diff options
-rw-r--r-- | doc/misdn.txt | 56 |
1 files changed, 6 insertions, 50 deletions
diff --git a/doc/misdn.txt b/doc/misdn.txt index e5fe4030e..0ec575b6d 100644 --- a/doc/misdn.txt +++ b/doc/misdn.txt @@ -11,8 +11,10 @@ Features: * NT and TE mode * PP and PMP mode * BRI and PRI (with BNE1 and BN2E1 Cards) +* Hardware Bridging * DTMF Detection in HW+mISDNdsp (much better than asterisks internal!) -* Display Messages to Phones (which support display msg) +* Display Messages on Phones (which support display msg) +* app_SendText * HOLD/RETRIEVE/TRANSFER on ISDN Phones : ) * Screen/ Not Screen User Number * Basic EchoCancellation @@ -41,7 +43,6 @@ Overview - misdn cli commands - Debugging and sending Bugreports - Examples -- Known working Configurations - Known Problems - Changes @@ -70,7 +71,7 @@ Please Note that mISDN works good for the linux-2.6.x kernels. Some of the mISDN drivers do not compile against the 2.4.x or older kernels, you can patch them, but than you'll get mysterious errors. -Using Kernels > 2.6.9 works perfect. +Using Kernels > 2.6.12 works perfect. Ok so far so good, now follow the compilation instructions. @@ -94,7 +95,7 @@ Installation Chan_misdn is automatically installed by the asterisk installation process. There is a sample init.d script for loading the mISDN modules (mISDN.sample), -5Asimply copy it to /etc/init.d/ and modify it, there you can enter your cards. +simply copy it to /etc/init.d/ and modify it, there you can enter your cards. !! Forget to use capi together with chan_misdn. @@ -140,10 +141,6 @@ should insert here the msns which you'll like to give the Asterisk). Finally a context variable resides in the user sections, which tells chan_misdn where to send incoming calls to in the Asterisk dial plan (extension.conf). -In NT-Mode Ports there is a new option, directly after the port number you can -write ptp, this enables PP Mode for this port, please look at misdn.conf.sample for -an example. - Dial and Options String ----------------------- @@ -272,48 +269,6 @@ exten => _1X.,1,Dial(mISDN/g:${OUT_GROUP}/${EXTEN:1}/:dHello Test:n) In the last line you will notice the last argument (Hello), this is sended as Display Message to the Phone. - -Known working configurations ----------------------------- - -In this section I'll put working configurations for chan_misdn. Beware It -seems that between Kernel 2.6.3 and Kernel 2.6.8 there were lots of mISDN -Bugs. I use Kernel 2.6.9 now, it works quite ok, Kernel 2.6.10+ has changed -the pci_find_subgsys funktion, so hfc_multi from mISDN doesn't compile against -it, you can just change pci_find_subsys to pci_get_subsys, this works. - - -- chan_misdn-0.0.3-rc1: - * linux-kernel >= 2.6.3 (but at least 2.6) - * asterisk >= v1-0 - * mISDN/mISDNuser since September/04 - -- chan_misdn-0.0.3-rc3: - * linux-kernel >= 2.6.3 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser since December/04 - -- chan_misdn-0.0.3-rc4: - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser head on cvs.isdn4linux.de - -- chan_misdn-0.0.3-rc6: - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 - * mISDN/mISDNuser head on cvs.isdn4linux.de - -- chan_misdn-0.1.0 - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1-0.2 , also CVS Head - * mISDN/mISDNuser (3.0-beta) from isdn.jolly.de - -- chan_misdn-0.2.1 - * linux-kernel >= 2.6.8 (but at least 2.6) - * asterisk >= v1.2 , also CVS Head - * mISDN/mISDNuser (3.0) from isdn.jolly.de - - Known Problems -------------- @@ -330,6 +285,7 @@ modules) then modprobe ztdummy, this resolves the problem. -> you forgot to load mISDNdsp, which is now needed by chan_misdn for switching and dtmf tone detection + * I have strange ISDN behavior: sometimes I hear the other end, sometimes not. Also I get STATUS Events with cause 100, with misdn debugging |