diff options
Diffstat (limited to 'trunk/configs/oss.conf.sample')
-rw-r--r-- | trunk/configs/oss.conf.sample | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/trunk/configs/oss.conf.sample b/trunk/configs/oss.conf.sample new file mode 100644 index 000000000..24b0b38ee --- /dev/null +++ b/trunk/configs/oss.conf.sample @@ -0,0 +1,138 @@ +; +; Automatically generated from ../channels/chan_oss.c +; + +[general] + ; General config options, with default values shown. + ; You should use one section per device, with [general] being used + ; for the first device and also as a template for other devices. + ; + ; All but 'debug' can go also in the device-specific sections. + ; + ; debug = 0x0 ; misc debug flags, default is 0 + + ; Set the device to use for I/O + ; device = /dev/dsp + + ; Optional mixer command to run upon startup (e.g. to set + ; volume levels, mutes, etc. + ; mixer = + + ; Software mic volume booster (or attenuator), useful for sound + ; cards or microphones with poor sensitivity. The volume level + ; is in dB, ranging from -20.0 to +20.0 + ; boost = n ; mic volume boost in dB + + ; Set the callerid for outgoing calls + ; callerid = John Doe <555-1234> + + ; autoanswer = no ; no autoanswer on call + ; autohangup = yes ; hangup when other party closes + ; extension = s ; default extension to call + ; context = default ; default context for outgoing calls + ; language = "" ; default language + + ; If you set overridecontext to 'yes', then the whole dial string + ; will be interpreted as an extension, which is extremely useful + ; to dial SIP, IAX and other extensions which use the '@' character. + ; The default is 'no' just for backward compatibility, but the + ; suggestion is to change it. + ; overridecontext = no ; if 'no', the last @ will start the context + ; if 'yes' the whole string is an extension. + + ; low level device parameters in case you have problems with the + ; device driver on your operating system. You should not touch these + ; unless you know what you are doing. + ; queuesize = 10 ; frames in device driver + ; frags = 8 ; argument to SETFRAGMENT + + ;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- + ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an + ; OSS channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The OSS channel can't accept jitter, + ; thus an enabled jitterbuffer on the receive OSS side will always + ; be used if the sending side can create jitter. + + ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + + ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + + ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of an OSS + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmax-size) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + + ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". + ;----------------------------------------------------------------------------------- + +; Below are the settings to support video. You can include them +; in your general configuration as [general](+,video) +; The parameters are all available through the CLI as "console name value" +; Section names used here are only examples. + +[my_video](!) ; you can just include in your config + videodevice = /dev/video0 ; uses your V4L webcam as video source + videodevice = X11 ; X11 grabber. Dragging on the local display moves the origin. + videocodec = h263 ; also h261, h263p, h264, mpeg4, ... + + ; video_size is the geometry used by the encoder. + ; Depending on the codec your choice is restricted. + video_size = 352x288 ; the format WIDTHxHEIGHT is also ok + video_size = cif ; sqcif, qcif, cif, qvga, vga, ... + + ; You can also set the geometry used for the camera, local display and remote display. + ; The local window is on the right, the remote window is on the left. + ; Right clicking with the mouse on a video window increases the size, + ; center-clicking reduces the size. + camera_size = cif + remote_size = cif + local_size = qcif + + bitrate = 60000 ; rate told to ffmpeg. + fps = 5 ; frames per second from the source. + ; qmin = 3 ; quantizer value passed to the encoder. + +; The keypad is made of an image (in any format supported by SDL_image) +; and some configuration entries indicating the location and function of buttons. +; These entries can also be contained in the comment field of the image, +; which is a lot more convenient to manage. +; E.g. for jpeg you can write them with wrjpgcom (part of libjpeg). +; The format to define keys is +; region = <event> <shape> x0 y0 x1 y1 h +; where <event> is the event to be generated (a digit, pickup, hangup,...) +; <shape> is the shape of the region (currently 'rect' and 'circle' are +; supported, the latter is really an ellipse), x0 y0 x1 y1 are the +; coordinates of the base of the rectangle or main diameter of the ellipse, +; (they can be rotated) while h is the height of the rectangle or the other +; diameter of the ellipse. +; +[my_skin](!) + keypad = /tmp/keypad.jpg + region = 1 rect 19 18 67 18 28 + region = 2 rect 84 18 133 18 28 + region = 3 rect 152 18 201 18 28 + region = 4 rect 19 60 67 60 28 + region = 5 rect 84 60 133 60 28 + region = 6 rect 152 60 201 60 28 + region = 7 rect 19 103 67 103 28 + region = 8 rect 84 103 133 103 28 + region = 9 rect 152 103 201 103 28 + region = * rect 19 146 67 146 28 + region = 0 rect 84 146 133 146 28 + region = # rect 152 146 201 146 28 + region = pickup rect 229 15 267 15 40 + region = hangup rect 230 66 270 64 40 + region = mute circle 232 141 264 141 33 + region = sendvideo circle 235 185 266 185 33 + region = autoanswer rect 228 212 275 212 50 + +; uncomment this line to add video support +; [default](+,my_video,my_skin) + +[card1] + ; device = /dev/dsp1 ; alternate device + |