diff options
Diffstat (limited to 'trunk/configs/manager.conf.sample')
| -rw-r--r-- | trunk/configs/manager.conf.sample | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/trunk/configs/manager.conf.sample b/trunk/configs/manager.conf.sample new file mode 100644 index 000000000..80bea5a70 --- /dev/null +++ b/trunk/configs/manager.conf.sample @@ -0,0 +1,97 @@ +; +; AMI - The Asterisk Manager Interface +; +; Third party application call management support and PBX event supervision +; +; This configuration file is read every time someone logs in +; +; Use the "manager show commands" at the CLI to list available manager commands +; and their authorization levels. +; +; "manager show command <command>" will show a help text. +; +; ---------------------------- SECURITY NOTE ------------------------------- +; Note that you should not enable the AMI on a public IP address. If needed, +; block this TCP port with iptables (or another FW software) and reach it +; with IPsec, SSH, or SSL vpn tunnel. You can also make the manager +; interface available over http/https if Asterisk's http server is enabled in +; http.conf and if both "enabled" and "webenabled" are set to yes in +; this file. Both default to no. httptimeout provides the maximum +; timeout in seconds before a web based session is discarded. The +; default is 60 seconds. +; +[general] +enabled = no +;webenabled = yes +port = 5038 + +;httptimeout = 60 +; a) httptimeout sets the Max-Age of the http cookie +; b) httptimeout is the amount of time the webserver waits +; on a action=waitevent request (actually its httptimeout-10) +; c) httptimeout is also the amount of time the webserver keeps +; a http session alive after completing a successful action + +bindaddr = 0.0.0.0 + +; Parameters that control AMI over TLS. ("enabled" must be set too). +; You can open a connection to this socket with e.g. +; +; openssl s_client -connect my_host:5039 +; +; sslenable=no ; set to YES to enable it +; sslbindport=5039 ; the port to bind to +; sslbindaddr=0.0.0.0 ; address to bind to, default to bindaddr +; sslcert=/tmp/asterisk.pem ; path to the certificate. + + +; +;allowmultiplelogin = yes ; IF set to no, rejects manager logins that are already in use. +; ; The default is yes. +; +;displayconnects = yes +; +; Add a Unix epoch timestamp to events (not action responses) +; +;timestampevents = yes + +; debug = on ; enable some debugging info in AMI messages (default off). + ; Also accessible through the "manager debug" CLI command. +;[mark] +;secret = mysecret +;deny=0.0.0.0/0.0.0.0 +;permit=209.16.236.73/255.255.255.0 +; +; If the device connected via this user accepts input slowly, +; the timeout for writes to it can be increased to keep it +; from being disconnected (value is in milliseconds) +; +; writetimeout = 100 +; +;displayconnects = yes ; Display on CLI user login/logoff +; +; Authorization for various classes +; +; Read authorization permits you to receive asynchronous events, in general. +; Write authorization permits you to send commands and get back responses. The +; following classes exist: +; +; system - General information about the system and ability to run system +; management commands, such as Shutdown, Restart, and Reload. +; call - Information about channels and ability to set information in a +; running channel. +; log - Logging information. Read-only. +; verbose - Verbose information. Read-only. +; agent - Information about queues and agents and ability to add queue +; members to a queue. +; user - Permission to send and receive UserEvent. +; config - Ability to read and write configuration files. +; command - Permission to run CLI commands. Write-only. +; dtmf - Receive DTMF events. Read-only. +; reporting - Ability to get information about the system. +; cdr - Output of cdr_manager, if loaded. Read-only. +; dialplan - Receive NewExten and VarSet events. Read-only. +; +;read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan +;write = system,call,agent,user,config,command,reporting + |