2010-10-29 20:49:15 -0500 (Fri, 29 Oct 2010) | 9 lines
Merged revisions 293416 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293416 | rmudgett | 2010-10-29 20:45:49 -0500 (Fri, 29 Oct 2010) | 1 line
Remove some more code that serves no purpose.
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293419 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293341 | rmudgett | 2010-10-29 19:46:41 -0500 (Fri, 29 Oct 2010) | 16 lines
Merged revisions 293340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293340 | rmudgett | 2010-10-29 19:40:10 -0500 (Fri, 29 Oct 2010) | 9 lines
Merged revisions 293339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293339 | rmudgett | 2010-10-29 19:34:12 -0500 (Fri, 29 Oct 2010) | 1 line
Remove some code that serves no purpose.
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@293342 f38db490-d61c-443f-a65b-d21fe96a405b
|