diff options
Diffstat (limited to 'configs/features.conf.sample')
-rw-r--r-- | configs/features.conf.sample | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/configs/features.conf.sample b/configs/features.conf.sample new file mode 100644 index 000000000..1d574c990 --- /dev/null +++ b/configs/features.conf.sample @@ -0,0 +1,100 @@ +; +; Sample Call Features (parking, transfer, etc) configuration +; + +[general] +parkext => 700 ; What extension to dial to park +parkpos => 701-720 ; What extensions to park calls on. These needs to be + ; numeric, as Asterisk starts from the start position + ; and increments with one for the next parked call. +context => parkedcalls ; Which context parked calls are in +;parkingtime => 45 ; Number of seconds a call can be parked for + ; (default is 45 seconds) +;courtesytone = beep ; Sound file to play to the parked caller + ; when someone dials a parked call + ; or the Touch Monitor is activated/deactivated. +;parkedplay = caller ; Who to play the courtesy tone to when picking up a parked call + ; one of: parked, caller, both (default is caller) +;parkedcalltransfers = caller ; Enables or disables DTMF based transfers when picking up a parked call. + ; one of: callee, caller, both, no (default is both) +;adsipark = yes ; if you want ADSI parking announcements +;findslot => next ; Continue to the 'next' free parking space. + ; Defaults to 'first' available +;parkedmusicclass=default ; This is the MOH class to use for the parked channel + ; as long as the class is not set on the channel directly + ; using Set(CHANNEL(musicclass)=whatever) in the dialplan + +;transferdigittimeout => 3 ; Number of seconds to wait between digits when transferring a call + ; (default is 3 seconds) +;xfersound = beep ; to indicate an attended transfer is complete +;xferfailsound = beeperr ; to indicate a failed transfer +;pickupexten = *8 ; Configure the pickup extension. (default is *8) +;featuredigittimeout = 500 ; Max time (ms) between digits for + ; feature activation (default is 500 ms) +;atxfernoanswertimeout = 15 ; Timeout for answer on attended transfer default is 15 seconds. + +; Note that the DTMF features listed below only work when two channels have answered and are bridged together. +; They can not be used while the remote party is ringing or in progress. If you require this feature you can use +; chan_local in combination with Answer to accomplish it. + +[featuremap] +;blindxfer => #1 ; Blind transfer (default is #) -- Make sure to set the T and/or t option in the Dial() or Queue() app call! +;disconnect => *0 ; Disconnect (default is *) -- Make sure to set the H and/or h option in the Dial() or Queue() app call! +;automon => *1 ; One Touch Record a.k.a. Touch Monitor -- Make sure to set the W and/or w option in the Dial() or Queue() app call! +;atxfer => *2 ; Attended transfer -- Make sure to set the T and/or t option in the Dial() or Queue() app call! +;parkcall => #72 ; Park call (one step parking) -- Make sure to set the K and/or K option in the Dial() app call! + +[applicationmap] +; Note that the DYNAMIC_FEATURES channel variable must be set to use the features +; defined here. The value of DYNAMIC_FEATURES should be the names of the features +; to allow the channel to use separated by '#'. For example: +; +; Set(__DYNAMIC_FEATURES=myfeature1#myfeature2#myfeature3) +; +; (Note: The two leading underscores allow these feature settings to be set on +; on the outbound channels, as well. Otherwise, only the original channel +; will have access to these features.) +; +; The syntax for declaring a dynamic feature is the following: +; +;<FeatureName> => <DTMF_sequence>,<ActivateOn>[/<ActivatedBy>],<Application>[,<AppArguments>[,MOH_Class]] +; +; FeatureName -> This is the name of the feature used in when setting the +; DYNAMIC_FEATURES variable to enable usage of this feature. +; DTMF_sequence -> This is the key sequence used to activate this feature. +; ActivateOn -> This is the channel of the call that the application will be executed +; on. Valid values are "self" and "peer". "self" means run the +; application on the same channel that activated the feature. "peer" +; means run the application on the opposite channel from the one that +; has activated the feature. +; ActivatedBy -> This is which channel is allowed to activate this feature. Valid +; values are "caller", "callee", and "both". "both" is the default. +; The "caller" is the channel that executed the Dial application, while +; the "callee" is the channel called by the Dial application. +; Application -> This is the application to execute. +; AppArguments -> These are the arguments to be passed into the application. +; MOH_Class -> This is the music on hold class to play while the idle +; channel waits for the feature to complete. If left blank, +; no music will be played. +; +; +; IMPORTANT NOTE: The applicationmap is not intended to be used for all Asterisk +; applications. When applications are used in extensions.conf, they are executed +; by the PBX core. In this case, these applications are executed outside of the +; PBX core, so it does *not* make sense to use any application which has any +; concept of dialplan flow. Examples of this would be things like Macro, Goto, +; Background, WaitExten, and many more. +; +; Enabling these features means that the PBX needs to stay in the media flow and +; media will not be re-directed if DTMF is sent in the media stream. +; +; Example Usage: +; +;testfeature => #9,peer,Playback,tt-monkeys ;Allow both the caller and callee to play +; ;tt-monkeys to the opposite channel +; +;pauseMonitor => #1,self/callee,Pausemonitor ;Allow the callee to pause monitoring +; ;on their channel +;unpauseMonitor => #3,self/callee,UnPauseMonitor ;Allow the callee to unpause monitoring +; ;on their channel +; |