diff options
Diffstat (limited to '1.4.23-rc4/configs/sla.conf.sample')
| -rw-r--r-- | 1.4.23-rc4/configs/sla.conf.sample | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/1.4.23-rc4/configs/sla.conf.sample b/1.4.23-rc4/configs/sla.conf.sample deleted file mode 100644 index fa768c513..000000000 --- a/1.4.23-rc4/configs/sla.conf.sample +++ /dev/null @@ -1,140 +0,0 @@ -; -; Configuration for Shared Line Appearances (SLA). -; -; See doc/sla.pdf for more information. -; - -; ---- General Options ---------------- -[general] - -;attemptcallerid=no ; Attempt CallerID handling. The default value for this - ; is "no" because CallerID handling with an SLA setup is - ; known to not work properly in some situations. However, - ; feel free to enable it if you would like. If you do, and - ; you find problems, please do not report them. -; ------------------------------------- - - -; ---- Trunk Declarations ------------- -; -;[line1] ; Provide a name for this trunk. - -;type=trunk ; This line is what marks this entry as a trunk. - -;device=Zap/3 ; Map this trunk declaration to a specific device. - ; NOTE: You can not just put any type of channel here. - ; Zap channels can be directly used. IP trunks - ; require some indirect configuration which is - ; described in doc/sla.pdf. - -;autocontext=line1 ; This supports automatic generation of the dialplan entries - ; if the autocontext option is used. Each trunk should have - ; a unique context name. Then, in chan_dahdi.conf, this device - ; should be configured to have incoming calls go to this context. - -;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging - ; it up as an unanswered call. The value is in seconds. - -;barge=no ; If this option is set to "no", then no station will be - ; allowed to join a call that is in progress. The default - ; value is "yes". - -;hold=private ; This option configure hold permissions for this trunk. - ; "open" - This means that any station can put this trunk - ; on hold, and any station can retrieve it from - ; hold. This is the default. - ; "private" - This means that once a station puts the - ; trunk on hold, no other station will be - ; allowed to retrieve the call from hold. - -;[line2] -;type=trunk -;device=Zap/4 -;autocontext=line2 - -;[line3] -;type=trunk -;device=Zap/3 -;autocontext=line3 - -;[line4] -;type=trunk -;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa - ; application can be used to support IP trunks. - ; See doc/sla.pdf on more information on how - ; IP trunks work. -;autocontext=line4 -; -------------------------------------- - - -; ---- Station Declarations ------------ - -;[station1] ; Define a name for this station. - -;type=station ; This line indicates that this entry is a station. - -;device=SIP/station1 ; Each station must be mapped to a device. - -;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if - ; the autocontext option is used. All stations can use the same - ; context without conflict. The device for this station should - ; have its context configured to the same one listed here. - -;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an - ; incoming call, in seconds. - -;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station - ; once there is an incoming call, in seconds. - -;hold=private ; This option configure hold permissions for this station. Note - ; that if private hold is set in the trunk entry, that will override - ; anything here. However, if a trunk has open hold access, but this - ; station is set to private hold, then the private hold will be in - ; effect. - ; "open" - This means that once this station puts a call - ; on hold, any other station is allowed to retrieve - ; it. This is the default. - ; "private" - This means that once this station puts a - ; call on hold, no other station will be - ; allowed to retrieve the call from hold. - - -;trunk=line1 ; Individually list all of the trunks that will appear on this station. This - ; order is significant. It should be the same order as they appear on the - ; phone. The order here defines the order of preference that the trunks will - ; be used. -;trunk=line2 -;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk. - ; If a ring delay is specified both for the whole station and for a specific - ; trunk on a station, the setting for the specific trunk will take priority. - ; This value is in seconds. - -;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk. - ; If a ring timeout is specified both for the whole station and for a specific - ; trunk on a station, the setting for the specific trunk will take priority. - ; This value is in seconds. - - -;[station](!) ; When there are a lot of stations that are configured the same way, - ; it is convenient to use a configuration template like this so that - ; the common settings stay in one place. -;type=station -;autocontext=sla_stations -;trunk=line1 -;trunk=line2 -;trunk=line3 -;trunk=line4 - -;[station2](station) ; Define a station that uses the configuration from the template "station". -;device=SIP/station2 -; -;[station3](station) -;device=SIP/station3 -; -;[station4](station) -;device=SIP/station4 -; -;[station5](station) -;device=SIP/station5 -; -------------------------------------- - |