diff options
Diffstat (limited to 'trunk/configs/sla.conf.sample')
| -rw-r--r-- | trunk/configs/sla.conf.sample | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/trunk/configs/sla.conf.sample b/trunk/configs/sla.conf.sample new file mode 100644 index 000000000..75acc2bc4 --- /dev/null +++ b/trunk/configs/sla.conf.sample @@ -0,0 +1,140 @@ +; +; Configuration for Shared Line Appearances (SLA). +; +; See doc/asterisk.pdf for more information. +; + +; ---- General Options ---------------- +[general] + +;attemptcallerid=no ; Attempt CallerID handling. The default value for this + ; is "no" because CallerID handling with an SLA setup is + ; known to not work properly in some situations. However, + ; feel free to enable it if you would like. If you do, and + ; you find problems, please do not report them. +; ------------------------------------- + + +; ---- Trunk Declarations ------------- +; +;[line1] ; Provide a name for this trunk. + +;type=trunk ; This line is what marks this entry as a trunk. + +;device=Zap/3 ; Map this trunk declaration to a specific device. + ; NOTE: You can not just put any type of channel here. + ; Zap channels can be directly used. IP trunks + ; require some indirect configuration which is + ; described in doc/asterisk.pdf. + +;autocontext=line1 ; This supports automatic generation of the dialplan entries + ; if the autocontext option is used. Each trunk should have + ; a unique context name. Then, in zapata.conf, this device + ; should be configured to have incoming calls go to this context. + +;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging + ; it up as an unanswered call. The value is in seconds. + +;barge=no ; If this option is set to "no", then no station will be + ; allowed to join a call that is in progress. The default + ; value is "yes". + +;hold=private ; This option configure hold permissions for this trunk. + ; "open" - This means that any station can put this trunk + ; on hold, and any station can retrieve it from + ; hold. This is the default. + ; "private" - This means that once a station puts the + ; trunk on hold, no other station will be + ; allowed to retrieve the call from hold. + +;[line2] +;type=trunk +;device=Zap/4 +;autocontext=line2 + +;[line3] +;type=trunk +;device=Zap/3 +;autocontext=line3 + +;[line4] +;type=trunk +;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa + ; application can be used to support IP trunks. + ; See doc/asterisk.pdf on more information on how + ; IP trunks work. +;autocontext=line4 +; -------------------------------------- + + +; ---- Station Declarations ------------ + +;[station1] ; Define a name for this station. + +;type=station ; This line indicates that this entry is a station. + +;device=SIP/station1 ; Each station must be mapped to a device. + +;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if + ; the autocontext option is used. All stations can use the same + ; context without conflict. The device for this station should + ; have its context configured to the same one listed here. + +;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an + ; incoming call, in seconds. + +;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station + ; once there is an incoming call, in seconds. + +;hold=private ; This option configure hold permissions for this station. Note + ; that if private hold is set in the trunk entry, that will override + ; anything here. However, if a trunk has open hold access, but this + ; station is set to private hold, then the private hold will be in + ; effect. + ; "open" - This means that once this station puts a call + ; on hold, any other station is allowed to retrieve + ; it. This is the default. + ; "private" - This means that once this station puts a + ; call on hold, no other station will be + ; allowed to retrieve the call from hold. + + +;trunk=line1 ; Individually list all of the trunks that will appear on this station. This + ; order is significant. It should be the same order as they appear on the + ; phone. The order here defines the order of preference that the trunks will + ; be used. +;trunk=line2 +;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk. + ; If a ring delay is specified both for the whole station and for a specific + ; trunk on a station, the setting for the specific trunk will take priority. + ; This value is in seconds. + +;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk. + ; If a ring timeout is specified both for the whole station and for a specific + ; trunk on a station, the setting for the specific trunk will take priority. + ; This value is in seconds. + + +;[station](!) ; When there are a lot of stations that are configured the same way, + ; it is convenient to use a configuration template like this so that + ; the common settings stay in one place. +;type=station +;autocontext=sla_stations +;trunk=line1 +;trunk=line2 +;trunk=line3 +;trunk=line4 + +;[station2](station) ; Define a station that uses the configuration from the template "station". +;device=SIP/station2 +; +;[station3](station) +;device=SIP/station3 +; +;[station4](station) +;device=SIP/station4 +; +;[station5](station) +;device=SIP/station5 +; -------------------------------------- + |