diff options
Diffstat (limited to 'doc/ss7.txt')
-rw-r--r-- | doc/ss7.txt | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/ss7.txt b/doc/ss7.txt index 94d01a0b0..0e4bb0bc5 100644 --- a/doc/ss7.txt +++ b/doc/ss7.txt @@ -79,25 +79,25 @@ defaultdpc = 3 ; The point code of the switch you want to send your ISUP ; Now we configure our Bearer channels (CICs) -cicbeginswith = 1 ; Number to start counting the CICs from. So if Zap/1 to - ; Zap/15 are CICs 1-15, you would set this to 1 before you +cicbeginswith = 1 ; Number to start counting the CICs from. So if DAHDI/1 to + ; DAHDI/15 are CICs 1-15, you would set this to 1 before you ; declare channel=1-15 -channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 +channel=1-15 ; Use DAHDI/1-15 and assign them to CICs 1-15 -cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 so we initialize +cicbeginswith = 17 ; Now for DAHDI/17 to DAHDI/31, they are CICs 17-31 so we initialize ; cicbeginswith to 17 before we declare those channels channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 -sigchan = 16 ; This is where you declare which Zap channel is your signalling - ; channel. In our case it is Zap/16. You can add redundant +sigchan = 16 ; This is where you declare which DAHDI channel is your signalling + ; channel. In our case it is DAHDI/16. You can add redundant ; signalling channels by adding additional sigchan= lines. ; If we want an alternate redundant signalling channel add this sigchan = 48 ; This would put two signalling channels in our linkset, one at - ; Zap/16 and one at Zap/48 which both would be used to send/receive + ; DAHDI/16 and one at DAHDI/48 which both would be used to send/receive ; ISUP traffic. ; End of chan_dahdi.conf |