diff options
| -rw-r--r-- | Makefile | 84 | ||||
| -rw-r--r-- | configs/asterisk.conf.sample | 83 |
2 files changed, 100 insertions, 67 deletions
@@ -60,6 +60,7 @@ export ASTBINDIR export ASTSBINDIR export AGI_DIR export ASTCONFPATH +export ASTKEYDIR export OSARCH # Operating system export PROC # Processor type @@ -701,73 +702,22 @@ samples: adsi echo "Installing file $$x"; \ $(INSTALL) -m 644 $$x $${dst} ;\ done - @if [ "$(OVERWRITE)" = "y" ] || [ ! -f $(DESTDIR)$(ASTCONFPATH) ]; then \ - echo "Creating asterisk.conf"; \ - ( \ - echo "[directories](!) ; remove the (!) to enable this" ; \ - echo "astetcdir => $(ASTETCDIR)" ; \ - echo "astmoddir => $(MODULES_DIR)" ; \ - echo "astvarlibdir => $(ASTVARLIBDIR)" ; \ - echo "astdbdir => $(ASTDBDIR)" ; \ - echo "astkeydir => $(ASTKEYDIR)" ; \ - echo "astdatadir => $(ASTDATADIR)" ; \ - echo "astagidir => $(AGI_DIR)" ; \ - echo "astspooldir => $(ASTSPOOLDIR)" ; \ - echo "astrundir => $(ASTVARRUNDIR)" ; \ - echo "astlogdir => $(ASTLOGDIR)" ; \ - echo "" ; \ - echo "[options]" ; \ - echo ";verbose = 3" ; \ - echo ";debug = 3" ; \ - echo ";alwaysfork = yes ; same as -F at startup" ; \ - echo ";nofork = yes ; same as -f at startup" ; \ - echo ";quiet = yes ; same as -q at startup" ; \ - echo ";timestamp = yes ; same as -T at startup" ; \ - echo ";execincludes = yes ; support #exec in config files" ; \ - echo ";console = yes ; Run as console (same as -c at startup)" ; \ - echo ";highpriority = yes ; Run realtime priority (same as -p at startup)" ; \ - echo ";initcrypto = yes ; Initialize crypto keys (same as -i at startup)" ; \ - echo ";nocolor = yes ; Disable console colors" ; \ - echo ";dontwarn = yes ; Disable some warnings" ; \ - echo ";dumpcore = yes ; Dump core on crash (same as -g at startup)" ; \ - echo ";languageprefix = yes ; Use the new sound prefix path syntax" ; \ - echo ";internal_timing = yes" ; \ - echo ";systemname = my_system_name ; prefix uniqueid with a system name for global uniqueness issues" ; \ - echo ";autosystemname = yes ; automatically set systemname to hostname - uses 'localhost' on failure, or systemname if set" ; \ - echo ";maxcalls = 10 ; Maximum amount of calls allowed" ; \ - echo ";maxload = 0.9 ; Asterisk stops accepting new calls if the load average exceed this limit" ; \ - echo ";maxfiles = 1000 ; Maximum amount of openfiles" ; \ - echo ";minmemfree = 1 ; in MBs, Asterisk stops accepting new calls if the amount of free memory falls below this watermark" ; \ - echo ";cache_record_files = yes ; Cache recorded sound files to another directory during recording" ; \ - echo ";record_cache_dir = /tmp ; Specify cache directory (used in conjunction with cache_record_files)" ; \ - echo ";transmit_silence = yes ; Transmit silence while a channel is in a waiting state, a recording only state, or when DTMF is" ; \ - echo " ; being generated. Note that the silence internally is generated in raw signed linear format." ; \ - echo " ; This means that it must be transcoded into the native format of the channel before it can be sent" ; \ - echo " ; to the device. It is for this reason that this is optional, as it may result in requiring a" ; \ - echo " ; temporary codec translation path for a channel that may not otherwise require one." ; \ - echo ";transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of directly" ; \ - echo ";runuser = asterisk ; The user to run as" ; \ - echo ";rungroup = asterisk ; The group to run as" ; \ - echo ";lightbackground = yes ; If your terminal is set for a light-colored background" ; \ - echo "documentation_language = en_US ; Set the Language you want Documentation displayed in. Value is in the same format as locale names" ; \ - echo ";hideconnect = yes ; Hide messages displayed when a remote console connects and disconnects" ; \ - echo ";lockconfdir = no ; Protect the directory containing the configuration files (/etc/asterisk) with a lock" ; \ - echo "" ; \ - echo "; Changing the following lines may compromise your security." ; \ - echo ";[files]" ; \ - echo ";astctlpermissions = 0660" ; \ - echo ";astctlowner = root" ; \ - echo ";astctlgroup = apache" ; \ - echo ";astctl = asterisk.ctl" ; \ - echo "" ; \ - echo "[compat]" ; \ - echo "pbx_realtime=1.6" ; \ - echo "res_agi=1.6" ; \ - echo "app_set=1.6" ; \ - ) > $(DESTDIR)$(ASTCONFPATH) ; \ - else \ - echo "Skipping asterisk.conf creation"; \ - fi + if [ "$(OVERWRITE)" = "y" ]; then \ + echo "Updating asterisk.conf"; \ + sed \ + -e 's|^;astetcdir.*$$|;astetcdir => $(ASTETCDIR)|' \ + -e 's|^;astmoddir.*$$|;astmoddir => $(MODULES_DIR)|' \ + -e 's|^;astvarlibdir.*$$|;astvarlibdir => $(ASTVARLIBDIR)|' \ + -e 's|^;astdbdir.*$$|;astdbdir => $(ASTDBDIR)|' \ + -e 's|^;astkeydir.*$$|;astkeydir => $(ASTKEYDIR)|' \ + -e 's|^;astdatadir.*$$|;astdatadir => $(ASTDATADIR)|' \ + -e 's|^;astagidir.*$$|;astagidir => $(AGI_DIR)|' \ + -e 's|^;astspooldir.*$$|;astspooldir => $(ASTSPOOLDIR)|' \ + -e 's|^;astrundir.*$$|;astrundir => $(ASTVARRUNDIR)|' \ + -e 's|^;astlogdir.*$$|;astlogdir => $(ASTLOGDIR)|' \ + $(DESTDIR)$(ASTCONFPATH) > $(DESTDIR)$(ASTCONFPATH).tmp \ + && mv $(DESTDIR)$(ASTCONFPATH).tmp $(DESTDIR)$(ASTCONFPATH); \ + fi ;\ mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX build_tools/make_sample_voicemail $(DESTDIR)/$(ASTDATADIR) $(DESTDIR)/$(ASTSPOOLDIR) @mkdir -p $(DESTDIR)$(ASTDATADIR)/phoneprov diff --git a/configs/asterisk.conf.sample b/configs/asterisk.conf.sample new file mode 100644 index 000000000..06c7d6f97 --- /dev/null +++ b/configs/asterisk.conf.sample @@ -0,0 +1,83 @@ +[directories] +;astetcdir => /etc/asterisk +;astmoddir => /usr/lib/asterisk/modules +;astvarlibdir => /var/lib/asterisk +;astdbdir => /var/lib/asterisk +;astkeydir => /var/lib/asterisk +;astdatadir => /var/lib/asterisk +;astagidir => /var/lib/asterisk/agi-bin +;astspooldir => /var/spool/asterisk +;astrundir => /var/run/asterisk +;astlogdir => /var/log/asterisk + +[options] +;verbose = 3 +;debug = 3 +;alwaysfork = yes ; Same as -F at startup. +;nofork = yes ; Same as -f at startup. +;quiet = yes ; Same as -q at startup. +;timestamp = yes ; Same as -T at startup. +;execincludes = yes ; Support #exec in config files. +;console = yes ; Run as console (same as -c at startup). +;highpriority = yes ; Run realtime priority (same as -p at + ; startup). +;initcrypto = yes ; Initialize crypto keys (same as -i at + ; startup). +;nocolor = yes ; Disable console colors. +;dontwarn = yes ; Disable some warnings. +;dumpcore = yes ; Dump core on crash (same as -g at startup). +;languageprefix = yes ; Use the new sound prefix path syntax. +;internal_timing = yes +;systemname = my_system_name ; Prefix uniqueid with a system name for + ; Global uniqueness issues. +;autosystemname = yes ; Automatically set systemname to hostname, + ; uses 'localhost' on failure, or systemname if + ; set. +;maxcalls = 10 ; Maximum amount of calls allowed. +;maxload = 0.9 ; Asterisk stops accepting new calls if the + ; load average exceed this limit. +;maxfiles = 1000 ; Maximum amount of openfiles. +;minmemfree = 1 ; In MBs, Asterisk stops accepting new calls if + ; the amount of free memory falls below this + ; watermark. +;cache_record_files = yes ; Cache recorded sound files to another + ; directory during recording. +;record_cache_dir = /tmp ; Specify cache directory (used in conjunction + ; with cache_record_files). +;transmit_silence = yes ; Transmit silence while a channel is in a + ; waiting state, a recording only state, or + ; when DTMF is being generated. Note that the + ; silence internally is generated in raw signed + ; linear format. This means that it must be + ; transcoded into the native format of the + ; channel before it can be sent to the device. + ; It is for this reason that this is optional, + ; as it may result in requiring a temporary + ; codec translation path for a channel that may + ; not otherwise require one. +;transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of + ; directly. +;runuser = asterisk ; The user to run as. +;rungroup = asterisk ; The group to run as. +;lightbackground = yes ; If your terminal is set for a light-colored + ; background. +documentation_language = en_US ; Set the language you want documentation + ; displayed in. Value is in the same format as + ; locale names. +;hideconnect = yes ; Hide messages displayed when a remote console + ; connects and disconnects. +;lockconfdir = no ; Protect the directory containing the + ; configuration files (/etc/asterisk) with a + ; lock. + +; Changing the following lines may compromise your security. +;[files] +;astctlpermissions = 0660 +;astctlowner = root +;astctlgroup = apache +;astctl = asterisk.ctl + +[compat] +pbx_realtime=1.6 +res_agi=1.6 +app_set=1.6 |