aboutsummaryrefslogtreecommitdiffstats
path: root/UPGRADE.txt
AgeCommit message (Collapse)AuthorFilesLines
2009-07-23Use correct formatting for T.38 change note in UPGRADE.txtkpfleming1-9/+9
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@208502 f38db490-d61c-443f-a65b-d21fe96a405b
2009-07-23Merged revisions 208464 via svnmerge from kpfleming1-0/+12
https://origsvn.digium.com/svn/asterisk/trunk ........ r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines Rework of T.38 negotiation and UDPTL API to address interoperability problems Over the past couple of months, a number of issues with Asterisk negotiating (and successfully completing) T.38 sessions with various endpoints have been found. This patch attempts to address many of them, primarily focused around ensuring that the endpoints' MaxDatagram size is honored, and in addition by ensuring that T.38 session parameter negotiation is performed correctly according to the ITU T.38 Recommendation. The major changes here are: 1) T.38 applications in Asterisk (app_fax) only generate/receive IFP packets, they do not ever work with UDPTL packets. As a result of this, they cannot be allowed to generate packets that would overflow the other endpoints' MaxDatagram size after the UDPTL stack adds any error correction information. With this patch, the application is told the maximum *IFP* size it can generate, based on a calculation using the far end MaxDatagram size and the active error correction mode on the T.38 session. The same is true for sending *our* MaxDatagram size to the remote endpoint; it is computed from the value that the application says it can accept (for a single IFP packet) combined with the active error correction mode. 2) All treatment of T.38 session parameters as 'capabilities' in chan_sip has been removed; these parameters are not at all like audio/video stream capabilities. There are strict rules to follow for computing an answer to a T.38 offer, and chan_sip now follows those rules, using the desired parameters from the application (or channel) that wants to accept the T.38 negotiation. 3) chan_sip now stores and forwards ast_control_t38_parameters structures for tracking 'our' and 'their' T.38 session parameters; this greatly simplifies negotiation, especially for pass-through calls. 4) Since T.38 negotiation without specifying parameters or receiving the final negotiated parameters is not very worthwhile, the AST_CONTROL_T38 control frame has been removed. A note has been added to UPGRADE.txt about this removal, since any out-of-tree applications that use it will no longer function properly until they are upgraded to use AST_CONTROL_T38_PARAMETERS. Review: https://reviewboard.asterisk.org/r/310/ ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@208468 f38db490-d61c-443f-a65b-d21fe96a405b
2009-06-30Merged revisions 204563 via svnmerge from tilghman1-1/+3
https://origsvn.digium.com/svn/asterisk/trunk ................ r204563 | tilghman | 2009-06-30 15:41:04 -0500 (Tue, 30 Jun 2009) | 13 lines Merged revisions 204556 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r204556 | tilghman | 2009-06-30 15:23:51 -0500 (Tue, 30 Jun 2009) | 6 lines More incorrect language codes, plus ensuring that regionalizations use the specified language, and not English for grammar. (closes issue #15022) Reported by: greenfieldtech Patches: 20090519__issue15022.diff.txt uploaded by tilghman (license 14) ........ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@204581 f38db490-d61c-443f-a65b-d21fe96a405b
2009-06-30Recorded merge of revisions 204470 via svnmerge from tilghman1-0/+8
https://origsvn.digium.com/svn/asterisk/trunk ................ r204470 | tilghman | 2009-06-30 13:36:24 -0500 (Tue, 30 Jun 2009) | 18 lines Recorded merge of revisions 204469 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r204469 | tilghman | 2009-06-30 13:23:35 -0500 (Tue, 30 Jun 2009) | 11 lines "tw" is the language specification for Twi (from Ghana) not Taiwanese. (closes issue #15346) Reported by: volivier Patches: 20090617__issue15346__1.4.diff.txt uploaded by tilghman (license 14) 20090617__issue15346__trunk.diff.txt uploaded by tilghman (license 14) 20090617__issue15346__1.6.0.diff.txt uploaded by tilghman (license 14) 20090617__issue15346__1.6.1.diff.txt uploaded by tilghman (license 14) 20090617__issue15346__1.6.2.diff.txt uploaded by tilghman (license 14) Tested by: volivier ........ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@204471 f38db490-d61c-443f-a65b-d21fe96a405b
2008-11-21Merged revisions 158449 via svnmerge from kpfleming1-0/+11
https://origsvn.digium.com/svn/asterisk/trunk ........ r158449 | kpfleming | 2008-11-21 14:42:37 -0600 (Fri, 21 Nov 2008) | 3 lines as suggested by jtodd, document the purposes of the CHANGES and UPGRADE files ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@158451 f38db490-d61c-443f-a65b-d21fe96a405b
2008-11-19Merged revisions 157706 via svnmerge from kpfleming1-246/+23
https://origsvn.digium.com/svn/asterisk/trunk ........ r157706 | kpfleming | 2008-11-19 06:42:19 -0600 (Wed, 19 Nov 2008) | 5 lines make some corrections to the ast_agi_register_multiple(), ast_agi_unregister_multiple() and ast_agi_fdprintf() API calls to be consistent with API guidelines also, move UPGRADE.txt to UPGRADE-1.6.txt and make the new UPGRADE.txt contain information about upgrading between Asterisk 1.6 releases ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@157738 f38db490-d61c-443f-a65b-d21fe96a405b
2008-08-13Merged revisions 137627 via svnmerge from kpfleming1-1/+22
https://origsvn.digium.com/svn/asterisk/trunk ................ r137627 | kpfleming | 2008-08-13 17:33:32 -0500 (Wed, 13 Aug 2008) | 9 lines Merged revisions 137530 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r137530 | kpfleming | 2008-08-13 15:46:19 -0500 (Wed, 13 Aug 2008) | 1 line add document describing what users will need to be aware of when upgrading to this version and using DAHDI ........ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@137631 f38db490-d61c-443f-a65b-d21fe96a405b
2008-08-11Merged revisions 137203 via svnmerge from seanbright1-1/+2
https://origsvn.digium.com/svn/asterisk/trunk ........ r137203 | seanbright | 2008-08-11 10:25:15 -0400 (Mon, 11 Aug 2008) | 7 lines Log the userfield CDR variable like the other CDR backends, assuming the column is actually there. If it's not, we still log everything else as before. (closes issue #13281) Reported by: falves11 ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@137217 f38db490-d61c-443f-a65b-d21fe96a405b
2008-07-02Merged revisions 126226,126513 via svnmerge from seanbright1-0/+3
https://origsvn.digium.com/svn/asterisk/trunk ........ r126226 | seanbright | 2008-06-28 17:28:16 -0400 (Sat, 28 Jun 2008) | 8 lines Merge in changes from my cdr-tds-conversion branch. This changes the internal implementation from using the volatile libtds, to using the db-lib front end. The unintended side effect of this is that we support (at least) versions 0.62 through 0.82 of the FreeTDS distribution without any #ifdef ugliness. (closes issue #12844) Reported by: jcollie ........ r126513 | seanbright | 2008-06-30 07:57:42 -0400 (Mon, 30 Jun 2008) | 4 lines Cast a few more strings to char *, so that we can compile cleanly against FreeTDS 0.60. Update the docs to reflect that we can now compile and run against all modern releases of FreeTDS (0.60 through 0.82) ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@127397 f38db490-d61c-443f-a65b-d21fe96a405b
2008-06-11Merged revisions 121855 via svnmerge from tilghman1-0/+5
https://origsvn.digium.com/svn/asterisk/trunk ........ r121855 | tilghman | 2008-06-11 12:44:39 -0500 (Wed, 11 Jun 2008) | 3 lines Expand CDR uniqueid field to 150 chars, to account for maximum systemname. (Closes issue #12831) ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@121856 f38db490-d61c-443f-a65b-d21fe96a405b
2008-06-05Merged revisions 120567 via svnmerge from tilghman1-1/+15
https://origsvn.digium.com/svn/asterisk/trunk ........ r120567 | tilghman | 2008-06-05 09:35:47 -0500 (Thu, 05 Jun 2008) | 2 lines Add info on the [compat] section of asterisk.conf. ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@120568 f38db490-d61c-443f-a65b-d21fe96a405b
2008-05-05Merged revisions 115302 via svnmerge from tilghman1-0/+2
https://origsvn.digium.com/svn/asterisk/trunk ........ r115302 | tilghman | 2008-05-05 14:42:36 -0500 (Mon, 05 May 2008) | 2 lines Note change for ExecIf syntax (caught by jmls on IRC) ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@115303 f38db490-d61c-443f-a65b-d21fe96a405b
2008-05-05Merged revisions 115288 via svnmerge from kpfleming1-2/+2
https://origsvn.digium.com/svn/asterisk/trunk ........ r115288 | kpfleming | 2008-05-05 05:55:09 -0500 (Mon, 05 May 2008) | 2 lines clarify wording ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@115289 f38db490-d61c-443f-a65b-d21fe96a405b
2008-05-01Merged revisions 114931 via svnmerge from russell1-1/+6
https://origsvn.digium.com/svn/asterisk/trunk ........ r114931 | russell | 2008-05-01 12:28:25 -0500 (Thu, 01 May 2008) | 4 lines Clarify the deprecation notice about Macro() to note that it will not be removed for the sake of backwards compatibility, since it is a non-trivial task to convert existing large dialplans that depend on Macro() to use GoSub(), instead. ........ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@114932 f38db490-d61c-443f-a65b-d21fe96a405b
2008-03-26Merged revisions 111127 via svnmerge from kpfleming1-12/+5
https://origsvn.digium.com/svn/asterisk/trunk ................ r111127 | kpfleming | 2008-03-26 14:52:27 -0500 (Wed, 26 Mar 2008) | 18 lines Merged revisions 111126 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ................ r111126 | kpfleming | 2008-03-26 14:51:24 -0500 (Wed, 26 Mar 2008) | 10 lines Merged revisions 111125 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.2 ........ r111125 | kpfleming | 2008-03-26 14:49:30 -0500 (Wed, 26 Mar 2008) | 2 lines update UPGRADE notes to document usage of the script ........ ................ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@111128 f38db490-d61c-443f-a65b-d21fe96a405b
2008-03-26Merged revisions 110963 via svnmerge from kpfleming1-1/+3
https://origsvn.digium.com/svn/asterisk/trunk ................ r110963 | kpfleming | 2008-03-26 12:44:09 -0500 (Wed, 26 Mar 2008) | 10 lines Merged revisions 110962 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r110962 | kpfleming | 2008-03-26 12:43:02 -0500 (Wed, 26 Mar 2008) | 2 lines add note that the user will need to enable codec_ilbc to get it to build ........ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@110964 f38db490-d61c-443f-a65b-d21fe96a405b
2008-03-26Merged revisions 110881 via svnmerge from kpfleming1-0/+18
https://origsvn.digium.com/svn/asterisk/trunk ................ r110881 | kpfleming | 2008-03-26 10:10:28 -0700 (Wed, 26 Mar 2008) | 18 lines Merged revisions 110880 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ................ r110880 | kpfleming | 2008-03-26 09:42:35 -0700 (Wed, 26 Mar 2008) | 10 lines Merged revisions 110869 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.2 ........ r110869 | kpfleming | 2008-03-26 08:53:46 -0700 (Wed, 26 Mar 2008) | 2 lines due to licensing restrictions, we cannot distribute the source code for iLBC encoding and decoding... so remove it, and add instructions on how the user can obtain it themselves ........ ................ ................ git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@110882 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-25Deprecate the "stripmsd" option in favor of dialplan substring variable syntax.russell1-0/+3
(closes issue #12060) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@104110 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-22Move Originate to a separate privilege and require the additional System ↵tilghman1-0/+3
privilege to call out to a subshell. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@104039 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-19Add CHANNELREDIRECT_STATUS variable to ChannelRedirect() dialplan ↵file1-0/+3
application. This will either be set to NOCHANNEL if the given channel was not found or SUCCESS if it worked. (closes issue #11553) Reported by: johan Patches: UPGRADE.txt.channelredirect.patch uploaded by johan (license 334) CHANGES.channelredirect.patch uploaded by johan (license 334) app_channelredirect-20080219.patch uploaded by johan (license 334) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103819 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-14Change the queue holdtime announcement to happen at any interval (not just ↵mmichelson1-0/+3
greater than two minutes). Remove the saying of less-than for holdtime announcements since it can lead to awkward holdtime announcements. Using '1' as a queue-round-seconds value is no longer valid. (closes issue #9736) Reported by: caio1982 Patches: queue_announce5.diff uploaded by caio1982 (license 22) Tested by: caio1982, putnopvut git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103687 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-131. Deprecate SetMusicOnHold and WaitMusicOnHold.mmichelson1-0/+5
2. Add a duration parameter to MusicOnHold (closes issue #11904) Reported by: dimas Patches: v2-moh.patch uploaded by dimas (license 88) Tested by: dimas git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103658 f38db490-d61c-443f-a65b-d21fe96a405b
2008-02-08At the request of ManxPower, include the UPGRADE.txt from 1.2 and 1.4, as well.russell1-1/+7
This way, if people need to go back and review what was deprecated in previous major releases, it is readily available to them. Thanks for the suggestion! git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103044 f38db490-d61c-443f-a65b-d21fe96a405b
2008-01-05Add a note about changing modules.conf since another console channel driver isrussell1-0/+7
now present that can not be used at the same time as chan_alsa or chan_oss. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@96715 f38db490-d61c-443f-a65b-d21fe96a405b
2007-12-16HUGE improvements to QoS/CoS handling by IgorGoej1-0/+3
- Refer to the proper documentation - Implement separate signalling/media QoS/CoS in many channels using RTP - Improve warnings and verbose messages - Deprecate some old settings Minor modifications by me, a big effort from IgorG. Thanks! Reported by: IgorG Patches: qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20) Tested by: IgorG (closes issue #11145) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93163 f38db490-d61c-443f-a65b-d21fe96a405b
2007-12-14Remove use of privacy.conf by the Privacy app.tilghman1-0/+2
Reported by: eliel Patch by: eliel (Closes issue #11344) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93066 f38db490-d61c-443f-a65b-d21fe96a405b
2007-12-06Adding documentation for the massive manager changes to manageroej1-3/+2
version 1.1 - hopefully a more consistent manager interface. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@91438 f38db490-d61c-443f-a65b-d21fe96a405b
2007-12-05Change cdr_manager to use a "CDR" level, rather than the (overcrowded) ↵tilghman1-0/+4
"call" level. (Closes issue #11015) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@91173 f38db490-d61c-443f-a65b-d21fe96a405b
2007-12-05Rename "username" to "defaultuser" to match with "defaultip".oej1-0/+5
"Username" still works, but is deprecated. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@91152 f38db490-d61c-443f-a65b-d21fe96a405b
2007-11-26- Mark "concise" as deprecatedoej1-2/+9
- Restructure other changes to UPGRADE.txt and CHANGES We're still looking for scripts that replace asterisk -rx "show shannels concise" by using the manager interface, but still produces the same output. Anyone? git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89606 f38db490-d61c-443f-a65b-d21fe96a405b
2007-11-21Change Read to set READSTATUS as an indication of the resulttilghman1-0/+3
Also, some cleanup to CHANGES. Reported by: michael-fig Patch by: michael-fig,tilghman (Closes issue #11004) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89489 f38db490-d61c-443f-a65b-d21fe96a405b
2007-11-15Fix typo in UPGRADE.txt. 'increase' should have been used, not 'increasing'.file1-1/+1
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89291 f38db490-d61c-443f-a65b-d21fe96a405b
2007-11-01Convert cdr_odbc to use res_odbc managed connectionstilghman1-0/+4
Closes issue #10614 git-svn-id: http://svn.digium.com/svn/asterisk/trunk@88182 f38db490-d61c-443f-a65b-d21fe96a405b
2007-10-29Adding the more flexible QUEUE_MEMBER function to replace the ↵mmichelson1-0/+5
QUEUE_MEMBER_COUNT function. A deprecation notice will be issued the first time QUEUE_MEMBER_COUNT is used. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@87395 f38db490-d61c-443f-a65b-d21fe96a405b
2007-10-15Switch dundi to new tos config format.qwell1-6/+10
Remove old unused defines for old style. Closes issue 10860, patch by IgorG. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@85764 f38db490-d61c-443f-a65b-d21fe96a405b
2007-09-10Change the IAXPeers command to have manager-style output, instead of ↵tilghman1-0/+5
CLI-style output (closes issue #8254) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@82200 f38db490-d61c-443f-a65b-d21fe96a405b
2007-08-28Support better rotation of log files to be more like system logging (closes ↵tilghman1-0/+4
issue #10398) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@81277 f38db490-d61c-443f-a65b-d21fe96a405b
2007-08-15This commit closes bug 7605, and half-closes 7638. The AEL code has been ↵murf1-0/+4
redistributed/repartitioned to allow code re-use both inside and outside of Asterisk. This commit introduces the utils/conf2ael program, and an external config-file reader, for both normal config files, and for extensions.conf (context, exten, prio); It provides an API for programs outside of asterisk to use to play with the dialplan and config files. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@79595 f38db490-d61c-443f-a65b-d21fe96a405b
2007-07-31Add func_lock, which creates dialplan mutexes, and note that the Macro apps ↵tilghman1-0/+5
are now deprecated. (Closes issue #10264) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@77834 f38db490-d61c-443f-a65b-d21fe96a405b
2007-07-23Missed one conversion to comma delimiter (thanks, Juggie) and add ↵tilghman1-0/+4
documentation on the change to the Local channel name. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@76704 f38db490-d61c-443f-a65b-d21fe96a405b
2007-07-23Merge the dialplan_aesthetics branch. Most of this patch simply converts ↵tilghman1-0/+10
applications using old methods of parsing arguments to using the standard macros. However, the big change is that the really old way of specifying application and arguments separated by a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar). git-svn-id: http://svn.digium.com/svn/asterisk/trunk@76703 f38db490-d61c-443f-a65b-d21fe96a405b
2007-07-05In regards to changes for 9508, expr2 system choking on floating point ↵murf1-0/+5
numbers, I'm adding this update to round out (no pun intended) and make this FP-capable version of the Expr2 stuff interoperate better with previous integer-only usage, by providing Functions syntax, with 20 builtin functions for floating pt to integer conversions, and some general floating point math routines that might commonly be used also. Along with this, I made it so if a function was not a builtin, it will try and find it in the ast_custom_function list, and if found, execute it and collect the results. Thus, you can call system functions like CDR(), CHANNEL(), etc, from within $\[..\] exprs, without having to wrap them in $\{...\} (curly brace) notation. Did a valgrind on the standalone and made sure there's no mem leaks. Looks good. Updated the docs, too. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@73449 f38db490-d61c-443f-a65b-d21fe96a405b
2007-07-02Merged revisions 72933 via svnmerge from murf1-0/+6
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r72933 | murf | 2007-07-02 14:16:31 -0600 (Mon, 02 Jul 2007) | 1 line support for floating point numbers added to ast_expr2 $\[...\] exprs. Fixes bug 9508, where the expr code fails with fp numbers. The MATH function returns fp numbers by default, so this fix is considered necessary. ........ git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72940 f38db490-d61c-443f-a65b-d21fe96a405b
2007-06-19Moved those comments from UPGRADE.txt to CHANGES. Ooops.murf1-7/+0
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@70141 f38db490-d61c-443f-a65b-d21fe96a405b
2007-06-19Some UPGRADE.txt comments to cover some enhancements added today.murf1-0/+7
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@70140 f38db490-d61c-443f-a65b-d21fe96a405b
2007-06-11Issue 8971 - Allow DISA input to be ended with a '#'.tilghman1-0/+3
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@68854 f38db490-d61c-443f-a65b-d21fe96a405b
2007-05-04Added a small bit of code to support the SNOM 360's Record button. Made the ↵murf1-0/+11
find_feature func in res_features.c public, so I could use it to find the automon dial sequence as configured by the user. When the INFO packet has a Record: header with on/off, the sequence is sent as consecutive DTMF frames on the phone's channel, triggering the automon functionality. The user has to configure the automon in features.conf, and set up his dialplan accordingly. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@63046 f38db490-d61c-443f-a65b-d21fe96a405b
2007-04-28Merge changes from team/russell/eventsrussell1-1/+12
This set of changes introduces a new generic event API for use within Asterisk. I am still working on a way for events to be shared between servers, but this part is ready and can already be used inside of Asterisk. This set of changes introduces the first use of the API, as well. I have restructured the way that MWI (message waiting indication) is handled. It is now event based instead of polling based. For example, if there are a bunch of SIP phones subscribed to mailboxes, then chan_sip will not have to constantly poll the mailboxes for changes. app_voicemail will generate events when changes occur. See UPGRADE.txt and CHANGES for some more information on the effects of these changes from the user perspective. For developer information, see the text in include/asterisk/event.h. As always, additional feedback is welcome on the asterisk-dev mailing list. git-svn-id: http://svn.digium.com/svn/asterisk/trunk@62292 f38db490-d61c-443f-a65b-d21fe96a405b
2007-04-09updated UPGRADE.txt to include format_wav changesdhubbard1-0/+8
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@60917 f38db490-d61c-443f-a65b-d21fe96a405b
2007-03-13Merge changes from team/russell/sqlite:russell1-0/+6
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a SQLite3 database. (issue #7149, alerios) * Add new module, res_config_sqlite, which adds realtime database configuration support for SQLite version 2. I decided that this was ok since we didn't have any realtime support for version 3. If someone ports this to version 3, then version 2 support can be removed or marked deprecated. (issue #7790, rbarun_proformatique) * Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom. Also, note that there were other modules on the bug tracker that did not make the cut because they provided some duplicated functionality. Those are: * cdr_sqlite3 (issue #6754, moy) * cdr_sqlite3 (issue #8694, bsd) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@58866 f38db490-d61c-443f-a65b-d21fe96a405b
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 10:18:59 +0000