diff options
Diffstat (limited to 'codecs/lpc10/encode.c')
-rwxr-xr-x | codecs/lpc10/encode.c | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/codecs/lpc10/encode.c b/codecs/lpc10/encode.c new file mode 100755 index 000000000..0cfabdf79 --- /dev/null +++ b/codecs/lpc10/encode.c @@ -0,0 +1,349 @@ +/* + +$Log$ +Revision 1.1 2000/01/05 08:20:39 markster +Version 0.1.2 from FTP + +Revision 1.2 2000/01/05 08:20:39 markster +Some OSS fixes and a few lpc changes to make it actually work + + * Revision 1.1 1996/08/19 22:32:21 jaf + * Initial revision + * + +*/ + +#ifdef P_R_O_T_O_T_Y_P_E_S +extern int encode_(integer *voice, integer *pitch, real *rms, real *rc, integer *ipitch, integer *irms, integer *irc); +/* comlen contrl_ 12 */ +#endif + +/* -- translated by f2c (version 19951025). + You must link the resulting object file with the libraries: + -lf2c -lm (in that order) +*/ + +#include "f2c.h" + +/* Common Block Declarations */ + +extern struct { + integer order, lframe; + logical corrp; +} contrl_; + +#define contrl_1 contrl_ + +/* Table of constant values */ + +static integer c__2 = 2; + +/* ***************************************************************** */ + +/* ENCODE Version 54 */ + +/* $Log$ + * Revision 1.1 2000/01/05 08:20:39 markster + * Version 0.1.2 from FTP + * +/* Revision 1.2 2000/01/05 08:20:39 markster +/* Some OSS fixes and a few lpc changes to make it actually work +/* + * Revision 1.1 1996/08/19 22:32:21 jaf + * Initial revision + * */ +/* Revision 1.5 1996/03/26 19:35:50 jaf */ +/* Commented out trace statements. */ + +/* Revision 1.4 1996/03/21 00:26:29 jaf */ +/* Added the comment that this subroutine has no local state. */ + +/* In the last check-in, I forgot to mention that I had added comments */ +/* explaining which indices of array arguments are read or written. */ + +/* Revision 1.3 1996/03/21 00:22:39 jaf */ +/* Added comments explaining that all local arrays are effectively */ +/* constants. */ + +/* Revision 1.2 1996/03/13 18:48:33 jaf */ +/* Comments added explaining that none of the local variables of this */ +/* subroutine need to be saved from one invocation to the next. */ + +/* Revision 1.1 1996/02/07 14:45:29 jaf */ +/* Initial revision */ + + +/* ***************************************************************** */ + +/* Quantize LPC parameters for transmission */ + +/* INPUTS: */ +/* VOICE - Half frame voicing decisions */ +/* Indices 1 through 2 read. */ +/* PITCH - Pitch */ +/* RMS - Energy */ +/* RC - Reflection coefficients */ +/* Indices 1 through ORDER read. */ +/* CORRP - Error Correction: TRUE = yes, FALSE = none */ +/* (this is defined in file control.fh) */ +/* OUTPUTS: */ +/* IPITCH - Coded pitch and voicing */ +/* IRMS - Quantized energy */ +/* IRC - Quantized reflection coefficients */ +/* Indices 1 through MAX(ORDER,2) written. */ +/* If CORRP is .TRUE., then indices 1 through 10 written */ +/* for unvoiced frames. */ + +/* This subroutine has no local state. */ + +/* Subroutine */ int encode_(integer *voice, integer *pitch, real *rms, real * + rc, integer *ipitch, integer *irms, integer *irc) +{ + /* Initialized data */ + + static integer enctab[16] = { 0,7,11,12,13,10,6,1,14,9,5,2,3,4,8,15 }; + static integer entau[60] = { 19,11,27,25,29,21,23,22,30,14,15,7,39,38,46, + 42,43,41,45,37,53,49,51,50,54,52,60,56,58,26,90,88,92,84,86,82,83, + 81,85,69,77,73,75,74,78,70,71,67,99,97,113,112,114,98,106,104,108, + 100,101,76 }; + static integer enadd[8] = { 1920,-768,2432,1280,3584,1536,2816,-1152 }; + static real enscl[8] = { .0204f,.0167f,.0145f,.0147f,.0143f,.0135f,.0125f, + .0112f }; + static integer enbits[8] = { 6,5,4,4,4,4,3,3 }; + static integer entab6[64] = { 0,0,0,0,0,0,1,1,1,1,1,1,1,2,2,2,2,2,2,2,3,3, + 3,3,3,3,3,4,4,4,4,4,4,4,5,5,5,5,5,6,6,6,6,6,7,7,7,7,7,8,8,8,8,9,9, + 9,10,10,11,11,12,13,14,15 }; + static integer rmst[64] = { 1024,936,856,784,718,656,600,550,502,460,420, + 384,352,328,294,270,246,226,206,188,172,158,144,132,120,110,102, + 92,84,78,70,64,60,54,50,46,42,38,34,32,30,26,24,22,20,18,17,16,15, + 14,13,12,11,10,9,8,7,6,5,4,3,2,1,0 }; + + /* System generated locals */ + integer i__1, i__2; + + /* Builtin functions */ + integer pow_ii(integer *, integer *); + + /* Local variables */ + integer idel, nbit, i__, j, i2, i3, mrk; + +/* $Log$ + * Revision 1.1 2000/01/05 08:20:39 markster + * Version 0.1.2 from FTP + * +/* Revision 1.2 2000/01/05 08:20:39 markster +/* Some OSS fixes and a few lpc changes to make it actually work +/* + * Revision 1.1 1996/08/19 22:32:21 jaf + * Initial revision + * */ +/* Revision 1.3 1996/03/29 22:03:47 jaf */ +/* Removed definitions for any constants that were no longer used. */ + +/* Revision 1.2 1996/03/26 19:34:33 jaf */ +/* Added comments indicating which constants are not needed in an */ +/* application that uses the LPC-10 coder. */ + +/* Revision 1.1 1996/02/07 14:43:51 jaf */ +/* Initial revision */ + +/* LPC Configuration parameters: */ +/* Frame size, Prediction order, Pitch period */ +/* Arguments */ +/* $Log$ + * Revision 1.1 2000/01/05 08:20:39 markster + * Version 0.1.2 from FTP + * +/* Revision 1.2 2000/01/05 08:20:39 markster +/* Some OSS fixes and a few lpc changes to make it actually work +/* + * Revision 1.1 1996/08/19 22:32:21 jaf + * Initial revision + * */ +/* Revision 1.3 1996/03/29 22:05:55 jaf */ +/* Commented out the common block variables that are not needed by the */ +/* embedded version. */ + +/* Revision 1.2 1996/03/26 19:34:50 jaf */ +/* Added comments indicating which constants are not needed in an */ +/* application that uses the LPC-10 coder. */ + +/* Revision 1.1 1996/02/07 14:44:09 jaf */ +/* Initial revision */ + +/* LPC Processing control variables: */ + +/* *** Read-only: initialized in setup */ + +/* Files for Speech, Parameter, and Bitstream Input & Output, */ +/* and message and debug outputs. */ + +/* Here are the only files which use these variables: */ + +/* lpcsim.f setup.f trans.f error.f vqsetup.f */ + +/* Many files which use fdebug are not listed, since it is only used in */ +/* those other files conditionally, to print trace statements. */ +/* integer fsi, fso, fpi, fpo, fbi, fbo, pbin, fmsg, fdebug */ +/* LPC order, Frame size, Quantization rate, Bits per frame, */ +/* Error correction */ +/* Subroutine SETUP is the only place where order is assigned a value, */ +/* and that value is 10. It could increase efficiency 1% or so to */ +/* declare order as a constant (i.e., a Fortran PARAMETER) instead of as +*/ +/* a variable in a COMMON block, since it is used in many places in the */ +/* core of the coding and decoding routines. Actually, I take that back. +*/ +/* At least when compiling with f2c, the upper bound of DO loops is */ +/* stored in a local variable before the DO loop begins, and then that is +*/ +/* compared against on each iteration. */ +/* Similarly for lframe, which is given a value of MAXFRM in SETUP. */ +/* Similarly for quant, which is given a value of 2400 in SETUP. quant */ +/* is used in only a few places, and never in the core coding and */ +/* decoding routines, so it could be eliminated entirely. */ +/* nbits is similar to quant, and is given a value of 54 in SETUP. */ +/* corrp is given a value of .TRUE. in SETUP, and is only used in the */ +/* subroutines ENCODE and DECODE. It doesn't affect the speed of the */ +/* coder significantly whether it is .TRUE. or .FALSE., or whether it is +*/ +/* a constant or a variable, since it is only examined once per frame. */ +/* Leaving it as a variable that is set to .TRUE. seems like a good */ +/* idea, since it does enable some error-correction capability for */ +/* unvoiced frames, with no change in the coding rate, and no noticeable +*/ +/* quality difference in the decoded speech. */ +/* integer quant, nbits */ +/* *** Read/write: variables for debugging, not needed for LPC algorithm +*/ + +/* Current frame, Unstable frames, Output clip count, Max onset buffer, +*/ +/* Debug listing detail level, Line count on listing page */ + +/* nframe is not needed for an embedded LPC10 at all. */ +/* nunsfm is initialized to 0 in SETUP, and incremented in subroutine */ +/* ERROR, which is only called from RCCHK. When LPC10 is embedded into */ +/* an application, I would recommend removing the call to ERROR in RCCHK, +*/ +/* and remove ERROR and nunsfm completely. */ +/* iclip is initialized to 0 in SETUP, and incremented in entry SWRITE in +*/ +/* sread.f. When LPC10 is embedded into an application, one might want */ +/* to cause it to be incremented in a routine that takes the output of */ +/* SYNTHS and sends it to an audio device. It could be optionally */ +/* displayed, for those that might want to know what it is. */ +/* maxosp is never initialized to 0 in SETUP, although it probably should +*/ +/* be, and it is updated in subroutine ANALYS. I doubt that its value */ +/* would be of much interest to an application in which LPC10 is */ +/* embedded. */ +/* listl and lincnt are not needed for an embedded LPC10 at all. */ +/* integer nframe, nunsfm, iclip, maxosp, listl, lincnt */ +/* common /contrl/ fsi, fso, fpi, fpo, fbi, fbo, pbin, fmsg, fdebug */ +/* common /contrl/ quant, nbits */ +/* common /contrl/ nframe, nunsfm, iclip, maxosp, listl, lincnt */ +/* Parameters/constants */ +/* These arrays are not Fortran PARAMETER's, but they are defined */ +/* by DATA statements below, and their contents are never altered. +*/ +/* Local variables that need not be saved */ + /* Parameter adjustments */ + --irc; + --rc; + --voice; + + /* Function Body */ +/* Scale RMS and RC's to integers */ + *irms = *rms; + i__1 = contrl_1.order; + for (i__ = 1; i__ <= i__1; ++i__) { + irc[i__] = rc[i__] * 32768.f; + } +/* IF(LISTL.GE.3)WRITE(FDEBUG,800)VOICE,PITCH,IRMS,(IRC(I),I=1,ORDER) */ +/* 800 FORMAT(1X,/,' <<ENCODE IN>>',T32,2I3,I6,I5,T50,10I8) */ +/* Encode pitch and voicing */ + if (voice[1] != 0 && voice[2] != 0) { + *ipitch = entau[*pitch - 1]; + } else { + if (contrl_1.corrp) { + *ipitch = 0; + if (voice[1] != voice[2]) { + *ipitch = 127; + } + } else { + *ipitch = (voice[1] << 1) + voice[2]; + } + } +/* Encode RMS by binary table search */ + j = 32; + idel = 16; + *irms = min(*irms,1023); + while(idel > 0) { + if (*irms > rmst[j - 1]) { + j -= idel; + } + if (*irms < rmst[j - 1]) { + j += idel; + } + idel /= 2; + } + if (*irms > rmst[j - 1]) { + --j; + } + *irms = 31 - j / 2; +/* Encode RC(1) and (2) as log-area-ratios */ + for (i__ = 1; i__ <= 2; ++i__) { + i2 = irc[i__]; + mrk = 0; + if (i2 < 0) { + i2 = -i2; + mrk = 1; + } + i2 /= 512; + i2 = min(i2,63); + i2 = entab6[i2]; + if (mrk != 0) { + i2 = -i2; + } + irc[i__] = i2; + } +/* Encode RC(3) - (10) linearly, remove bias then scale */ + i__1 = contrl_1.order; + for (i__ = 3; i__ <= i__1; ++i__) { + i2 = irc[i__] / 2; + i2 = (i2 + enadd[contrl_1.order + 1 - i__ - 1]) * enscl[ + contrl_1.order + 1 - i__ - 1]; +/* Computing MIN */ + i__2 = max(i2,-127); + i2 = min(i__2,127); + nbit = enbits[contrl_1.order + 1 - i__ - 1]; + i3 = 0; + if (i2 < 0) { + i3 = -1; + } + i2 /= pow_ii(&c__2, &nbit); + if (i3 == -1) { + --i2; + } + irc[i__] = i2; + } +/* Protect the most significant bits of the most */ +/* important parameters during non-voiced frames. */ +/* RC(1) - RC(4) are protected using 20 parity bits */ +/* replacing RC(5) - RC(10). */ + if (contrl_1.corrp) { + if (*ipitch == 0 || *ipitch == 127) { + irc[5] = enctab[(irc[1] & 30) / 2]; + irc[6] = enctab[(irc[2] & 30) / 2]; + irc[7] = enctab[(irc[3] & 30) / 2]; + irc[8] = enctab[(*irms & 30) / 2]; + irc[9] = enctab[(irc[4] & 30) / 2] / 2; + irc[10] = enctab[(irc[4] & 30) / 2] & 1; + } + } +/* IF(LISTL.GE.3)WRITE(FDEBUG,801)VOICE,IPITCH,IRMS,(IRC(J),J=1,ORDER) */ +/* 801 FORMAT(1X,'<<ENCODE OUT>>',T32,2I3,I6,I5,T50,10I8) */ + return 0; +} /* encode_ */ + |