diff options
Diffstat (limited to 'configs/vpb.conf.sample')
-rw-r--r-- | configs/vpb.conf.sample | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/configs/vpb.conf.sample b/configs/vpb.conf.sample deleted file mode 100644 index 4a9b0b36a..000000000 --- a/configs/vpb.conf.sample +++ /dev/null @@ -1,108 +0,0 @@ -; -; V6PCI/V12PCI config file for VoiceTronix Hardware -; -; Options for [general] section -; -; type = v12pci|v6pci|v4pci -; cards = number of cards -; To use Asterisk indication tones -; indication = 1 -; none,-24db,-18db only for use with OpenLine4 -; ecsuppthres = 0|2048|4096 -; Inter Digit Delay timeout for when collecting DTMF tones for dialling -; from a Station port, in ms -; dtmfidd = 3000 -; To use Asterisk DTMF detection -; ast-dtmf-det=1 -; Used with ast-dtmf-det -; relaxdtmf=1 -; When a native bridge occurs between 2 vpb channels, it will only break -; the connection for '#' and '*' -; break-for-dtmf=no -; Set the maximum period between received rings, default 4000ms -; timer_period_ring=4000 -; -; Options for [interface] section -; board = board_number (1, 2, 3, ...) -; channel = channel_number (1,2,3...) -; mode = fxo|immediate|dialtone -- for type of line and line handling -; context = starting context -; echocancel = on|off (on by default of v4pci, off by default for others) -; callerid = on|off|v23|bell (on => to collect caller ID if available between 1st/2nd rings using vpb functions) -; (v23|bell => collect caller ID using asterisk functions) -; Or for use with FXS channels a '"name" <location>' format can be used to set the channels CID -; -; UseLoopDrop = 0|1 (enables the use of Loop Drop detection, on by default in -; some cases spurious loop-drops can cause unexpected -; hangup detection) -; -; Gain settings -; txgain => Transmit Software Gain (-12 => 12) -; rxgain => Receive Software Gain (-12 => 12) -; txhwgain => Transmit hardware gain (-12 => 12) -; rxhwgain => Receive Hardware gain (-12 => 12) -; -; These are advanced settings and only mentioned for completeness. -; bal1 => Hybrid balance codec register 1 -; bal2 => Hybrid balance codec register 2 -; bal3 => Hybrid balance codec register 3 -; -; Dial translations - if you want a pause or hook-flash in your dial string -; you can use "w" for pause (wait) or "f" for "hook-flash", eg: -; exten => _9XXX,1,Dial(vpb/g1/ww${EXTEN:${TRUNKMSD}}) -; -; - -[general] -type = v12pci -;type = v6pci -;type = v4pci -cards = 1 - -[interfaces] - -board = 0 -echocancel = on - - -; For OpenLine4 cards -;context = demo -;mode = fxo -;channel = 0 -;channel = 1 -;channel = 2 -;channel = 3 - -; For OpenSwith12 with jumpers at factory default -context = demo -mode = fxo -channel = 8 -channel = 9 -channel = 10 -channel = 11 - -context = local -mode = dialtone -channel = 0 -channel = 1 -channel = 2 -channel = 3 -channel = 4 -channel = 5 -channel = 6 -channel = 7 -; -; For OpenSwitch6 -; Note that V6PCI channel numbers start at 7! -;context = demo -;mode = fxo -;channel = 6 -;channel = 7 - -;mode = dialtone -;channel = 8 -;channel = 9 -;channel = 10 -;channel = 11 - - |