| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
prepending.
ABE-2654
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296868 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This mainly deals with the problem of constructors on platforms where an
explicit constructor order cannot be specified (any system with gcc 4.2
or less). However, this is only a problem on those systems where we need
to initialize mutexes with a constructor, because we have other code that
also relies upon constructors, and we cannot specify that mutexes are
initialized first (and destroyed last).
There are two approaches to dealing with this issue, related to whether the
code exists in the core Asterisk binary or in a separate code module. In the
core case, constructors are run immediately upon load, and the file_versions
list mutex needs to be already initialized, as it is referenced in the first
constructor within each core source file. In this case, we use pthread_once
to ensure that the mutex is initialized immediately before it is used for the
first time. The only caveat is that the mutex is not ever destroyed, but
because this is the core, it makes no real difference; the only time when
destruction is safe would be just prior to process destruction, which takes
care of that anyway. And due to using pthread_once, the mutex will never be
reinitialized, which means only one structure has leaked at the end of the
process. Hence, it is not a problematic leak.
The second approach is to use the load_module and unload_module routines,
which, for obvious reasons, exist only in loadable modules. In this second
case, we don't have a problem with the constructors, but only with destructor
order, because mutexes can be destroyed before their final usage is employed.
However, we need the mutexes to still be destroyed, in certain scenarios: if
the module is unloaded prior to the process ending, it should be clean, with
no allocations by the module hanging around after that point in time.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296867 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #18398)
Reported by: pabelanger
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296670 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #18355)
Reported by: oej
Patch by: oej
Much help from Peter Lindahl. Testing by the ClearIT team during a coffee break.
Review: https://reviewboard.asterisk.org/r/1033/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296309 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Since we might not put a new translation path on the channel, go ahead and
set it to NULL right after destroying the old one to ensure we don't try
to free an invalid translation path later on.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296213 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The FXS connected phone has to have CW/CID support to fail, as it will
send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal
phone with no CID never fails. Also the SIP phone does not hear MOH when
the CW call is answered.
The DTMF end frame is suppressed when the phone acknowledges the CW signal
for CID. The problem is the DTMF begin frame needs to be suppressed as
well. The DTMF begin frame is causing SIP to start sending the DTMF RTP
frames. Since the DTMF end frame is suppressed, SIP will not stop sending
those DTMF RTP packets.
* Suppress the DTMF begin and end frames when the channel driver is
looking for DTMF digits.
* Fixed a couple issues caused by not cleaning up the CID spill if you
answer the CW call while it is sending the CID spill.
* Fixed not sending CW/CID spill to the phone when the call is natively
bridged. (Fixed by not using native bridge if CW/CID is possible.)
* Suppress received audio when sending CW/CID spills. The other parties
involved do not need to hear the CW/CID spills and may be confused if the
CW call is for them.
(closes issue #18129)
Reported by: alecdavis
Patches:
issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
NOTE:
* v1.4 does not have the main problem fixed by suppressing the DTMF start
frames. The other three items fixed are relevant.
* If you really must restore native bridging between analog ports, you
need to disable CW/CID either by configuring chan_dahdi.conf
callwaitingcallerid=no or dialing *70 before dialing the number to
temporarily disable CW.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296165 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
In the case that the native format was able to be changed to match the
new requested format, the code proceeded to attempt to build a translation
path, anyway. The result would be NULL, since no translation path is
necessary and resulted in this function thinking an error has occurred.
This case is now specifically caught and no attempt to build a translation
path is attempted.
Thanks to our automated tests and bamboo.asterisk.org for catching this problem
and making a whole lot of noise when things started failing. :-)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296082 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@296000 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #18353)
Reported by: oej
Review: https://reviewboard.asterisk.org/r/1031/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295906 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295790 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This is not a perfect solution as headers that are joined via commas are not
detected. This is a parsing issue that to fix "correctly" would necessitate
a new SIP parser.
Review: https://reviewboard.asterisk.org/r/1019/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295628 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295553 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Add the ability to play a sound file, listen for more than just one digit, specify
escape characters. Backwards compatible (to work with only timeout specified).
(closes issue #15531)
Reported by: diLLec
Patches:
asterisk-res_agi-203638-patched.patch uploaded by diLLec (license 839)
Tested by: diLLec, espiceland
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295552 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295280 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
It seems the fix to issue 17103 was a little overzealous and removed the code
that backed up the textfile containing the original message duration. This
code has now been restored.
(related to issue #17103)
ABE-2654
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295200 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
revert before commit.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295031 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@295026 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
In order to be more safe, some error handling code was changed to respect more
error conditions including the potential memory allocation failure for deleted
and heard message tracking introduced in 293004. However, last_message_index
returns -1 for zero messages (perhaps as expected) and was triggering the
stricter error checking. Because last_message_index is only called directly
in one place, just return 0 from open_mailbox (for file based storage) when no
messages are detected unless a real error has occurred.
(closes issue #18240)
Reported by: leobrown
Patches:
bug18240.1-6-2.diff.txt uploaded by alecdavis (license 585)
Tested by: pabelanger
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294903 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
seconds.
Asterisk is just whining too much with this message: "No D-channels
available! Using Primary channel XXX as D-channel anyway!".
Filtered the message so it only comes out once if there is no D channel
available without an intervening D channel available period.
(closes issue #17270)
Reported by: jmls
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294821 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294739 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time. This
scenario has the potential to progress to the point of saturating a link just
from options packets. The fix was to ensure that the poke scheduler checks to
see if a peer is in the peer list before continuing to poke. The reason a peer
must be in the peer list to be able to properly manage an options dialog is
because otherwise the call pointer is lost when the peer is regenerated from
the database, which is how existing qualify dialogs are detected.
(closes issue #16382)
Reported by: lftsy
Patches:
bug16382-3.patch uploaded by jpeeler (license 325)
Tested by: zerohalo
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294688 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294641 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Copied from some notes from the original author (Russell):
Deadlock scenario:
Thread 1: device state change thread
Holds - rdlock on contexts
Holds - hints lock
Waiting on channels container lock
Thread 2: SIP monitor thread
Holds the "iflock"
Holds a sip_pvt lock
Holds channel container lock
Waiting for a channel lock
Thread 3: A channel thread (chan_local in this case)
Holds 2 channel locks acquired within app_dial
Holds a 3rd channel lock it got inside of chan_local
Holds a local_pvt lock
Waiting on a rdlock of the contexts lock
A bunch of other threads waiting on a wrlock of the contexts lock
To address this deadlock, some locking order rules must be put in place and
enforced. Existing relevant rules:
1) channel lock before a pvt lock
2) contexts lock before hints lock
3) channels container before a channel
What's missing is some enforcement of the order when you involve more than any
two. To fix this problem, I put in some code that ensures that (at least in the
code paths involved in this bug) the locks in (3) come before the locks in (2).
To change the operation of thread 1 to comply, I converted the storage of hints
to an astobj2 container. This allows processing of hints without holding the
hints container lock. So, in the code path that led to thread 1's state, it no
longer holds either the contexts or hints lock while it attempts to lock the
channels container.
(closes issue #18165)
Reported by: antonio
ABE-2583
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294384 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
scheduler entries if we get a new 491.
This prevents a scheduler entry from leaking if we receive a 491 response when one is pending. If a scheduler entry leaks, the pvt it is associated my get destroyed before the scheduler entry fires, and then memory corruption and crashes can occur when the scheduled reinvite attempts to access and modify the memory of the destroyed pvt.
ABE-2543
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@294163 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
sizes.
dahdi-linux 2.4.0 (specifically commit 9034) added the capability for
the wctc4xxp to return more than a single packet of data in response to
a read. However, when decoding packets, codec_dahdi was still assuming
that the default number of samples was in each read.
In other words, each packet your provider sent you, regardless of size,
would result in 20 ms of decoded data (30 ms if decoding G723). If your
provider was sending 60 ms packets then codec_dahdi would end up
stripping 40 ms of data from each transcoded frame resulting in "choppy"
audio.
This would only affect systems where G729 packets are arriving in sizes
greater than 20ms or G723 packets arriving in sizes greater than 30ms.
DAHDI-744.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293968 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
ABE-2168
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293922 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
C answers.
All parties are analog FXS ports.
1) A calls B.
2) A flash hooks to call C.
3) A flash hooks to bring C into 3-way call before C answers. (A and B hear ringback)
4) C answers
5) A continues to hear ringback during the 3-way call. (All parties can hear each other.)
* Fixed use of wrong variable in dahdi_bridge() that stopped ringback on
the wrong subchannel.
* Made several debug messages have more information.
A similar issue happens if B and C are SIP channels. B continues to hear
ringback. For some reason this only affects v1.8 and trunk.
* Don't start ringback on the real and 3-way subchannels when creating the
3-way conference. Removing this code is benign on v1.6.2 and earlier.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293805 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When setting to zero/"no", the numeric default was shown making it not obvious
the disabled setting was respected.
(closes issue #18123)
Reported by: zerohalo
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293722 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Change "Unable to get index, and nullok is not asserted" to "Unable to get
index for '<channel-name>' on channel <number> (<function>(), line
<number>)".
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293639 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293416 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293339 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Reported (though the reporter did not understand he was reporting a bug) on the asterisk-users list:
http://lists.digium.com/pipermail/asterisk-users/2010-October/255505.html
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293194 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
The comparison function logic was off, so the number of sessions for a given
mailbox were not being incremented properly. This problem caused the maximum
number of messages per folder to not be respected when simultaneously leaving
multiple voicemails just below the threshold.
These problems should be fixed by the above, but just in case:
Fixed resequence_mailbox to rely on the actual number of detected number of
files in a directory rather than just assuming only 10 messages more than the
maximum had been left. Also if more messages than the maximum are deleted they
are actually removed now.
The second purpose of this commit should have been separated out probably, but
is related to the above. Again, if the number of messages in a given voicemail
folder exceeds the maximum set limit make sure to allocate enough space for the
deleted and heard index tracking array.
A few random fixes:
There was a forgotten decrement of the inprocess count in imap_store_file.
When using IMAP storage, do not look in the directory where file based storage
messages may still reside and influence the message count.
Ensure to use only the first format in sendmail.
ABE-2516
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@293004 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
chan_local does some dangerous things involving deadlock avoidance.
tech_pvt functions like hangup and queue_frame are provided with a
locked channel upon entry. Those functions are completely safe as
long as you don't attempt to give up that channel lock, but that is
impossible to guarantee due to the required deadlock avoidance necessary
to lock both the tech_pvt and both channels involved.
In the past, we have tried to account for this by doing things like
setting a "glare" flag that indicates what function should destroy the
pvt. This was used in local_hangup and local_queue_frame to decided
who should destroy the pvt if they collided in separate threads. I
have removed the need to do this by converting all chan_local tech_pvts
to astobj2. This means we can ref a pvt before deadlock avoidance
and not have to worry about that pvt possibly getting destroyed under
us. It also cleans up where we destroy the tech_pvt. The only unlink
from the tech_pvt container occurs in local_hangup now, which is where
it should occur.
Since there still may be thread collisions on some functions like
local_hangup after deadlock avoidance, I have added some checks to detect
those collisions and exit appropriately. I think this patch is going to
solve quite a bit of weirdness we have had with local channels in the past.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@292866 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This removes the gsm->sln step when transcoding
priv-recordintro.
(closes issue #18176)
Reported by: pabelanger
Patches:
chan_sip.diff uploaded by pabelanger (license 224)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@292411 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This is a fix for when pressing the operator key after recording an unavailable,
busy, name, or temporary message in mailbox options. The operator key should not
be accepted here, but should be allowed during the message recording. If the
operator key is pressed during ensure the file is saved or deleted as
apporopriate. Also, ensure removal of temporary recorded files after an early
hang up or when message acceptance confirmation times out.
ABE-2518
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@292223 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #17426)
Reported by: camsown
Patches:
core-sounds-en_AU.txt uploaded by camsown (license 1050)
add_AU_sounds.patch.txt uploaded by lmadsen (license 10)
Tested by: camsown, lmadsen, jtodd, qwell
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@292222 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291938 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291862 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
There is a deadlock between dahdi_exception() and dahdi_indicate() for
analog ports. The call-waiting and three-way-calling feature can
experience deadlock if these features are trying to do something and an
event from the bridged channel happens at the same time.
Deadlock avoidance code added to obtain necessary channel locks before
attemting an operation with call-waiting and three-way-calling.
(closes issue #16847)
Reported by: shin-shoryuken
Patches:
issue_16847_v1.4.patch uploaded by rmudgett (license 664)
issue_16847_v1.6.2.patch uploaded by rmudgett (license 664)
issue_16847_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/971/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291643 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
When an outgoing call is answered and hung up by the far end *very* quickly, we
may not read any frames and therefor end up with a call that displays the wrong
disposition/DIALSTATUS. The reason is because ast_queue_hangup() immediately
sets the _softhangup flag on the channel and then queues the HANGUP control
frame, but __ast_read refuses to read any frames if ast_check_hangup() indicates
that a hangup request has been made (which it will if _softhangup is set). So,
we end up losing control frames.
This change makes __ast_read continue to read frames even if a soft hangup has
been requested. It queues a hangup frame to make sure that __ast_read() will
still eventually return NULL.
Much thanks to David Vossel for all of the reviews, discussion, and help!
(closes issue #16946)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/740/
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291577 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This fixes a crash due to a hangup race condition.
ABE-2601
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291392 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291263 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@291109 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290862 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Use the directories found for the parent when using lib dependencies.
(closes issue #17314)
Reported by: tzafrir
Patches:
17314-withdeps.diff uploaded by qwell (license 4)
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290750 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(closes issue #17387)
Reported by: jmls
Patches:
20100726__issue17387.diff.txt uploaded by tilghman (license 14)
Tested by: jmls
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290392 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/trunk
..........
r258974 | diruggles | 2010-04-26 14:05:47 -0500 (Mon, 26 Apr 2010) | 4 lines
Line 24 missed in compatibility fix in revision 233577
added a "fun:" prefix line 24
..........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290323 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290177 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
makeopts settings change.
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@290100 f38db490-d61c-443f-a65b-d21fe96a405b
|
