diff options
Diffstat (limited to 'trunk/configs/mgcp.conf.sample')
| -rw-r--r-- | trunk/configs/mgcp.conf.sample | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/trunk/configs/mgcp.conf.sample b/trunk/configs/mgcp.conf.sample new file mode 100644 index 000000000..104891e8a --- /dev/null +++ b/trunk/configs/mgcp.conf.sample @@ -0,0 +1,110 @@ +; +; MGCP Configuration for Asterisk +; +[general] +;port = 2427 +;bindaddr = 0.0.0.0 + +; See qos.tex or Quality of Service section of asterisk.pdf for a description of these parameters. +;tos=cs3 ; Sets TOS for signaling packets. +;tos_audio=ef ; Sets TOS for RTP audio packets. +;cos=3 ; Sets 802.1p priority for signaling packets. +;cos_audio=5 ; Sets 802.1p priority for RTP audio packets. + +;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- +; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a + ; MGCP channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The MGCP channel can accept jitter, + ; thus an enabled jitterbuffer on the receive MGCP side will only + ; be used if the sending side can create jitter and jbforce is + ; also set to yes. + +; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP + ; channel. Defaults to "no". + +; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + +; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + +; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmax-size) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + +; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". +;----------------------------------------------------------------------------------- + +;[dlinkgw] +;host = 192.168.0.64 +;context = default +;canreinvite = no +;line => aaln/2 +;line => aaln/1 + +;; The MGCP channel supports the following service codes: +;; # - Transfer +;; *67 - Calling Number Delivery Blocking +;; *70 - Cancel Call Waiting +;; *72 - Call Forwarding Activation +;; *73 - Call Forwarding Deactivation +;; *78 - Do Not Disturb Activation +;; *79 - Do Not Disturb Deactivation +;; *8 - Call pick-up +; +; known to work with Swissvoice IP10s +;[192.168.1.20] +;context=local +;host=192.168.1.20 +;callerid = "John Doe" <123> +;callgroup=0 ; in the range from 0 to 63 +;pickupgroup=0 ; in the range from 0 to 63 +;nat=no +;threewaycalling=yes +;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer +;callwaiting=yes ; this might be a cause of trouble for ip10s +;cancallforward=yes +;line => aaln/1 +; + +;[dph100] +; +; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in +; chan_mgcp.c in addition to enabling the slowsequence mode due to +; bugs in the D-Link firmware +; +;context=local +;host=dynamic +;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or + ; 'hybrid' which starts in none and moves to inband. Default is none. +;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing +;line => aaln/1 + +; known to work with wave7optics FTTH LMGs +;[192.168.1.20] +;accountcode = 1000 ; record this in cdr as account identification for billing +;amaflags = billing ; record this in cdr as flagged for 'billing', + ; 'documentation', or 'omit' +;context = local +;host = 192.168.1.20 +;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*' + ; another common format is '*' +;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration... +;callwaiting = no +;callreturn = yes +;cancallforward = yes +;canreinvite = no +;transfer = no +;dtmfmode = inband +;line => aaln/1 ; now lets save this config to line1 aka aaln/1 +;callerid = "Duane Cox" <456> ; now lets setup line 2 +;callwaiting = no +;callreturn = yes +;cancallforward = yes +;canreinvite = no +;transfer = no +;dtmfmode = inband +;line => aaln/2 ; now lets save this config to line2 aka aaln/2 |