diff options
Diffstat (limited to 'doc/hardware.tex')
| -rw-r--r-- | doc/hardware.tex | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/doc/hardware.tex b/doc/hardware.tex deleted file mode 100644 index 3d7cabd82..000000000 --- a/doc/hardware.tex +++ /dev/null @@ -1,100 +0,0 @@ -\subsection{Introduction} - -A PBX is only really useful if you can get calls into it. Of course, you -can use Asterisk with VoIP calls (SIP, H.323, IAX), but you can also talk -to the real PSTN through various cards. - -Supported Hardware is divided into two general groups: Zaptel devices and -non-zaptel devices. The Zaptel compatible hardware supports pseudo-TDM -conferencing and all call features through chan\_zap, whereas non-zaptel -compatible hardware may have different features. - -\subsection{Zaptel compatible hardware} - -\begin{itemize} -\item Digium, Inc. (Primary Developer of Asterisk) - http://www.digium.com - \begin{itemize} - \item Analog Interfaces - \begin{itemize} - \item TDM400P - The TDM400P is a half-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. - \item TDM800P - The TDM800P is a half-length PCI 2.2-compliant, 8 port card using Digium's VoiceBus technology that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. - \item TDM2400P - The TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. - \end{itemize} - \item Digital Interfaces - \begin{itemize} - \item TE412P - The TE412P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE410P - The TE410P improves performance and scalability through bus mastering architecture. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE407P - The TE407P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE405P - The TE405P improves performance and scalability through bus mastering architecture. It supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. - \item TE212P - The TE212P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE210P - The TE210P improves performance and scalability through bus mastering architecture. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE207P - The TE207P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. - \item TE205P - The TE205P improves performance and scalability through bus mastering architecture. It supports both E1 and T1/J1 environments and is selectable on a per-card or per-port basis. - \item TE120P - The TE120P is a single span, selectable T1, E1, or J1 card and utilizes Digium's VoiceBus™ technology. It supports both voice and data modes. - \item TE110P - The TE110P brings a high-performance, cost-effective, and flexible single span togglable T1, E1, J1 interface to the Digium line-up of telephony interface devices. - \end{itemize} - \end{itemize} -\end{itemize} - -\subsection{Non-zaptel compatible hardware} - -\begin{itemize} - \item QuickNet, Inc. - http://www.quicknet.net - \begin{itemize} - \item Internet PhoneJack - Single FXS interface. Supports Linux telephony - interface. DSP compression built-in. - - \item Internet LineJack - Single FXS or FXO interface. Supports Linux - telephony interface. - \end{itemize} -\end{itemize} - -\subsection{mISDN compatible hardware} - -mISDN homepage: http://www.isdn4linux.de/mISDN/ - -Any adapter with an mISDN driver should be compatible with -chan\_misdn. See the mISDN section for more information. - -\begin{itemize} - \item Digium, Inc. (Primary Developer of Asterisk) - http://www.digium.com - \begin{itemize} - \item B410P - 4 Port BRI card (TE/NT) - \end{itemize} -\end{itemize} - -\begin{itemize} - \item beroNet - http://www.beronet.com - \begin{itemize} - \item BN4S0 - 4 Port BRI card (TE/NT) - - \item BN8S0 - 8 Port BRI card (TE/NT) - - \item Billion Card - Single Port BRI card (TE (/NT with crossed cable) ) - \end{itemize} -\end{itemize} - -\subsection{Miscellaneous other interfaces} - -\begin{itemize} - \item Digium, Inc. (Primary Developer of Asterisk) - \begin{itemize} - \item TC400B - The TC400B is a half-length, low-profile PCI 2.2-compliant card for transforming complex VoIP codecs (G.729) into simple codecs. - \end{itemize} - - \item ALSA - http://www.alsa-project.org - \begin{itemize} - \item Any ALSA compatible full-duplex sound card - \end{itemize} - - \item OSS - http://www.opensound.com - \begin{itemize} - \item Any OSS compatible full-duplex sound card - \end{itemize} -\end{itemize} |